Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequent BSOD after fresh Install on new SSD BPC1:C04FBCD0

17 Sep 2014   #1
sagrawal9

Win 7 ultimate 32
 
 
Frequent BSOD after fresh Install on new SSD BPC1:C04FBCD0

Folks,

First thanks for the forum and all working and helping here.
I have a Lenovo T400 laptop, where I did a fresh install of Win 7 ultimate on new SSD. After trial and errors, the install was successful and I have been using it consistently for the last three months. However once in a while, the computer will display BSOD.
I have noticed this happens , when sometimes Adobe update happens.. not sure whether this is true or not. or When IE is very busy.. just some observation.
Today I put on USB drive and the system tried to install the driver and then BSOD again.
The dump zip is included here and looking for some help please.
Thanks.


My System SpecsSystem Spec
.
17 Sep 2014   #2
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Welcome to 7F.

The first thing I'd like you to try is run a diagnostic check on your RAM to rule out a faulty module.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {c04e5d98, c000000e, bbae820, 9cbb3154}

Probably caused by : memory_corruption ( nt!MiWaitForInPageComplete+302 )

Followup: MachineOwner
Download and run MemTest86+ to test your RAM.

Note   Note
Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Report back with the results.
My System SpecsSystem Spec
17 Sep 2014   #3
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Welcome to SevenForums,

The BSOD reports a memory corruption.
Code:
Probably caused by : memory_corruption
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
I would recommend to leave this running overnight as this can take some time.
My System SpecsSystem Spec
.

17 Sep 2014   #4
HarriePateman

Windows 7 Ultimate 64-bit
 
 

Quote   Quote: Originally Posted by Boozad View Post
Welcome to 7F.

The first thing I'd like you to try is run a diagnostic check on your RAM to rule out a faulty module.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {c04e5d98, c000000e, bbae820, 9cbb3154}

Probably caused by : memory_corruption ( nt!MiWaitForInPageComplete+302 )

Followup: MachineOwner
Download and run MemTest86+ to test your RAM.

Note   Note
Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


Report back with the results.
Sorry mate, we both posted at the same time.
My System SpecsSystem Spec
17 Sep 2014   #5
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Quote   Quote: Originally Posted by HarriePateman View Post
Sorry mate, we both posted at the same time.
Not a problem Harrie.
My System SpecsSystem Spec
Reply

 Frequent BSOD after fresh Install on new SSD BPC1:C04FBCD0




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Frequent BSOD After Fresh Install Error 0x0000000A
I have a fresh install of windows 7 ultimate, and I have experienced 3 BSODs since last night. I just downloaded a bios update from my motherboard's site, but I am waiting to flash it until I get some input from you guys. The last three times it seems that the cause of the BSOD was from...
BSOD Help and Support
Frequent BSOD even with fresh install and hardware check...
Hi everyone, My mom's pc, that I've build, is having serious issues. The frequence of BSOD's was almost one every hours... So I've decided first to format and install Win 7 x64 ultimate, then I installed the up to date drivers (Lan, sound, chipset, gpu, webcam...) some were installed via the...
BSOD Help and Support
Frequent BSOD on fresh install multiple errors
This could be a separate issue altogether but I have been unable to install the majority of windows updates (120 updates mainly consisting of windows 7 updates, security updates and .net framework updates.) This build ran brilliant to start, until about 6 months ago I began getting frequent...
BSOD Help and Support
Random and very frequent BSOD on a fresh Windows 7
Hi everyone, as of three days ago I was getting constant BSOD on my Windows 8, so I wiped the harddrive and installed Windows 7 instead. When I installed Windows 7, I got the BSOD again at random time intervals and it was very frequent. Do note that I had literally no programs on my Windows 7 when...
BSOD Help and Support
BSOD playing Guild Wars 2, recent SSD install and fresh install of W7
I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time. I ran and uploaded the...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App