Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD's consistantly while in normal boot

10 Nov 2014   #1
Echokiid

Windows 7 Unlimited x64
 
 
BSOD's consistantly while in normal boot

Ive been getting BSOD's like everytime I do simple things like log into steam, browse the internet,etc. I know its not ram as I just bought a new stick today which replaced my old ones and it runs fine in Safe mode.
the first dump is with my old ram sticks
the second is with my new ram stick

Please help, all I want to do is play games


My System SpecsSystem Spec
.
10 Nov 2014   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, Echokiid. I'll see if I can help you with this.
This is what the dump files say

Code:
VIDEO_MEMORY_MANAGEMENT_INTERNAL (10e)
The video memory manager encountered a condition that it can't recover from. By crashing,
the video memory manager is attempting to get enough information into the minidump such that
somebody can pinpoint what lead to this condition.
Arguments:
Arg1: 000000000000000b, Driver returned an invalid error code from BuildPagingBuffer.
Arg2: fffff8800532e4e0
Arg3: ffffffffc000000d
Arg4: 0000000000000000
Code:
 atikmdag
start             end                 module name
fffff880`0f030000 fffff880`1009a000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Mon Sep 15 17:21:08 2014 (54176654)
    CheckSum:         00FFED07
    ImageSize:        0106A000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
PCIIDEX
start             end                 module name
fffff880`00c76000 fffff880`00c86000   PCIIDEX  T (no symbols)           
    Loaded symbol image file: PCIIDEX.SYS
    Image path: \SystemRoot\system32\drivers\PCIIDEX.SYS
    Image name: PCIIDEX.SYS
    Timestamp:        Mon Jul 13 18:19:48 2009 (4A5BC114)
    CheckSum:         00019CC5
    ImageSize:        00010000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
PCI IDE Bus Driver

Code:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
 
MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041284, A PTE or the working set list is corrupt.
Arg2: fffff980146b6001
Arg3: 0000000000003458
Arg4: fffff780c0000000

Code:
 Ntfs
start             end                 module name
fffff880`0120d000 fffff880`013b6000   Ntfs       (pdb symbols)          c:\symcache\ntfs.pdb\CF8C94B9CD6A4D5697235BA5374DA2532\ntfs.pdb
    Loaded symbol image file: Ntfs.sys
    Mapped memory image file: c:\symcache\Ntfs.sys\52E1BE8A1a9000\Ntfs.sys
    Image path: \SystemRoot\System32\Drivers\Ntfs.sys
    Image name: Ntfs.sys
    Timestamp:        Thu Jan 23 19:14:50 2014 (52E1BE8A)
    CheckSum:         0019F25D
    ImageSize:        001A9000
    File version:     6.1.7601.18378
    Product version:  6.1.7601.18378
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.7 Driver
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     ntfs.sys
    OriginalFilename: ntfs.sys
    ProductVersion:   6.1.7601.18378
    FileVersion:      6.1.7601.18378 (win7sp1_gdr.140123-1436)
    FileDescription:  NT File System Driver
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
NTFS File System Driver

Those were from the last 5 dump files. Please note each one lists a different problem and each one is a different stop code.

Please fill out your System Specs


information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible. Please make them as specific as possible, as we sometimes need to look up a component which requires the Manufacturer and model number. Also please include such things as you PSU and your CPU Cooler, and anything else that you think may help.


If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs

Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Also, please reinstall your graphics driver. This will help hopefully

I am going to give you some links that will help you get a good clean install and not have any drivers you don't need that will conflict with other drivers. Download a WHQL driver from http://www.sevenforums.com/graphic-cards/329659-latest-amd-catalyst-video-driver-windows-7-a.html . Once you have them downloaded, uninstall you current driver from control panel. next clean up any left over drivers from following this tutorial http://www.sevenforums.com/tutorials/83814-drivers-clean-left-over-files-after-uninstalling.html and select only ATI Display Drivers. After you have done that and rebooted, install the new driver, only select custom install and install only what you have to. Very few people need most of what they include. You do not need the audio/HDMI drivers as you already have that in your Motherboard drivers. Unless there is some reason you need them, the only thing you really need is the Display Driver.
My System SpecsSystem Spec
10 Nov 2014   #3
Echokiid

Windows 7 Unlimited x64
 
 

this is a list of my current drivers. see anything that would cause BSOD?
My System SpecsSystem Spec
.

Reply

 BSOD's consistantly while in normal boot




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on Normal Boot Whilst Logging In
Hello all, I get a BSOD whenever I log into an account on a normal boot. If I simply leave the computer on the user selection screen, there is no BSOD. Only upon selecting an account, beginning to log in, and seeing the "Welcome" text does the BSOD occur. It does not occur when booted in Safe...
BSOD Help and Support
consistantly getting BSOD athrx.sys ?
Hey got a new computer, got everything installed but notice today ive been consistently getting BSOD. Not sure if it has anything to do with me messing around with the pagefile. from what i read online it say it has something to do with my wireless drivers, yet ive updated it. the here is a screen...
BSOD Help and Support
BSOD on startup, next boot is normal
Hello. Today when computer started automatically to run windows update, I had found it in BSOD state with message "REFERENCE BY POINTER" or something like that. I tried three following reboots but it always happened again. So I booted to safe mode (with networking) and than back to normal mode and...
BSOD Help and Support
Always BSOD in normal boot contd
always bsod whenever normal boot artifacts on logo post screen (bios), deformed bios character (most alphabet turn $$), horizontal green lines all over the screen just before windows (during windows logo), then BSOD. atikmpag.sys it happen again after cleaning the graphic card, roll back...
BSOD Help and Support
always BSOD in normal boot
Hello and good day, my friends pc got this bsod crash everytime it boots. also the screen is filled with green thing all over,green lines (artifacts?) ive tried; 1. reinstalled drivers (graphics & network), 2. reinstalled OS (win7 ultimate sp1), 3. reset CMOS (reseat battery) but still the...
BSOD Help and Support
BSOD on Boot, only normal mode.
Quick Background: I just installed windows 7, and downloaded all of the updates, installed drivers from NVidia for my 560ti, and Steam, so I can begin downloading games. I reboot the computer into regular mode, and as stated above, BSOD. I succeed booting into safemode with networking, and am...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App