Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Lots of BSOD problems lately

03 Oct 2014   #1
Johnny006

Windows 7 Ultimate 64bit
 
 
Lots of BSOD problems lately

Hi there everybody!
Lately I had many BSODs and I do not know why is that. So I included my dump memories. BSODs happened while playing games, watching films even while doing nothing.
I have everything installed the same way as my last PC and there were none BSODs so I am really helpless at this poin.
Thanks for the help and advices


My System SpecsSystem Spec
.
04 Oct 2014   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello Johnny006, welcome to Seven Forums. You have quite a few dump files. I looked through most of them. Almost every error was a different big check and most were listed as different causes. Most of the time if you get those type of results, the problem lies in your memory or system files have been tampered with or corrupted. What I found the closer to the first one is what could be the real problem

Code:
BugCheck D1, {ffffffffc00000bb, 2, 1, fffff88007bbe0e6}
Probably caused by : hardware ( intelppm!ValidatePStateCapability+16 )
Followup: MachineOwner

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 4E, {2, 97f4, 21dfff, 1}
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+8d )
Code:
BugCheck 3B, {c0000005, fffff80002ea97e0, fffff8800cb87850, 0}
Probably caused by : memory_corruption ( nt!MiAllocatePagedPoolPages+14 )
Followup: MachineOwner

Code:
 atikmpag
start             end                 module name
fffff880`07915000 fffff880`079b8000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Thu Apr 17 20:07:07 2014 (53507ABB)
    CheckSum:         000A6939
    ImageSize:        000A3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please make sure your Firmware on your SSD is up to date and all Motherboard drivers are updated from your Motherboards Web Site.

Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask

Just in case you would like to see some of the other errors I found I will post them, but I think these may be the victims of the errors I posted above and not the cause.


Code:
 Loaded symbol image file: dump_iaStorA.sys
 Image path: \SystemRoot\System32\Drivers\dump_iaStorA.sys
 
Image name: dump_iaStorA.sys
Timestamp: Fri May 02 18:06:56 2014 (53642510) CheckSum: 000B0574
ImageSize: 002C9000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
HIDCLASS
start end module name fffff880`08c12000 fffff880`08c2b000 HIDCLASS (pdb symbols) c:\symcache\hidclass.pdb\908D3A09383140B98D64BBD8D1B041711\hidclass.pdb
Loaded symbol image file: HIDCLASS.SYS Mapped memory image file: c:\symcache\HIDCLASS.SYS\51D3A2F119000\HIDCLASS.SYS Image path: \SystemRoot\system32\DRIVERS\HIDCLASS.SYS Image name: HIDCLASS.SYS Timestamp: Tue Jul 02 23:05:05 2013 (51D3A2F1) CheckSum: 00016FD9 ImageSize: 00019000 File version: 6.1.7601.18199 Product version: 6.1.7601.18199 File flags: 0 (Mask 3F) File OS: 40004 NT Win32 File type: 2.0 Dll File date: 00000000.00000000 Translations: 0409.04b0 CompanyName: Microsoft Corporation ProductName: Microsoft® Windows® Operating System InternalName: hidclass.sys OriginalFilename: hidclass.sys ProductVersion: 6.1.7601.18199 FileVersion: 6.1.7601.18199 (win7sp1_gdr.130702-1534) FileDescription: Hid Class Library LegalCopyright: © Microsoft Corporation. All rights reserved.
CLASSPNP
start end module name fffff880`01d6d000 fffff880`01d9d000 CLASSPNP (pdb symbols) c:\symcache\classpnp.pdb\09E4EA6804D54FD3A6D8DAD298C55FCD2\classpnp.pdb
Loaded symbol image file: CLASSPNP.SYS Mapped memory image file: c:\symcache\CLASSPNP.SYS\4CE7929B30000\CLASSPNP.SYS Image path: \SystemRoot\system32\DRIVERS\CLASSPNP.SYS Image name: CLASSPNP.SYS Timestamp: Sat Nov 20 03:19:23 2010 (4CE7929B) CheckSum: 000318BE ImageSize: 00030000 File version: 6.1.7601.17514 Product version: 6.1.7601.17514 File flags: 0 (Mask 3F) File OS: 40004 NT Win32 File type: 3.7 Driver File date: 00000000.00000000 Translations: 0000.04b0 CompanyName: Microsoft Corporation ProductName: Microsoft® Windows® Operating System InternalName: Classpnp.sys OriginalFilename: Classpnp.sys ProductVersion: 6.1.7601.17514 FileVersion: 6.1.7601.17514 (win7sp1_rtm.101119-1850) FileDescription: SCSI Class System Dll LegalCopyright: © Microsoft Corporation. All rights reserved.
My System SpecsSystem Spec
04 Oct 2014   #3
Johnny006

Windows 7 Ultimate 64bit
 
 

So here are some results.
My drivers and firmware are up to date and the integrity check did not find anything.
I got a question about the memory test. Do I need to watch it while testing or I just run it and then go to sleep and in the morning I will have the results?
My System SpecsSystem Spec
.

04 Oct 2014   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

No, you don't need to watch it. If you happen to see an error, stop it. It won't hurt to keep running it, but after an error it isn't necessary. Even 1 error is a fail. But, no need to watch it.
My System SpecsSystem Spec
05 Oct 2014   #5
Johnny006

Windows 7 Ultimate 64bit
 
 

No errors found. So what to do now?
My System SpecsSystem Spec
05 Oct 2014   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If you are overclocking anything, set everything back to default levels. check your hard drives for errors. Western Digital's diagnostic test is Data Lifeguard for DOS (WD Support / Downloads / SATA & SAS / WD Black) they have 2 tests, one for DOS which you boot into the CD or USB drive you create or one that installs. The one for dos will give you a more thorough test as the hard drive is not in use, if you have trouble with that use the Data Lifeguard for Windows. You need to run the short and the long test on your Western Digital drive. Does the Kingston SSD have a tool box that will tell you the drive health and condition?
Also, if you don't already have it, please download and install CPUz ( CPU-Z CPUID - System & hardware benchmark, monitoring, reporting ) and install it. Post screenshots of the CPU, Mainboard, Memory and SPD tabs. On the SPD tabs in the upper left you can select each Dimm Slot. I only need the Dimm Slots that are populated with Ram. This will show you how to post screenshots here on Seven Forums.
Screenshots and Files - Upload and Post in Seven Forums

I need you to also monitor your CPU and GPU temps. If you don't already have programs to do that I can give you some suggestions.
My System SpecsSystem Spec
Reply

 Lots of BSOD problems lately




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Lots of problems with Windows 7 update......
Hi all, after some time spent trying to find a solution, I admit defeat - I cannot use Windows Update at all. I have followed the steps you advise before posting but alot have failed. I have tried downloading the SURT and a box appears saying 'Do you want to install the following Windows software...
Windows Updates & Activation
Lots of problems and can't re-install
Hi everyone, I won't go into details but I have 2 problems left on my PC whereby the only fix is a repair of windows. I put the DVD in, followed the tutorial on here but it keeps telling me the disk is an older version of windows than the one on my PC. The thing is this DVD I'm using to try to...
General Discussion
Lots of display problems
Yesterday my PC was working fine. I am having Windows 7 Ultimate x32 bit. Today I logged in and here is what happened 1) Only black screen instead of wallpaper. 2) No icon being loaded for everything. 3) This is a background which I applied again still no background.
Customization
Lots of problems
Two nights ago I had realized that I lost all sound and noises that Win7 usually makes. This didn't bother me too much, as I thought I could fix it by adjusting the mixer levels. I was completely wrong, I started to get worried and google'd answers. One of the responses was to hit the "Windows...
Windows Updates & Activation
Lots of BSOD & Hungup - Lots of Event17 WHEA-Logger
Hello everyone I've been getting this error again and again, and my computer is hungup or BSOD after awail...:mad: Do you know what can I do to fix it? Or what the problem is?? Thank you!! Asrock X58 Supercomputer bios 3.10 i7 920 (bloomfield) @2.67ghz -1.128vol.
BSOD Help and Support
Lots of Windows7 Problems
Hi, I don't really know how to group this, but recently I've been having alot of Windows7 problems. These are some of the ones I've noticed: Can't see changes made to folders until I manually refresh (Ctrl R) Windows Media Player crashes and doesn't load at all 90% of the time Doesn't...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App