Issue not able to repair Computer through sfc checker

Hi

I am using Windows 7 SP1 with the latest patches.

I ran the sfc checker today - sfc /scannow as I do to check on my machine and it found issues that it was not able to repair/fix some issues through the sfc checker.

I was able to copy the cbs.log file from windows/log/cbs.log to my desktop and I saw that the following issues were not able to be repaired. I have added the cbs.log file to report for further assistance.

Below is the line from the report

Anyhelp would be appreciate to fix this issue

Thanks
Flybird

2014-10-30 08:43:32, Info CSI 000003a7 [SR] Cannot repair member file [l:36{18}]"InstallUtilLib.dll" of NetFx-INSTALLUTILLIB_DLL, Version = 6.1.7601.18523, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-30 08:43:33, Info CSI 000003a8 Hashes for file member \SystemRoot\WinSxS\x86_netfx-installutillib_dll_b03f5f7f11d50a3a_6.1.7601.18523_none_8b13dcce9524a6e5\In stallUtilLib.dll do not match actual file [l:36{18}]"InstallUtilLib.dll" :
Found: {l:20 b:1R7OgGTmx4hlrYg/XeXzoAHnuPo=} Expected: {l:20 b:isSQ/1riWwG52k4+vs8ptwSBKoM=}
Found: {l:32 b:l3XmdjQmKZBCkubIOZOf5yecK74E/LjMYC5BcfPrnqk=} Expected: {l:32 b:MfcSwgcKWFEvVTmTkIm+0Cx1k0qYP1GooxSOJova8l4=}
2014-10-30 08:43:33, Info CSI 000003a9 [SR] Cannot repair member file [l:36{18}]"InstallUtilLib.dll" of NetFx-INSTALLUTILLIB_DLL, Version = 6.1.7601.18523, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-30 08:43:33, Info CSI 000003aa [SR] This component was referenced by [l:158{79}]"Package_4_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.2937610-417_neutral_GDR"
2014-10-30 08:43:33, Info CSI 000003ab Hashes for file member \??\C:\Windows\Microsoft.NET\Framework\v2.0.50727\InstallUtilLib.dll do not match actual file [l:36{18}]"InstallUtilLib.dll" :
Found: {l:20 b:1R7OgGTmx4hlrYg/XeXzoAHnuPo=} Expected: {l:20 b:isSQ/1riWwG52k4+vs8ptwSBKoM=}
Found: {l:32 b:l3XmdjQmKZBCkubIOZOf5yecK74E/LjMYC5BcfPrnqk=} Expected: {l:32 b:MfcSwgcKWFEvVTmTkIm+0Cx1k0qYP1GooxSOJova8l4=}
2014-10-30 08:43:33, Info CSI 000003ac Hashes for file member \SystemRoot\WinSxS\x86_netfx-installutillib_dll_b03f5f7f11d50a3a_6.1.7601.18523_none_8b13dcce9524a6e5\In stallUtilLib.dll do not match actual file [l:36{18}]"InstallUtilLib.dll" :
Found: {l:20 b:1R7OgGTmx4hlrYg/XeXzoAHnuPo=} Expected: {l:20 b:isSQ/1riWwG52k4+vs8ptwSBKoM=}
Found: {l:32 b:l3XmdjQmKZBCkubIOZOf5yecK74E/LjMYC5BcfPrnqk=} Expected: {l:32 b:MfcSwgcKWFEvVTmTkIm+0Cx1k0qYP1GooxSOJova8l4=}
2014-10-30 08:43:33, Info CSI 000003ad [SR] Could not reproject corrupted file [ml:520{260},l:98{49}]"\??\C:\Windows\Microsoft.NET\Framework\v2.0.50727"\[l:36{18}]"InstallUtilLib.dll"; source file in store is also corrupted
2014-10-30 08:43:33, Info CSI 000003ae Repair results created:

I am still having an issue with this

I have found out why the sfc is telling me that the files are not able to be repaired since I installed an update Windows6.1-KB2937610-x64 that does not work well with sfc. When I uninstalled the update, I was told by Sfc that the windows did not find any file integrity issues.

I have uninstalled KB2937610-x64 from the machine.

I will report this issue to Microsoft

You didnt get any reactions ether on your help request. A lot of readers but no one helping here
I had the same with my problem, more then 300 readers where from i suppose who got the same problem.

Is this forum still active or just a question collector?

Post this thread in the Windows Updates and Activation sub-forum. There you can find ways to fix Windows updates errors.

This issue is now fixed by Microsoft. I need to do a offline checker for the system following these instructions from Microsoft.

Select Start, All Programs, Accessories, right click Command Prompt, and click Run as administrator from the drop down menu.. Type cd\ and press ENTER. Type "chkdsk c: /r" without the quotes and hit ENTER. Make sure you include the spaces indicated. Enter Y when asked whether you wish to run chkdsk on restarting the computer. Type exit, press the ENTER key and restart the computer.



It corrected the files that were causing the patch not to install properly

I then did a sfc which told me that there are no integrity issues and then installed the KB patch.

Everything is working properly :)