Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, a clock interrupt was not received

08 Oct 2014   #11
HonorGamer

Windows 8.1 Pro x64
 
 

Sounds good,

Hopefully we figured out the cause.

-Justin


My System SpecsSystem Spec
.
09 Oct 2014   #12
shanester366

Windows 7 Professional
 
 

Guess not, had a few freezes then finally got another Blue screen, diff code though :\
My System SpecsSystem Spec
10 Oct 2014   #13
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

shanester366, if I may I would like to interject something here. I have looked at the last 2 BSOD posting files you have uploaded and what I have found is a little confusing. Every one had the same bug code, 101, but the results were a few different things. The one you uploaded 2 days ago listed this. But the last 5 dump files listed it twice, making 3 of the 6 dumps listing the same thing.

Code:
 aswSnx
start             end                 module name
fffff880`03e43000 fffff880`03f45000   aswSnx   T (no symbols)           
    Loaded symbol image file: aswSnx.sys
    Image path: \SystemRoot\system32\drivers\aswSnx.sys
    Image name: aswSnx.sys
    Timestamp:        Thu Jun 26 06:34:44 2014 (53AC0554)
    CheckSum:         0010D6F6
    ImageSize:        00102000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Avast Virtualization Driver

Also listed once was

Code:
 Rt64win7
start             end                 module name
fffff880`11000000 fffff880`110e8000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Tue Jul 15 21:50:41 2014 (53C5E881)
    CheckSum:         000EE582
    ImageSize:        000E8000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Which is your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC

Also listed twice was your Graphics driver.

Code:
 nvlddmkm
start             end                 module name
fffff880`11061000 fffff880`11d35000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Sat Sep 13 14:59:50 2014 (5414A236)
    CheckSum:         00C8E3A6
    ImageSize:        00CD4000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Some of the listed drivers, I see nothing wrong with, which, to me, means one of 2 things. Either the drivers are corrupted, which can happen with BSODs or you have another underlying problem. To try to determine which it is, I am going to ask you to do several things for me.

At least temporarily, please uninstall Avast using the uninstall utility ( avast! Uninstall Utility | Download aswClear for avast! Removal ) and replace it with Microsoft security Essentials ( Microsoft Security Essentials - Microsoft Windows )

Please reinstall your Realtek Lan driver from your Motherboard's web site. Use the latest version they offer.

Please reinstall your Graphics driver, using this procedure to try and get as clean an install as possible
NVIDIA Drivers - Avoid Problems

Next please open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

I would like you to check and make sure you are running the latest firmware for your SSD.

I would like you to go into BIOS and look and see what your SATA controller is set to ( IDE, AHCI or Raid) and just remember that.

Also, check your bios and make sure your ram timings, frequency and voltage is set to the manufacturer's specs and make not of how it is set up.

I would like you to next set your BIOS to optimized defaults. then make sure your SATA Controller is set to the same setting it is right now, then set your Ram frequency, timings and voltage to the manufacturer's specs, set your Boot options, for now, to your CD/DVD drive as 1st boot device and your hard drive as 2ND boot device, then save and exit.

Run that way for a while and see if there is any improvement. If you have a BSOD, upload the
Blue Screen of Death (BSOD) Posting Instructions again.
My System SpecsSystem Spec
.

10 Oct 2014   #14
shanester366

Windows 7 Professional
 
 

Alright, did all you said, the SSD firmware was a little out of date so its now updated, the scan found no issues. One note tho, when I set specs to default on mobo, when I hit save and exit, before I hit confirm the computer just shut off for about 4 seconds then turned back on. I did it again but now one of the case fans is on full blast. Not sure if that means anything but I figured I would mention it. We shall see how it goes from here. *crosses fingers*
My System SpecsSystem Spec
10 Oct 2014   #15
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Ok, you can set a fan profile if you like. That, I'm sure, should not have any affect on the computer running other than heat. As far as it shutting down then restarting, that is common, at least for mine. Any time you change voltages, ram timings or things that are significant, the computer has to shut down to set the new values. It should not do that any more. Here's hoping it helps you.
My System SpecsSystem Spec
10 Oct 2014   #16
shanester366

Windows 7 Professional
 
 

well the fan slowed down after about 5 min of use, normally it was laggy and often crashing if i opened more than 3 tabs with multi media, but I just ran a video game and 7 youtube videos and it was running pretty smoothe and not getting nearly as hot, so Im hoping this fixed it
My System SpecsSystem Spec
10 Oct 2014   #17
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Let's hope so, but give it a little time to be sure. Please give us updates as to how things are progressing. Good luck.
My System SpecsSystem Spec
14 Oct 2014   #18
shanester366

Windows 7 Professional
 
 

Quick update, seems to be working fine now, had no issues, HUUGGEE thanks for all the help guys! I really appreciate it
My System SpecsSystem Spec
14 Oct 2014   #19
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You're quite welcome. We are glad we were able to help you, but you did all of the work, so congratulations to you. If you have any further problems, we'll be right here.
My System SpecsSystem Spec
Reply

 BSOD, a clock interrupt was not received




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD - a clock interrupt was not received on a secondary processor
BSOD only while transcoding video. It's happened for a while as you can see in the log files. The earlier ones are from creating a video with cyberlink power director and all the ones from 11/27 and 11/28 are using handbreak transcoding DVD rips. I can't recall this computer ever BSOD while...
BSOD Help and Support
BSOD, a clock interrupt was not received
on a secondary interrupt. I had this problem before, but was solved with changing power settings. But since the last update of tuesday from Windows, the problem reoccurs. I tried to change the power settings, but the problem persists. Can anyone help. Thanks in advance
BSOD Help and Support
BSOD : Clock Interrupt Not received/Driver_IRQL_Not_Less_or_Equal
Hello People. First off, I'm sorry if this is a potential duplicate post of someone else's thread. I looked through but got relatively confused. So i figured i would create an account and upload my data via the SF Diagnostic Tool. To state my problem: I built my computer about two years...
BSOD Help and Support
BSOD - A clock interrupt was not received on a secondary.....
Hi guys, First of all, thanks for reading this. I switched my computer on 3 days a go and encountered the above BSOD. It happens as soon as I sign in or when I open a web browser. Previously I had no known issues with the computer and made no changes to cause this problem, no added hardware...
BSOD Help and Support
BSOD - BCCode:101 A clock interrupt was not received on a secondary...
Delete.
BSOD Help and Support
BSOD - Clock interrupt not received on secondary processor
I have had a fairly stable system until I decided to leverage 8gb of ram and 64bit through Windows 7. Now daily or more I get greeted with this consistent error that from reading in the various help sites could be one of a million things. I have tried: cleaning extensively with Spybot seek and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App