Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x116 atikmpag.sys : abit ip35 pro doesn't like R7 260X graphics card

04 Nov 2014   #1
obvious

7 x64 Ultimate
 
 
0x116 atikmpag.sys : abit ip35 pro doesn't like R7 260X graphics card

I'm troubleshooting a potential motherboard/GPU compatibility issue.

Abit IP35 Pro - Latest BIOS 18
New graphics card - Sapphire R7 260X 2GB
Windows 7 X64 SP1

The system was running fine. I bought a new graphics card, uninstalled all graphics drivers and deleted them, powered off, installed new card then powered on and I get BSOD stop 0x00000116 atikmpag.sys

I even tried a fresh Windows 7 x64 sp1 install from USB stick. POST displays ok but then as soon as windows install changes the graphics mode it goes to black screen and stays there.

The new graphics card works in another machine. I've swapped out power supply and ram with the same results. No overclocking. System is stable with existing PCI-E graphics.

As I'm on the latest BIOS (which I've cleared/reset after flashing) and I cant even get any display output during windows install I'm guessing it's just not going to work.

..but I'm interested to know what the attached dump tells us, just in case there's any hope of getting this setup to work.

Cheers


My System SpecsSystem Spec
.
04 Nov 2014   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

hello, obvious and welcome to the Forums. As far as your question, both dump files list the graphics drivers and a failure to recover.
Code:
atikmpag
start             end                 module name
fffff880`0495b000 fffff880`049ed000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Mon Sep 15 16:59:06 2014 (5417612A)
    CheckSum:         000964D0
    ImageSize:        00092000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800707a010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff88004966038, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000002, Optional internal context dependent data.
When you say you uninstalled the previous drivers, are you sure you got all of them? You must have had some display when booting into Windows in order to install the graphics driver, or perhaps I'm a little slow. Also, am I correct that you have a 380W Power supply? From what I am finding it is recommended to have a 500W minimum and preferably a 600W PSU. Although from what I find on the power draw of your card, I think the 600W is a little high. But, according to the dump files, what is happening is the drivers are crashing and not recovering within the allotted time for windows.

I might suggest you try reinstalling the graphics drivers, if you can get a display as follows.

I am going to give you some links that will help you get a good clean install and not have any drivers you don't need that will conflict with other drivers. Download a WHQL driver from Latest AMD Catalyst Video Driver for Windows 7 . Once you have them downloaded, uninstall you current driver from control panel. next clean up any left over drivers from following this tutorial Drivers - Clean Left over Files after Uninstalling and select only ATI Display Drivers. After you have done that and rebooted, install the new driver, only select custom install and install only what you have to. Very few people need most of what they include. You do not need the audio/HDMI drivers as you already have that in your Motherboard drivers. Unless there is some reason you need them, the only thing you really need is the Display Driver.
My System SpecsSystem Spec
04 Nov 2014   #3
obvious

7 x64 Ultimate
 
 

Thanks essenbe

To clarify, my first attempt at upgrading the graphics card involved uninstalling AMD display drivers/catalyst manager etc and doing another uninstall from device manager until I got back to standard vga adapter. After that I powered down and installed the new graphics card. System simply black screens (while seeming to load/run in background) after getting past POST. Stays like that indefinitely.

If I then put the original graphics card back in + re-install appropriate drivers the system is back to how it was and working ok. If I then power down and insert the new graphics card I get the BSOD as per first post, so yes, drivers are installed at that point.

The power supply is a new coolermaster 500W and I also tried a 700W supply.

The thing that bothers me the most is that when I attempt a fresh windows install from USB stick with the new graphics card installed it goes to black screen (monitor signal light remains on) and stays there while the Windows installation loads files. The screen then stays black indefinitely. If I force a reset after eg an hour then I sometimes get the BSOD as per the first post.

Thanks for signposting me to DDU. With old graphics card + drivers installed I uninstall drivers then run DDU from safe mode choosing the "shut down when done" option. I install the new graphics card and power up (I'm using additional 4pin power to the card and the fan spins up). System posts fine. Goes to verifying DMI data pool then just as the resolution changes to display "starting windows" the screen goes dark and stays that way. Windows continues to load and idles. Screen remains dark but the power/signal indicator is green. Eventually power saving cuts in and monitor turns off. Pressing any key wakes monitor but screen remains dark.
My System SpecsSystem Spec
.

04 Nov 2014   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You said earlier that you had tried it in another computer and it ran fine. Were you using the same type cable and connection to the monitor as you are now? I'm sort of out of ideas, so I may be asking some elementary questions. But, is your monitor set for the type of signal you are sending it (HDMI, DVI) Have you tried another pcie slot on the board? There is very little involved in a Graphics card. The driver, the card, the PSU and the board. The drivers don't load until the operating system begins to load. Not until you see the starting Windows do any drivers load, If I am understanding you correctly, when you see starting Windows, is when your monitor goes black. Are you sure you have the correct drivers loaded for the card? I would make sure of that, try another slot and another cable with a different connection. I honestly don't know of anything else to try. But, it would help if you would update your system specs. We may see something there that throws up a red flag. As far as system specs, these are the instructions I usually give. Model and Manufacturer help as sometimes we need to look up a particular component, just like I tried looking up the PSU you have listed, which is obviously the wrong one. And the also need to be in the bottom left corner un
Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs
der system specs.
My System SpecsSystem Spec
05 Nov 2014   #5
obvious

7 x64 Ultimate
 
 

I tested the new card using he same DVI cable and monitor in another PC. I ran a partial windows install on it right up to the language/region selection screen and decided that was enough to show it was working.

The monitor displays a little dvi icon briefly when it detects a dvi signal. No other sources were connected.

I used ATI/AMD catalyst 14-9 which seem appropriate, either just the drivers or the complete install. The other older card (HD 5450) also runs on these drivers.

The Abit IP35 Pro motherboard has two x16 PCI-E slots. I've tried in both. Same results.

It's a bit of a head scratcher. Both systems are self build. I forgot sevenforums has systemspecs in the user profile. Neither of the systems I've mentioned are mine. One is my GF's son's (He wants more FPS, naturally) and the other is a neigbours.

I'll put my own system specs in anyway but for the record the problem system is An Abit IP35 Pro, Intel E6600, 700W psu, 3*1GB ddr2, cdrom and 500GB sata hard drive. Pretty simple setup.

I've even toyed with swapping the motherboards if I could get the go ahead. I've dropped a new motherboard into an existing windows install before and it's a bit of a lottery as to whether it works. The approach I've taken before is to (this will make you wince) delete pretty much everything in device manager then shut down, install new motherboard and restart!?! Windows activation issues aside, this has worked before lol.
My System SpecsSystem Spec
05 Nov 2014   #6
obvious

7 x64 Ultimate
 
 

My System SpecsSystem Spec
05 Nov 2014   #7
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Well, I know people on this Forum who are running a 780 on a C2D board just fine. It won't get the performance it will on newer boards, but better performance than most anything else you can put in it. The last paragraph basically says it needs an update sometimes, but it does work.

Personally, I remain unconvinced. Your problem may be the Motherboard, but I don't think that's the problem with it. Just my 2 cents.
My System SpecsSystem Spec
Reply

 0x116 atikmpag.sys : abit ip35 pro doesn't like R7 260X graphics card




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODS playing any game or on youtube, error 0x116 atikmpag.sys
Hello world, I am experiencing an annoying BSOD, error 0x116 with the atikmpag,sys file suspected (took a photo of the screen, attached it here). At first, i only had them once per week, or less, only while playing big, demanding games (i.e. Skyrim, Star citizen) about a month ago. Now, they...
BSOD Help and Support
ABIT IP35-PRO Drivers Problems Windows 7 x64
System: ABIT IP35-PRO RADEAON HD5450 Video card - got latest original drivers for it and at testing everything looks OK Corsair Memory TWIN4X1024-6400C4 (2x1024 dual channel kits) CPU Intel Core 2 DUO E8400 3Ghz 600W 200$ power source, i am not at home now and i don't really remember it's...
Drivers
Got a new graphics card and now my second monitor doesn't work
Hey guys Mettalknight here I recently bought a new Graphics Card (A Powercolor HD7750 Pic) this graphics card has 1 HDMI 1 VGA and 1 DVI slot. My old graphics card had the same setup so I thought no problem I will just take my 2 vga monitors and since I already have a converter it will work no...
Graphic Cards
GRAPHICS_DRIVER_TDR_FAULT 0x116, constant atikmpag.sys BSODs
Hello Seven Forums, I'm ePeen and I hail from OCN. I have decided to come here as I know there are very many intelligent members here that can hopefully help me solve my issue. System Specs (NOTHING IS OVERCLOCKED, ALL AT STOCK): I am 100% at my wits end. I am frustrated because I JUST got...
BSOD Help and Support
BSOD 0x116 atikmpag.sys possibly video card problem?
Computer is a Sager P150 HM. Operating System MS Windows 7 Home Premium 32-bit SP1 CPU Intel Core i7 2630QM @ 2.00GHz 49 C Sandy Bridge 32nm Technology RAM 8.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24) Motherboard
BSOD Help and Support
a few questions about my ABIT IP35-PRO motherboard drivers
I am running Windows 7 Professional x64 Editionw/Service Pack 1 I have the latest and greatest beta bios from ABIT IP35 Pro Motherboard BIOS's Date Code 2010/07/05 File: 2010-07-05 IP35 Pro 18ZZZ.rar Release information: 1. BIOS modified by "Ligushka". 2. M629B18.ZZZ updated with: a. Phoenix...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App