BSOD playing Age of Empires II HD, files attached

Page 3 of 4 FirstFirst 1234 LastLast

  1. Posts : 35
    Windows 7 Home Premium 64-bit
    Thread Starter
       #21

    Golden said:
    Arc has been ill, I'll see if I can help. Re-run IBT, but this time post a screen capture showing the failure and also the temperatures please.
    Here you go :)
    Last edited by derekimo; 13 Dec 2014 at 03:19. Reason: Attached picture
      My Computer


  2. Posts : 35
    Windows 7 Home Premium 64-bit
    Thread Starter
       #22

    I just had another BSOD, and when trying to start up AOE 2 HD, I get this message, as attached.
    Last edited by derekimo; 13 Dec 2014 at 03:20. Reason: Attached picture
      My Computer


  3. Posts : 35
    Windows 7 Home Premium 64-bit
    Thread Starter
       #23

    Bump (not impatient, understand I'm not the only one)
      My Computer


  4. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #24

    The IBT result is self-explanatory I think.....reset amy overcloks, then re-apply fresh thermal paste again.
      My Computer


  5. Posts : 17,322
    Win 10 Pro x64
       #25

    I fixed those pictures above for you, it's a lot quicker to use this method,

    Screenshots and Files - Upload and Post in Seven Forums

    A lot easier on others trying to help as well if they don't have to download something that could be easily seen in the post.

    Just a little tip that goes a long way. :)
      My Computer


  6. Posts : 35
    Windows 7 Home Premium 64-bit
    Thread Starter
       #26

    @derekimo thank you!

    @golden I haven't over clocked anything,but to be safe how can I completely reset to defaults? I thought my cpu temp was fine as well so why should I apply thermal paste?I have a fan that's meant for 8 core fx series also. Cheers
      My Computer


  7. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #27

    IBT shows your CPU isn't stable under load, therefore its either a cooling issue, or a fault in the CPU.

    Re-run IBT again, but use HWInfo to show the temperatures (its more reliable than Speccy), as explained here:
    CPU - Stress Test Using IntelBurnTest

    Provide screen capture images.
      My Computer


  8. Posts : 35
    Windows 7 Home Premium 64-bit
    Thread Starter
       #28

    Golden said:
    IBT shows your CPU isn't stable under load, therefore its either a cooling issue, or a fault in the CPU.

    Re-run IBT again, but use HWInfo to show the temperatures (its more reliable than Speccy), as explained here:
    CPU - Stress Test Using IntelBurnTest

    Provide screen capture images.
    Idle temperature was around 19.0c:
    Attachment 343111

    Temperature during standard test did not exceed 56.4c and CPU passed the test:
    Attachment 343112

    Temperature during high test did not exceed 56.4c again and CPU passed the test:
    Attachment 343110

    Temperature during very high test did not exceed 56.4c again and CPU failed the test:
    Attachment 343113

    So my temperatures are fine right? But do you think the CPU is causing the BSODs and I need a new CPU?
      My Computer


  9. Posts : 35
    Windows 7 Home Premium 64-bit
    Thread Starter
       #29

    bump
      My Computer


  10. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #30

    Please be patient - we have shitloads of BSOD threads to tackle. Bumping will have the opposite effect of what you intend.

    Whilst your CPU temperatures are low during the test, the fact the IBT fails is a significant issue. If it was me, I would replace it.
      My Computer


 
Page 3 of 4 FirstFirst 1234 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:54.
Find Us