Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when running multiple applications

08 Nov 2014   #1
rick19011

Wndows 7 64bit Ultimate
 
 
BSOD when running multiple applications

I have been getting BSOD a couple of times now and just had it again, it normally happens when running multiple applications and don't understand what the problem is.


My System SpecsSystem Spec
.
09 Nov 2014   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome to the forum.

Make sure your dump logging is enabled.
  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click System.
  3. Click the Advanced tab, and then click Settings under Startup and Recovery.
  4. Check Write an even to the system log, and Automatically restart.
  5. In the Write debugging information list, click Small memory dump (256k).

Location of Dumps:
C:\Windows\minidump

Uninstall Bit Defender and use MSE in its place.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other internet security software. Malwarebytes is a great combo to MSE. They are free and lightweight.

Also uninstall your existing Antivirus software before you install MSE.

Good and Free system security combination.

warning   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.



Perform a Clean boot:Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
  • Click on the
  • Type CMD on Search
  • Left click and Run as Administrator
  • Type SFC /scannow
Full tutorial here:
My System SpecsSystem Spec
Reply

 BSOD when running multiple applications




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on user PC after 3-5 minutes, no applications running
I have already debugged the dump file will paste info: 2: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis ...
BSOD Help and Support
BSOD running multiple applications, errors 0x000007A and 0x00000F4
Evening, I have had no problems with this PC until recently. The first time it happened today it stated a 0x000007A error and every other time has been a 0x00000F4 error. August 8th was the first time it started getting BSOD, which happens to be the last time a dump file was made. I have set it...
BSOD Help and Support
Multiple BSOD's, even with minimal running applications
Sorry about the title, I couldn't view the dmp files no matter what I tried so I don't know the codes and what not. I am genuinely at a loss with the current BSOD's, my usual ones are usually caused by not enough voltage to the CPU, not this one though. Even with only a hanful of tabs and...
BSOD Help and Support
Random BSOD running various applications
Hi all, I've been experiencing very frequent BSODs with different bug check codes and causes every time. When a BSOD happens, there is this buzzing sound and it will say something like 'initializing crash dump....' but nothing else will happen. I have to manually restart my laptop again. On a...
BSOD Help and Support
BSOD randomly throughout the day even while not running applications
Hp Pavillion DV7 has now randomly started Blue Screening as of yesterday. This occurs even when nothing has been opened and is just sitting at the desktop. Only change on system was an upgrade three weeks ago to a Kingston HyperX 3K 120gig SSD drive. System is running a fresh install (installed...
BSOD Help and Support
BSOD running graphic intensive applications
Hello, my pc specs are: windows 7 professional x64 ASUS M4A890GTD PRO/USB3 mobo AMD 1090T @ stock clock 2x2GB GSkill ddr3 @ 1600Mhz 1.6V nVidia GTX 460 @ (heavily overclocked in that past, currently at stock) 2x SATA IDE HDDs Corsair 850TX 850W PSU
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App