Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD - error 1E

25 Sep 2014   #1
tgmorris99

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Random BSOD - error 1E

I've got a new build which I originally started out by replacing the mobo and keeping the existing Windows install. However I wound up doing a fresh install but have been encountering what seem like random BSODs. I thought I had it figured out as it was finally stable for a couple of days so I reinstalled a usb 3.0 driver for the 5.25 media dashboard (Renasas driver) and things quickly went south again. I did a system restore to back it out but I'm still getting BSODs.

What I've done to date to verify the HW:

Memtest86+ (5.01) for 9 passes (overnight) w/no errors
Prime95 for 4 hours
I've run the x264 stability test w/no problems
sfc /scannow (no errors)

I'm pretty sure the HW is good at this point and the Intel site says all the chipset drivers are current. I've also updated the realtek network & audio drivers.

The crashes can happen when waking from sleep or just browsing and the attached dump is from a crash that happened overnight during the nightly backup to my WHS. Since all the dumps blame the kernel it's almost got to be a driver related issue but I've yet to run driver verifier.

From a performance standpoint the system is great but I certainly favor stability over speed as it's just an everyday setup. Any help will be appreciated.


My System SpecsSystem Spec
.
25 Sep 2014   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I know you said that you ran memtest but this is what the dump file shows.
Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80001f09c27, 0, ffffffffffffffff}
Probably caused by : memory_corruption ( nt!MiResolveMappedFileFault+97 )
Followup: MachineOwner
My System SpecsSystem Spec
25 Sep 2014   #3
tgmorris99

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hmmm. I'm in the middle of running another sequence that I started this morning and will be through 8 passes in another hour or so.

Is it possible the memory corruption is the result of a bad driver?
My System SpecsSystem Spec
.

25 Sep 2014   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I guess it could possibly be, but there are no drivers for ram. But, I guess it's possible.
My System SpecsSystem Spec
25 Sep 2014   #5
tgmorris99

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I guess it could be the PSU but it's the same one I was using with the other mobo and that one was running a 9400GT video card and all the other HW was the same w/no BSODs. The new bits now are the GA-Z97-HD3 mobo, G3258 and the memory. If the memory passes again I guess it could still be the problem when under stress but last night it was just doing a WHS backup of the SSD when it crashed.

I'm open to any suggestions for further testing.

Once the memory tests are done I'll boot back up and run the verifier to see if I can catch anything that way.
My System SpecsSystem Spec
25 Sep 2014   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If you run verifier, run it this way but, make a restore point first
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
information   Information

What is Driver Verifier:
It puts stress on the drivers, and therefore it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.


How we know that DV is enabled:
It will make the system bit slow and sluggish.
warning   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there are no Restore points, make a System Restore Point manually before enabling DV.


Tip   Tip




Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
25 Sep 2014   #7
tgmorris99

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Here's the results of the latest Memtest86+. Basically, nothing to report.

I'll start driver verifier tonight and see where that leads.
My System SpecsSystem Spec
25 Sep 2014   #8
tgmorris99

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Well, it didn't take long as it never made it to the desktop. I got as far as the "Please Wait" before it crashed and rebooted and crashed again. I had to power cycle it to get it to boot into safe mode. I looked and there are 2 new dumps so hopefully this will point to the culprit.
My System SpecsSystem Spec
25 Sep 2014   #9
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Here's what the dumps say

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80001f09c27, 0, ffffffffffffffff}
Probably caused by : memory_corruption ( nt!MiResolveMappedFileFault+97 )
Followup: MachineOwner
Code:
gdrv
start             end                 module name
fffff880`1891b000 fffff880`18924000   gdrv     T (no symbols)           
    Loaded symbol image file: gdrv.sys
    Image path: \??\C:\Windows\gdrv.sys
    Image name: gdrv.sys
    Timestamp:        Thu Mar 12 22:22:29 2009 (49B9D175)
    CheckSum:         000105CE
    ImageSize:        00009000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That's the Gigabyte Easy Saver - mobo power utility driver
My System SpecsSystem Spec
27 Sep 2014   #10
tgmorris99

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I managed to get it so gdrv.sys would load and things were running with the verifier still active. However there were still some remnants of the Gigabyte SW hanging around even after uninstalling everything. So I bit the bullet and did a clean install from scratch again without using the CA supplied CD and I think I'm good to go at this point.

I've yet to install the Renasas driver as I want to make sure the system is stable so if anything happens I'll know where to look but, fingers crossed, so far so good.

Thanks for the help.
My System SpecsSystem Spec
Reply

 Random BSOD - error 1E




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD's at random times often error 0x0000001E
Hello, after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
Random BSOD stop error 0x0000001E, hardware error?
Hello, A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD...
BSOD Help and Support
Random BSOD's random error codes
Recently had my computer open and lying on it's side for around 5 days, put the cover back on and booted it up to play some WoW and started having BSOD's, constantly at windows log in, or 5-30 mins sitting at desktop or playing games. Including zipped folder of eventvwr files. Thanks in advance!
BSOD Help and Support
Random BSOD during Random times, error 0x8000000000000002
Hey everyone, Im new here on this forum. I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly. What happenes is that everything becomes unresponsive; cant...
BSOD Help and Support
Random BSOD's with random error messages after a new setup
Hey! I recently upgraded my setup with an Asus M4A78LT-M mobo, Athlon II X4 640 processor and TakeMS 2x2GB 1333MHz DDR3 memory. After installing the parts I tried to boot to Windows but it always resulted in the same BSOD so I reinstalled my system. After installing Windows for the first time...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App