Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD while loading games whea uncontrollable error

08 Oct 2014   #1
amanda1986

windows 7 ultimate 32bit
 
 
BSOD while loading games whea uncontrollable error

hi recently built my pc from scratch and everytime i try to load a game up i get a BSOD or my computer turns off randomly i have tryed evrything like checking my temps,did a memtest got no errors ,raised the volts to 133 and even reinstalled windows a few times but it still gets BSOD any help would be appreciated i have attached my mini dmp files to this thread


My System SpecsSystem Spec
.
08 Oct 2014   #2
HonorGamer

Windows 8.1 Pro x64
 
 

Hello,

Code:
Windows 7 Kernel Version 7600 MP (6 procs) Free x86 compatible 
Missing Windows 7 Service Pack 1
Having SP1 is very vital to make sure that windows is running smoothly the way it is supposed to run. Either download through Windows Update, or download here: Download Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) from Official Microsoft Download Center

This could actually be the very well cause of the BSODs.

Although, after looking through the crash files, i found:
Code:
BugCheck 124, {0, 86662324, 0, 0} 
BugCheck Info: WHEA_UNCORRECTABLE_ERROR (124)
Bugcheck 124 is a hardware error. Basically mean that either your hardware is incompatible or is not functioning properly. Do the following below:

Quote:
BugCheck 0x124
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.

warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Remember to read closely through Stop 0x124 - what it means and what to try for the crash.
Coutesy of: writhziden
Post back results once done.

-Justin
My System SpecsSystem Spec
Reply

 BSOD while loading games whea uncontrollable error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODs when playing games in general, especially BF4 (WHEA 19)
Hi there So for some months now my PC's getting some random crashes when playing any type of 3d game, and when playing Battlefield 4 in particular, these crashes turn into BSODs, each one with a different related system file, as seen in the logs. The most common crashes result only in a sudden...
BSOD Help and Support
BSOD 116-117 When Loading Games
Hi All, I seem to be experiencing BSOD as soon as I load games, in this case World of Warcraft. My computer will restart once or twice then generally work as normal which is quite strange. I have downloaded BlueScreenViewer to try and find more information and it's telling me the below: ...
BSOD Help and Support
BSOD, WHEA error
Hello. I would like to request your help in addressing a BSOD caused by WHEA error. My computer had been stable for a long time (no prime95, memtest, etc. errors either), before the sudden onslaught of BSODs. The computer will barely keep running for one hour before crashing. I canít figure...
BSOD Help and Support
BSOD when loading games
Hi, I need help here. My pc have been getting bluescreen when i loading the games. it didnt happen before. it happen just after i remove all the components from the case because i make some new painting on my case. after painting is done, i reinstall all the components, turn it on and it works...
BSOD Help and Support
Uncontrollable hardware error. Straight after building
Hi since my computer just blue screened again I'm posting this on my phone. As the title says I'm getting hardware errors after litterally finishing the build and installing windows. I will post the dumps tomorrow since its 00:30 already here. Thanks
BSOD Help and Support
BSOD At random times - WHEA Error
My Windows 7 Is. . . - x64 - I built the system myself, installed from the Windows 7 DVD - Full Retail Version - What is the age of system (hardware)? The age of my system is very new. Phenom II X3 720 Black Edition CPU running OC'd at 3.6 GHz. (Ran the Prime95 stress test for a few hours...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 16:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App