Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD with New Machine STOP: 0x000000F4

19 Nov 2014   #1
MatrixWriter

Windows 7 Ultimate x64
 
 
BSOD with New Machine STOP: 0x000000F4

Hi Everyone,

I've tried looking around to see if I could get this resolved but error code that follows the 0x000000F4 can't be found anywhere.

Here IS the full error code:
STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8033F74B30, 0xFFFFFA8033F74E10, 0xFFFFF800025E7DB0)

Does not provide any mindumps or dump files. Upon reboot, system mentions no issues or clears it out - can't seem to get them. I've tried running utilities to get the logs but no luck. I can try again later.

Specs:
The PC is a Supermicro Super Server (4U Tower) and it has dual Xeon processors (E5-2630 v2), LSI MegaRAID SAS 9271-8i, X9DRG-QF motherboard, and 3x AMD W9000 GPUs in Crossfire Pro mode, 64 GB RAM, 2x Samsung SSD 240 GB 840 Pro, and 2x Seagate Constellation 2TB. Drives are in RAID 1. Boot drive is the SSDs and storage is on the Seagate ones.


Here's the background:
Unit arrived onsite and I installed the GPUs (I request when PCs are shipped to have the GPUs removed to prevent damage to the PCIe bus and or GPU itself).

I proceed to install Windows 7 Ultimate x64 as normal, everything is going smoothly.
I install the drivers from the manufacturer too in this order: Chipset, SATA, LAN driver, then GPU.

When I reboot the PC, the system gets to a black screen after the Windows logo. So I decided reboot in safemode and do a system restore to undo the GPU driver install. I go to AMD's site and download the auto driver install which gave me the latest FirePro drivers. Installation went fine and smoothly. Rebooted the PC and I get to the desktop. About 10 minutes later, the system BSODs with the stop code listed above.

System auto reboots - so I looked up the general stop error meaning it is could mean driver or hardware issues.

I decide to install some stress testing utilities - 3DMark and FurMark. I stress test the machine for about an hour and everything is seems good. But then it BSODs about 10 minutes later.

I did clear out the CMOS and pulled out the GPUs one by one and ran the stress test on each GPU - I don't think the GPUs are bad...

Do you think the hardware got damaged during shipment? Do I need to pull everything out and reseat again?

Just to mention, the BSOD doesn't show any minidumps or error when it reboots so hard to get the dump files.

Any help would be much appreciated!


My System SpecsSystem Spec
.
20 Nov 2014   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

It does not create a dump file? OK, still you Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Attach the data with your reply post.
My System SpecsSystem Spec
20 Nov 2014   #3
MatrixWriter

Windows 7 Ultimate x64
 
 

Sorry for not including the dump file.

However, I did manage to solve the issue. For future reference if someone has this issue, it was related to a faulty NEC USB PCIe card. I removed it and the BSOD issue went away.


Please close this thread.
My System SpecsSystem Spec
.

Reply

 BSOD with New Machine STOP: 0x000000F4




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Stop: 0x000000f4
I haven't been able to figure out any particular pattern to it other than after I reboot, it tends to blue screen two or three times during start-up and then works fine. I am running windows 7 64-bit Home Premium. Thanks!
BSOD Help and Support
bsod stop 0x000000f4
Hi there, I have been receiving bsod stop 0x000000f4, 8008401950,8008401c30 errors. i5 2500 k win 7 pro 64 bit evga gtx570 64 gb crucial ssd 1 tb wd caviar black
BSOD Help and Support
BSOD Stop:0x000000F4
I am trying to troubleshoot BSODs I'm having on a machine I built about 9 months ago. The BSODs started about a month ago. Here is the info on my machine: Hardware Motherboard-Asus P6X58D Premium PSU-Antec True Power New 750W BIOS-ver 1002 ...
BSOD Help and Support
Bsod stop: 0x000000f4
Win Pro 7 x64 HP 8540w (Core i7 M620, nVidia Quadro FX 880M, 8 GB RAM, 320 GB HD w/66 GB Free) BSOD today (2nd time in the last 3 days) with the following: "STOP: 0X000000F4 (0X0000000000000003, 0XFFFFFA800A02EA00, 0XFFFFFA800A02ECE0, 0XFFFFF8000357F5D0) Physical memory dump FAILED with...
BSOD Help and Support
Stop 0x000000F4 BSOD
I just fresh installed windows 7 64-bit and i willl be surfing the web or something and bame i get the stop 0x000000F4 bsod screen and I am not sure why it keep poping up. If you want to contact me futher aim me - edhs ladies man or respond here. Thanks, DarkClown12
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App