Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD playing world of tanks w/ browser running in background

20 Sep 2014   #1
hudstr

Windows 8.1 x64
 
 
BSOD playing world of tanks w/ browser running in background

Long story short built I this computer for crypto-currency mining but couldn't get it stable, now I am trying to play some games on it but it still BSODs. I don't know much about bsod or troubleshooting but from what i remember it always showed up as the same error on the bsod (0ax000001 not sure how many zeros there were after the "x").


My System SpecsSystem Spec
.
20 Sep 2014   #2
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

There are some important files missing from your logs, please run the DM Log Collector again and upload the new logs.
My System SpecsSystem Spec
20 Sep 2014   #3
hudstr

Windows 8.1 x64
 
 

Hopefully i did it right this time.
My System SpecsSystem Spec
.

20 Sep 2014   #4
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Yep, all there now. I'll take a look shortly but I'm not fully conversant with W8.1, if there is anything that would benefit from an 8.1 analyst looking at it I'll recommend you post your logs over on Windows 8 Forums
My System SpecsSystem Spec
20 Sep 2014   #5
hudstr

Windows 8.1 x64
 
 

yeah that probably would make more sense,I was just googling bsod and this popped up in the top results so I just automatically went to here, did think far ahead enough to look for a windows 8 forum
My System SpecsSystem Spec
20 Sep 2014   #6
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

OK, turns out it was pretty simple. Every dump is singling out your ATI drivers.

Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A0000001, {5, 0, 0, 0}

Probably caused by : atikmdag.sys ( atikmdag+2783e )

Followup: MachineOwner
Code:
1: kd> lmvm atikmdag
start             end                 module name
fffff800`84ca1000 fffff800`85991000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Sat Jul 05 02:39:13 2014 (53B75741)
    CheckSum:         00CA8DE5
    ImageSize:        00CF0000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download the 13.9 driver from here then use AMD Uninstall Utility to remove all traces of your current driver, CCC etc. Reboot and install the 13.9 driver.

Note   Note
When installing choose 'Advanced' or 'Custom' (whichever option is available, just not Express) and uncheck everything except the video driver.


Test and report back.
My System SpecsSystem Spec
20 Sep 2014   #7
hudstr

Windows 8.1 x64
 
 

well I just bsod'ed again. I installed catalyst 13.9 and unchecked the other driver stuff like the hdmi audio and the 3d driver thingy.
My System SpecsSystem Spec
20 Sep 2014   #8
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Same again, your ATI driver. Just to double check, you did uninstall all components of your previous driver before installing 13.9? If so, let's concentrate on your GPU.

Run Furmark to stress test your GPU. Video Card - Stress Test with Furmark

Note   Note
Run Furmark for around 30 minutes.

warning   Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them, if the temperature continues to rise steadily once it has reached 80C be prepared to stop the test so as to not damage your GPU.
My System SpecsSystem Spec
20 Sep 2014   #9
hudstr

Windows 8.1 x64
 
 

yep I uninstalled the drivers control pannel>uninstall program> catalyst control center
My System SpecsSystem Spec
20 Sep 2014   #10
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

OK, give Furmark a spin and see what happens.
My System SpecsSystem Spec
Reply

 BSOD playing world of tanks w/ browser running in background




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD When playing World Of Tanks
Hi, I'm having issues with different BSODs but seems to only happen when playing World Of Tanks and some web browsing. Graphics driver has been updated and that's about it. Any help would be greatly appreciated.
BSOD Help and Support
BSOD While playing World of Tanks
Hi everyone:) I upgraded my video card last year before Christmas with a GeForce GTX 650, in february i also changed my old hdd and added a 1TB WD Blue. Problems started like two weeks before Easter in which i received BSOD's almost every day and i didn't knew what was the problem. On 2nd day...
BSOD Help and Support
BSOD when playing World of tanks
Hi I need some help , my desktop is crashing randomly when playing games on it I attached the minidump file as instucted and also I tried using bluescreen viewer but I dont know how to fix it. Any help would be highly appreciated . thanks in Advance!
BSOD Help and Support
BSOD playing world of tanks
BSOD playing world of tanks
BSOD Help and Support
BSOD playing World of Tanks
Hi, i had a BSOD while playing WoT, well, i didnt see a BSOD cause my system freezed...i dont see a bluescreen ever, the only thing that happens is that my machine freezes, only with bluescreenviewer i see that it has been a BSOD, or not. so here are some infos: - x86 (32-bit) or x64 ? x64 -...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App