BSOD on every start! Only works in fail safe mode! BBcode:116


  1. Posts : 3
    Windows 7 Ultimate x64
       #1

    BSOD on every start! Only works in fail safe mode! BBcode:116


    So today my pc can't start up on normal mode! I always get BSOD! It works in fail safe mode only!
    I tried to uninstall the video card drivers and after that it was good on normal startups too! But after i reinstalled the drivers it went back to the same!
    Can i get some advice how to fix it?
    I also ran SF_Debug_Tool.bat which was linked on:LINK don't know if this helps or not! I attached the file that it generated!
      My Computer


  2. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #2

    All the BSODs are stop 0x116, caused by display.

    As you cannot boot in normal mode without this BSOD but can boot in safe mode without any BSOD, it makes one thing clear that without the nvidia display the computer works fine. Cause, Safe mode uses the generic display only.
    Code:
               DAC type: 
             Device Key: Enum\
         Display Memory: n/a
       Dedicated Memory: n/a
          Shared Memory: n/a
           Current Mode: 800 x 600 (32 bit) (1Hz)
    Stay in safe mode. Uninstall the installed display driver using Display Driver Uninstaller.
    Then boot back to normal mode, download and install 340.52 WHQL.
    Follow NVIDIA Drivers - Avoid Problems to have a perfect and clean driver installation.

    Is the computer is able to take this driver? Let us know.

    If you have any other graphics card, or if you can borrow one from friends or family, apply it there and see how the computer behaves with another card. This test will give you important conception about the issue.
      My Computer


  3. Posts : 3
    Windows 7 Ultimate x64
    Thread Starter
       #3

    I tried to reinstall again as u said but i still get bluescreen!
    I have a 10 yrs old graphics card which is ati radeon 2600 and it works fine without bluescreen!!
    I think my Gtx 460 died then!
    Let me know if i can do anything or its just the end of the card!

    Thanks for the fast response!
      My Computer


  4. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #4

    Draisel said:
    I have a 10 yrs old graphics card which is ati radeon 2600 and it works fine without bluescreen!!
    I think my Gtx 460 died then!
    Almost there.

    One more thing you can try, to use this card in another computer. If the result is the same, you are absolutely right with your decision.

    But if you cannot do it, you can abandon the card with the information you already have.
      My Computer


  5. Posts : 3
    Windows 7 Ultimate x64
    Thread Starter
       #5

    Okay thanks for the help! I'l mark the thread as solved!
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:20.
Find Us