How to fix BSOD KERNEL_DATA_INPAGE_ERROR 0x0000007A?

eloiseverona said:

Hi,

I got BSOD today. A few minutes ago.

eloiseverona said:

And another BSOD while using the laptop 5 minutes ago. The first BSOD was when in a sleep mode then I try to start to use it again, it went to BSOD.

eloiseverona said:

Another BSOD while using the laptop 19 minutes ago. :'(

If you want to report a BSOD, it should be done following the Blue Screen of Death (BSOD) Posting Instructions.

We cannot say anything without checking the data.

Same issue continues.

Code:

BugCheck 7A, {c04d93e8, c0000185, 25d9c8c0, 9b27d000}

Probably caused by : memory_corruption ( nt!MiWaitForInPageComplete+302 )

Followup: MachineOwner
---------

Code:

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c04d93e8, lock type that was held (value 1,2,3, or PTE address)
Arg2: c0000185, error status (normally i/o status code)
Arg3: 25d9c8c0, current process (virtual address for lock type 3, or PTE)
Arg4: 9b27d000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Code:

ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

Take the Long Generic Test using Seatools for DOS.

SeaTools for DOS and Windows - How to Use

Let us know the result.

It should be in advanced BIOS settings.

Do you have anything in advanced called sata configuration, storage or anything like that? on some of the OEM Machines you will find a menu within another menu. A sub menu.