Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after start up and no restore points

25 Sep 2014   #1
DaveMac5935

Window home premium 64 bit SP1
 
 
BSOD after start up and no restore points

Having trouble finding why my computer is going blue screen. sometimes it will let you start a program other times it will go in just a few minutes. below is the window error screen and there's a file attached.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF8000F4DCC3F
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1



My System SpecsSystem Spec
.
26 Sep 2014   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome Dave mate can you boot into safe mode and run these first up

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary
My System SpecsSystem Spec
26 Sep 2014   #3
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff8000f4dcc3f}

*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
Probably caused by : NETIO.SYS ( NETIO!WfpExpireEntryLru+17 )

Followup: MachineOwner
---------
It would appear Symantec/Norton is the cause of the problems. Replace it with MSE, and monitor for further BSOD's.

Driver Reference Table - SYMNETS.SYS
My System SpecsSystem Spec
.

Reply

 BSOD after start up and no restore points




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD after start up, no error message, no restore points
Hello every one, Well, i thought i knew something from computers, but with this problem i am out of ideas. Acer laptop 5530G, new mainboard worked for an month. Then after starting up windows 7 - 32bit, get the windows logo, and then i just get a black screen with mouse pointer that can be...
BSOD Help and Support
System Restore Error, Unable to Create Restore Points
Hello everyone, not sure why but I get an error every time I open the System Restore. I rarely have to use a restore point as I regularly maintain my computer and check for viruses and malware, but I would like to have the option just in case. When I open System Properties, and click the System...
Backup and Restore
Allocated System Restore space holds far fewer restore points now
I have 8gb of space allocated to System Restore, all monitoring my C partition only. This space is always at least 85-90% used according to the System Protection screen. In the past I have had at least 15 restore points to choose from after ticking "show more restore points." But today I went to...
Backup and Restore
System Restore Has Stopped Automatically Creating Restore Points
My last automatically System Restore Point automatically created by the passage of time was created 2013-01-23. No further automatic system restore points are being created (that means not ever, not daily, not weekly, simply no longer created automatically by the passage of time since last...
Backup and Restore
No system restore points after Windows wouldn't start
I got message in Word that there was insufficienmt memory to perform an operation so I rebooted. My PC wouldn't reboot and there was no last known good configuration so I ended up having to reinstall windows (had only installed it a month ago) Why should there have been no restore pointsa? Doesn't...
Backup and Restore
Can I Pause/Turn off System Restore WITHOUT losing restore points?
I work with a large software suite. The installer for this suite is really just a collection of many stand-alone installers. If SR is on when I run the installation, it takes a very long time. Additionally, since this is a collection of other installers, SR is somewhat useless to use as a...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App