Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BlueScreen Error

02 Nov 2014   #1
Ghosy

windows 7 64-bit
 
 
BlueScreen Error

Hello guys,
I have windows 7 64-bit version from past few days my PC is expiring some problem which is blue screen error and i have done everything to solve it like updating my driver from consent website(GA) and even my Graphic card drivers are up to date (344 version). I am attaching the Dump file with it. Even tried one of your page for result (BSOD BCCODE:1e Locale ID:1033), Still the same..


My System SpecsSystem Spec
.
02 Nov 2014   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome Ghosy mate I cannot see anything blindingly obvious in the dump files so can you run Speccy http://www.piriform.com/speccy/download and post back the machine temps? and for starters read this and if you can follow it through. It is testing the PSU voltage rails and we need to make sure the unit is not failing as it very often overlooked as a cause of these problems.


UsingHW Info PSU

Download HW Info and pick the right bit version -
HWiNFO, HWiNFO32/64 -Download - (or copy andpaste this site into the search bar) If you do not need the running informationin the smaller right hand panel close it. In the left hand window click on the+ for the individual device groupings and they will open out to the variouscomponents.

Go on opening out further until you get to the device itself. Click on it and itwill highlight. In the right hand window there will be a very detailed descriptionof that device as in brand, speeds model number etc etc These are very detailedand are just what is needed for searching for drivers etc.

To get the PSU volts you need to select the Sensor button circled in yellow inthe pic for PSU testing do the same and scroll down the readout as in my pic towhere it has Nuvoton = yours might be a different section name / title. Postback a pic of that please.

If you want a more definitive test see this
http://www.sevenforums.com/tutorials/301799-psu-test-dc-output-voltage.html
but pleaseonly use a digital multimeter and not an analogue as they inject typically 9vinto a circuit to test and into a 3.3v or 5v rail - not a good idea!!see thepartial pic of the correct sort of meter in that tutorial. details if youscroll down that listing.

Now a good reference article is this
Voltage Rails - Power Supply 101: AReference Of Specifications it will explain in detail what thevoltages are and functions of the PSU


In my pic is my Ivy Bridge readings and that section might be titled differently in your set up - mine is Nuvoton.
Another area we might have to look into is the RAM and for that you will need to run this and it is time consuming



MEMTEST

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html this one you will need to make abootable disk set the BIOS to optical(or USB if preferred) boot the machine and let it run for at LEAST 8 passes unless the errors come up straight away. Takesfair time to complete and some leave itrunning overnight.

NB

When you run the memtest ifthe errors come up straight away a in my pic then you will need to test each stick if you havemore than one and if it is only onethen test again in another slot because it could also be a fault on the board.

So for example two slots A & B /sticks 1 & 2 if the errors come up remove all sticks

Then try stick 1 in slot A if noerrors install stick 1 in slot B if no errors then install tick 2 inslot A if no errors then install stick 2in slot B. If there were errors to start with one of these combinations willhave to show errors.

Doing this will narrow down the problemslot as it could be the slot and not the stick or even a specific slot andstick combination. A lengthy process but only necessary if you get errors.




My System SpecsSystem Spec
02 Nov 2014   #3
Ghosy

windows 7 64-bit
 
 

My cpu average temperature was 39-45 C , graphic card's temp was constantly at 39 C and Storage temp was 37 C.
Ram usage was 67 %
My System SpecsSystem Spec
.

02 Nov 2014   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hmm might be time for a memtest on that RAM which is a tad on the low side for running a 64bit system any chance of getting it up to 4GB?
My System SpecsSystem Spec
03 Nov 2014   #5
Ghosy

windows 7 64-bit
 
 

i'm not sure of that anything else we can do apart from changing Ram and OS to 32 bit..
My System SpecsSystem Spec
03 Nov 2014   #6
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Change the RAM would be the go Ghosy I know it is more expense but 32bit is a retrograde step mate and the OS will cost more than the RAM in all likelihood.
My System SpecsSystem Spec
Reply

 BlueScreen Error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
bluescreen error.... :'( please help
so i was just browsing the net..like always and out of nowhere...i got a bluescreen and the computer restarted and when it came back...the screen said windows has recovered from an unexpected error....details are as follows... Problem signature: Problem Event Name: BlueScreen OS...
BSOD Help and Support
Help with BlueScreen error
Hello, Sorry for another question in so few days. I have a computer which is occasionally suffering from bluescreen errors. They appear to be random. I've never been present for one, though. I only see the evidence. My question is how to I go about solving them? The 'windows recovered from an...
BSOD Help and Support
Bluescreen error:s:s
UPLOAD.EE - Download SF_29-04-2013.rar HELP PLZ
BSOD Help and Support
Help, Please! Bluescreen error
Hi, I started receiving a bluescreen error a couple of months ago as it only happened a few times I ignore it. It is now becoming more frequent and I don't know what to do. Any help is greatly appreciated!!! I am running Windows 7 Professional 32 bit for about 6 months now. The computer...
BSOD Help and Support
BlueScreen error
My system automatically restarts with BlueScreen error. It has occurred twice when I tried to install Photoshop CS5 Extended. It goes fine until about 50% installation, and then that blue screen appears, and afterwards it gives that message saying system recovered from an unexpected shut-down. I...
BSOD Help and Support
BlueScreen error
Hello there, Please help me to quote this error: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 1000007e
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App