Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD every 10min

22 Oct 2014   #1
Funda

Windows 7 SP1 64-bit
 
 
BSOD every 10min

Just built this pc yesterday and i've been getting BSOD every 10 minutes, I don't know what's causing it. All my hardware seems to be working.


My System SpecsSystem Spec
.
22 Oct 2014   #2
HonorGamer

Windows 8.1 Pro x64
 
 

Hello,

Please follow the Blue Screen of Death (BSOD) Posting Instructions so we can get all the files needed to assist you.

-Justin
My System SpecsSystem Spec
22 Oct 2014   #3
Funda

Windows 7 SP1 64-bit
 
 

Will do, ill get back to you
My System SpecsSystem Spec
.

23 Oct 2014   #4
Funda

Windows 7 SP1 64-bit
 
 

I ran the DM Log, this is the folder it gave me.
My System SpecsSystem Spec
23 Oct 2014   #5
HonorGamer

Windows 8.1 Pro x64
 
 

Hello,

You say you've been getting a BSOD every 10 min, but there is only 1 dump file in there. Which means either the others didn't generate one, or the computer isn't getting them every 10 minutes.

It is blaming hardware. Even though all the hardware is running, it could be incompatible, or faulty. So lets try running some test

Quote:
BugCheck 0x124
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.

warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Remember to read closely through Stop 0x124 - what it means and what to try for the crash.
Coutesy of: writhziden
Post back results.

-Justin
My System SpecsSystem Spec
23 Oct 2014   #6
Funda

Windows 7 SP1 64-bit
 
 

I wouldnt be able to do any tests because it just crashed, honestly close to every 10min. I used this other program called "who crashed". I can't even do windows updates because it crashed before it can finish. -_-
Im pretty positive that all the components in the pc are all compatible.
My System SpecsSystem Spec
23 Oct 2014   #7
HonorGamer

Windows 8.1 Pro x64
 
 

Have you tried safe mode?

Specifically describe what's happening. Is it a BSOD, or turn off and on?
My System SpecsSystem Spec
23 Oct 2014   #8
Funda

Windows 7 SP1 64-bit
 
 

What do I do in safe mode? Yes it's a BSOD, I took a picture and posted it up above. After the BSOD I just restart the computer.
My System SpecsSystem Spec
Reply

 BSOD every 10min




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD can play games for 5-10min before crashing
Got a custom pc few weeks old. tryed the recommended drivers, beta and now trying some older drivers but keep getting crashes. Also when I turn my pc on the first time everyday It gets stuck on a blackscreen or BSOD immediately and after a restart I get back to windows. I really donít know what to...
BSOD Help and Support
BSOD when on computer between 2min to 10min
This has been occurring only a couple of days ago and I don't know what is causing it. Apparently ntoskrnl.exe+75c40 is something to do with intel driver but have reinstalled intel and ati drivers. I also checked ram and hard disk for errors which have come clean so i don't know what else i can do...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App