Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on every start! Only works in fail safe mode! BBcode:116

08 Nov 2014   #1
Draisel

Windows 7 Ultimate x64
 
 
BSOD on every start! Only works in fail safe mode! BBcode:116

So today my pc can't start up on normal mode! I always get BSOD! It works in fail safe mode only!
I tried to uninstall the video card drivers and after that it was good on normal startups too! But after i reinstalled the drivers it went back to the same!
Can i get some advice how to fix it?
I also ran SF_Debug_Tool.bat which was linked on:LINK don't know if this helps or not! I attached the file that it generated!


My System SpecsSystem Spec
.
08 Nov 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

All the BSODs are stop 0x116, caused by display.

As you cannot boot in normal mode without this BSOD but can boot in safe mode without any BSOD, it makes one thing clear that without the nvidia display the computer works fine. Cause, Safe mode uses the generic display only.
Code:
           DAC type: 
         Device Key: Enum\
     Display Memory: n/a
   Dedicated Memory: n/a
      Shared Memory: n/a
       Current Mode: 800 x 600 (32 bit) (1Hz)
Stay in safe mode. Uninstall the installed display driver using Display Driver Uninstaller.
Then boot back to normal mode, download and install 340.52 WHQL.
Follow NVIDIA Drivers - Avoid Problems to have a perfect and clean driver installation.

Is the computer is able to take this driver? Let us know.

If you have any other graphics card, or if you can borrow one from friends or family, apply it there and see how the computer behaves with another card. This test will give you important conception about the issue.
My System SpecsSystem Spec
08 Nov 2014   #3
Draisel

Windows 7 Ultimate x64
 
 

I tried to reinstall again as u said but i still get bluescreen!
I have a 10 yrs old graphics card which is ati radeon 2600 and it works fine without bluescreen!!
I think my Gtx 460 died then!
Let me know if i can do anything or its just the end of the card!

Thanks for the fast response!
My System SpecsSystem Spec
.

09 Nov 2014   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Draisel View Post
I have a 10 yrs old graphics card which is ati radeon 2600 and it works fine without bluescreen!!
I think my Gtx 460 died then!
Almost there.

One more thing you can try, to use this card in another computer. If the result is the same, you are absolutely right with your decision.

But if you cannot do it, you can abandon the card with the information you already have.
My System SpecsSystem Spec
09 Nov 2014   #5
Draisel

Windows 7 Ultimate x64
 
 

Okay thanks for the help! I'l mark the thread as solved!
My System SpecsSystem Spec
Reply

 BSOD on every start! Only works in fail safe mode! BBcode:116




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD only occurs in normal mode, Works fine on safe mode.
Everytime i open my pc up in normal mode, it seems to restart itself within a few seconds to a few minutes, It tends to happen when i open up a program like Chrome. I',m currently on safe mode with networking and have done registry cleaners, updated video card drivers and looked for viruses, yet...
BSOD Help and Support
BSOD BCCode 50. freezes in normal mode, works fine in safe mode
laptop has been randomly freezing. cursor disappears no keyboard function. only thing to do is manual shutdown. Now getting a BSOD error 50. any help?
BSOD Help and Support
BSOD when trying to boot in normal mode, safe mode works fine
My Toshiba satellite will only boot in safe mode tried sfc/scannow getting this message Windows resource protection found corrupt files but was unable to fix some of them. I've tried a system restore but that wasnt very successful either, if I uploaded the CBS log of the scan could someone...
BSOD Help and Support
Computer works in safe mode. Restore/repair fail...help!
My computer is very inconsistent and extremely slow in normal made. i use msconfig to only use windows programs and that worked for a couple weeks and now has failed me. I tried restoring it and the restore fails. I used the sfc/scanow and it cant finish. I do not have a disk drive on my computer...
General Discussion
Computer wont start up. Works on Safe Mode.
My computer does not go past the "starting windows" logo on my computer. When it does the cursor just stays there loading. On top of that im not even able to do a system restore because of some type of error. Everything works fine on Safe Mode, and I really dont think its a virus. Im desperate,...
General Discussion
BSOD (0xC000021A) on Start Up. Works in Safe Mode.
Used WhoCrashed Tried System Health and got an error. Windows 7 - 64 - no (Vista)
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App