Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ugh, BSOD after removing device

05 Oct 2014   #1
timeless

Windows 7 Professional (64bit)
 
 
ugh, BSOD after removing device

hopefully this isnt related to my previous bsodding issues, reason l havent posted it with it is because its been weeks since my last one since removing my ram and that this BSOD happened while tech-ing my new wireless adapter (replaced the old one which has major speed fluctuations) however l will note that unlike my previous adapter this one shows the safely remove hardware icon in the task bar.

you see ld been in contact with TP-Link to find out why my TL-WN722N only achieves 65mbps they suggested l try it in another system, so l popped it into my laptop and it seems it happens there as well it wont achieve anywhere near what my router is capable of (allegedly its 144mbps).

the blue screen error happened directly after removing the wireless adapter from my PC to try it in my laptop to see if anything changed. l have run the dm collector tool and attached the information below.


My System SpecsSystem Spec
.
05 Oct 2014   #2
HonorGamer

Windows 8.1 Pro x64
 
 

Hello,

Code:
etdrv.sys                   Thu Mar 19 21:59:06 2009
Driver Description: Generic Port I/O
May be part of Gigabyte Tools Easy Tune 6 (incompatible with Win7), please uninstall.

Code:
Probably caused by: athurx.sys ( athurx+8e26 ) 
BugCheck 1000007E
Quote:
Driver Description: Atheros AR9271 Wireless Network Adapter
As stated you have been having problems with this adapter. Have you tried completely uninstalling the drivers?
My System SpecsSystem Spec
05 Oct 2014   #3
timeless

Windows 7 Professional (64bit)
 
 

lve uninstalled easytune.

however with regards to the wireless adapter, my original adapter had the most issues, it was a (Tenda) W322U v2.0, the speed was all over the place despite excellent signal, the new adapter (TP-Link) TL-WN722N is more stable, no speed fluctuations whatsoever however considering its max speed is 150mbps l cant get it to connect faster than 65mbps which is annoying, the bsod l experienced was immediately after removing this adapter to test it in my laptop seeing if there was any difference, suffice to say the connection speed was exactly the same as my main system.
My System SpecsSystem Spec
.

05 Oct 2014   #4
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Hi timeless, HG asked one of us BSOD Team to drop by and have a look at your issue. If you don't mind I've taken a look and posted what I've found below.

Your Intel USB 3.0 Hub driver has been flagged.

Code:
fffff880`09383058  fffff880`04f81f00Unable to load image \SystemRoot\system32\DRIVERS\iusb3hub.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iusb3hub.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3hub.sys
 iusb3hub+0x19f00

0: kd> lmvm iusb3hub
start             end                 module name
fffff880`04f68000 fffff880`04fc8000   iusb3hub T (no symbols)           
    Loaded symbol image file: iusb3hub.sys
    Image path: \SystemRoot\system32\DRIVERS\iusb3hub.sys
    Image name: iusb3hub.sys
    Timestamp:        Wed Feb 12 11:04:30 2014 (52FB553E)
    CheckSum:         0005CEC1
    ImageSize:        00060000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Check the Intel Download Center to see if there is an updated version.

You Intel USB 3.0 eXtensible Host Controller driver has also been flagged.

Code:
fffff880`09383328  fffff880`05050493Unable to load image \SystemRoot\system32\DRIVERS\iusb3xhc.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iusb3xhc.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys
 iusb3xhc+0x50493

0: kd> lmvm iusb3xhc
start             end                 module name
fffff880`05000000 fffff880`050c5000   iusb3xhc T (no symbols)           
    Loaded symbol image file: iusb3xhc.sys
    Image path: \SystemRoot\system32\DRIVERS\iusb3xhc.sys
    Image name: iusb3xhc.sys
    Timestamp:        Wed Feb 12 11:04:33 2014 (52FB5541)
    CheckSum:         000C82CE
    ImageSize:        000C5000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Again, the Intel Download Center may have an updated version. Let us know how you get on searching for updated drivers and we'll go from there.
My System SpecsSystem Spec
05 Oct 2014   #5
timeless

Windows 7 Professional (64bit)
 
 

l was wondering if it would be... the thing is lm using the latest driver already which is from the gigabyte website.

its version is 3.0.0.16 (which to my knowledge is newer than the ones on the intel website), as for the intel website lve ran the detection wizard and it didnt pick up updated drivers for the usb (then again l didnt see them listed when l ran the detection wizard which is strange considering it picked up other hardware like my old wireless adapter).

GIGABYTE - Motherboard - Socket 1150 - GA-Z87-D3HP (rev. 1.x) (see the x64 page for the driver l have installed).

suffice to say lm using a driver provided by my motherboard manufacturer, the ones you have linked me to are generic drivers l guess? ld contemplate using them but l guess l would have to uninstall Gigabytes USB Blocker since ld assume that some of its dependencies would rely on Gigabytes own drivers, and then there is the matter of choosing the right ones (which lm not too sure about), however ld been trying to find out where ld look to see if the above issue was fixed if l do change drivers.
My System SpecsSystem Spec
05 Oct 2014   #6
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

What I'd do in that situation is uninstall the eXtensible Host Controller, reboot and let Windows find the driver for it.
My System SpecsSystem Spec
05 Oct 2014   #7
timeless

Windows 7 Professional (64bit)
 
 

if l had not had ps2 keyboard lmao, l wouldnt have been able to do it XD realised after removing and deleting drivers that l couldnt do anything.

regardless ended up wasting a DVD to burn the drivers to, let windows search through the ones on disk l downloaded from intel (rather than gigabyte which ld been using which were the latest posted), lm now using the generic intel ones.

suffice to say is there any way to see if the new drivers are flagged without waiting for a bsod? ld been curious about it for a little while.
My System SpecsSystem Spec
05 Oct 2014   #8
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

I uninstalled my eXtensible Host Controller in the past and after rebooting and waiting a while I could use my keyboard and mouse again after Windows found the drivers. The panic does set in for a while though.

There's no real way to see if the drivers are stable other than through performance and lack of BSODs unfortunately. Let us know how you go along and we'll be here to support you through it.
My System SpecsSystem Spec
05 Oct 2014   #9
timeless

Windows 7 Professional (64bit)
 
 

kinda annoying, if l get another one l'll post a message tho tbh pulling my wireless from the usb seemed to cause my last one.. but ld rather not go looking for bsods

as for drivers, windows didnt find them.. then again l guess you meant windows update? which wouldnt have happened since l dont connect via lan so had to resort to a ps2 keyboard, my usual setup is both usb mouse/keyboard but with drivers removed l had to reset the comp to get any kinda input, just glad l know enough to get around a computer with a keyboard and no mouse .
My System SpecsSystem Spec
05 Oct 2014   #10
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Quote   Quote: Originally Posted by timeless View Post
as for drivers, windows didnt find them.. then again l guess you meant windows update?
Yeah, apologies for that. I suppose that's a lesson learned for me that not everybody is connected to the net via LAN, I won't take that for granted in future!
My System SpecsSystem Spec
Reply

 ugh, BSOD after removing device




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when removing USB serial adapter
Hi, I was using SecureCRT with USB Serial adapter (Keyspan USA19H), then I removed the adapter with session active in SecureCRT app and the notebook crashed. This happened a couple of times. Please, help fix this issue. Thanks. Rodrigo
BSOD Help and Support
BSOD after removing Alureon.a
I'm currently unable to access the computer that has the issue but I was haivng some blue screen stop error issues and went to the blue screen forum for help. I had removed my old norton 360 to get Microsoft security essentials and malware bytes. The MSE initial scan found the alureon trojan on my...
System Security
Removing a media device from network.
Hi everyone. I'm having a small problem and I'm not sure where to go from here. I currently have a network set up with my computer, my girlfriend's computer and my Samsung TV on it. My computer is named "Chris". When I look in my network folder I see media devices set up. The first one is "Chris",...
Media Center
After Removing stdriver64.sys No Audio Output Device Installed
I was instructed to remove the stdriver64.sys from my system as it was causing crashes. Well after I've done so the audio device refuses to work I have attempted to uninstall and reinstall my Realktek High Definition device a few times, but it still refuses to work. I have to system restore to get...
Sound & Audio
BSOD Every Boot After Removing Malware
My wife had some malware on her pc today and after removing it with Malwarebytes all the system wants to do now is BSOD typically with a 0x00000007e but has also done a 0x00000007a and a 0x00000096. She can load up into safe mode w/ networking just fine. It wont allow her to do a system restore. ...
BSOD Help and Support
Removing old device drivers - nice cleanup or dangerous
Hey people! I'm sure most of you know of the "devmgr_show_nonpresent_device" variable to show inactive (disconnected etc) devices in device manager. A common old practice is to look around here occasionally and clean everything out that you don't connect or use anymore to tidy things up. ...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App