Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when switching to TV

23 Sep 2014   #1
Nizzeh

Windows 7 Home Premium 64-bit
 
 
BSOD when switching to TV

Hi there, my computer is a relatively new custom build and I have been getting a lot of BSODs recently. Any help is appreciated,

Thanks!


My System SpecsSystem Spec
.
23 Sep 2014   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hi, Nizzeh and welcome to Seven Forums. Unfortunately, your dump files are not telling me too much right now. Three of them showed this
Code:
igdkmd64
start             end                 module name
fffff880`04afc000 fffff880`04f14000   igdkmd64 T (no symbols)           
    Loaded symbol image file: igdkmd64.sys
    Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
    Image name: igdkmd64.sys
    Timestamp:        Mon Sep 16 19:08:54 2013 (52379D96)
    CheckSum:         003FE60C
    ImageSize:        00418000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Intel graphics adapter which you should first go to your motherboard's web site for your board and see if they have an updated driver later than the date above. also
Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs
then

Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
My System SpecsSystem Spec
24 Sep 2014   #3
Nizzeh

Windows 7 Home Premium 64-bit
 
 

Hi there,

thank you so much for your reply! I've downloaded the latest graphics driver from my motherboard's website and the sfc scan found no integrity violations. I've also filled out my system specs.

Thanks again!
My System SpecsSystem Spec
.

24 Sep 2014   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Great, try that and see if it helps. If not, we'll try something else. Just let me know either way,
My System SpecsSystem Spec
01 Oct 2014   #5
Nizzeh

Windows 7 Home Premium 64-bit
 
 

Hi there,

Installed my new graphics card on Saturday and no problems until today. Attached the reports.
My System SpecsSystem Spec
01 Oct 2014   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please download and install CPUz (CPU-Z CPUID - System & hardware benchmark, monitoring, reporting) and post a screenshot
(Screenshots and Files - Upload and Post in Seven Forums) of the CPU, Mainboard, Memory and SPD tabs. On the SPD tab, you can select each Dimm slot from a dropdown list in the upper left of the screen, I only need the Dimm slots populated with ram.
My System SpecsSystem Spec
01 Oct 2014   #7
Nizzeh

Windows 7 Home Premium 64-bit
 
 

My System SpecsSystem Spec
01 Oct 2014   #8
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Your ram is OK the way it is set, although it will run faster.

Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
My System SpecsSystem Spec
02 Oct 2014   #9
Nizzeh

Windows 7 Home Premium 64-bit
 
 

HI there,

Got to 8 passes then woke up. No errors. Anyway I can speed up my RAM?
My System SpecsSystem Spec
02 Oct 2014   #10
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

In your bios you should be able to enable XMP profile, which should set it for you.

warning   Warning
Be sure to create a System Restore point before proceeding further System Restore Point - Create


Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
information   Information

What is Driver Verifier:
It puts stress on the drivers, and tries to make the faulty driver crash the computer. It is designed this way, to attempt to trap the offending driver.


What you will notice:
It will tend to make the computer rather slow and sluggish because the drivers are being stressed.
warning   Warning

Before enabling DV, make sure you have created a system restore point before enabling Driver Verifier. make a System Restore Point manually before enabling DV.


Tip   Tip




Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
Reply

 BSOD when switching to TV




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after switching User
Computer remains stable in the first user selected after booting. After switching to another user, BSOD happens after a few minutes, even when (apparently) no user programs are being run. Most recent case - switched user - a few minutes using Quicken 2004, program closed OK, when I looked at the...
BSOD Help and Support
BSOD after switching antivirus
Hey everyone my roommates laptop exploded with BSOD this past week and i cant pin point what it could be, he did have 2 antivirus programs at one point installed but i removed one of them but then the BSOD still kept happening. I included the zip files for you guys to look at and thanks for any...
BSOD Help and Support
BSOD when first switching on PC
Hi, I have BSOD everytime i switch on my PC..hope you guys can help analyze the dump files as attached. thank you :)
BSOD Help and Support
BSOD when first switching on PC
Hi team, Appreciate your help here, I do not really encounter BSOD when I am doing my things in the PC but usually everytime the next day after i first switch on my PC, i will have blue screen saying something like a software/hardware failed to load or something. FYI i always shut down my PC...
BSOD Help and Support
BSOD Possible GPU Switching related
bought an alienware m17x r3 last september, when i received it i fitted a SSD (re installed windows) and another 4gb ram. Spec: 7 x64 Ultimate (originally with premium) SSD + Slave Hdd gtx560m Machine will bluescreen when left alone for periods of time, not over heating, not under...
BSOD Help and Support
Switching drivers when switching users?
Hi guy's just wondering if it's possible to get windows 7 to switch audio drivers when you switch to another user account. For eg.. normal speakers device for my personal account and then have my multichannel device (profire 2626) set as default for my other user account 4 studio work. Atm,...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App