Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After windows installation 0x04F

27 Nov 2014   #1
gunar

Windows 7 Home premium X64
 
 
BSOD After windows installation 0x04F

After being haunted by multiple different BSOD's I did a clean windows 7 installation using an installation disk and the product key found under my laptop.

however I still get a BSOD every time about 5 minutes after starting up (works fine in safe mode).
The stop code is 0X000000004F in the error log it displays critical error event id 41 task category 63 kernel power faillure.

I used the program described in the rules to save my system information and it's attached to the thread.

all help is welcome,
Thanks in advance


My System SpecsSystem Spec
.
28 Nov 2014   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome to the Forum gunar,

There are no dumps in the zip.

Make sure your dump logging is enabled.
  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click System.
  3. Click the Advanced tab, and then click Settings under Startup and Recovery.
  4. Check Write an even to the system log, and Automatically restart.
  5. In the Write debugging information list, click Small memory dump (256k).

Location of Dumps:
C:\Windows\minidump

 Clean boot
Reduce items at start-up. No software except anti-virus is required plus doing this improves the time for logging into windows:
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
  • Click on the
  • Type CMD on Search
  • Left click and Run as Administrator
  • Type SFC /scannow
Full tutorial here:
My System SpecsSystem Spec
Reply

 BSOD After windows installation 0x04F




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD during windows installation
recently i had multiple bsod after a video driver was updated randomly without my consent. after trying everything i could to fix it (f8, chkdsk, malwarebytes, repair, system restore, safe mode, etc.) i tried using acer erecovery management to restore my laptop. unfortunately during the...
BSOD Help and Support
BSOD after windows 7 Installation
I had windows 8 trial on my lap for few days. It suddenly stopped working and showed a screen with a message as " Attempting Repairs " but never booted. I experienced BSOD then. Today I installed a new version of windows 7 after formatting C: but I didn't format D:. Now after successful...
BSOD Help and Support
BSOD On Wake From Sleep : 0x07A / 0x04F / 0x03B
Hi All! Around mid-May I put the following system together: Processor: i5-3570K Motherboard: GIGABYTE GA-Z77X-UD5H-WB Bios Version: F8 Memory: CORSAIR Vengeance CMZ8GX3M2A1600C9 (8GB (2 x 4GB) DDR3) Graphics Card: EVGA 02G-P3-1568-KR (GeForce GTX 560 Ti 2048 MB GDDR5) Hard Drive: OCZ...
BSOD Help and Support
BSOD during windows installation
Ive have recently been having a lot of BSOD with the memory management error code on my pc lately so I decided to back up my files, wipe my HDD, and install a new copy of windows 7. The problem is that during the installation of windows I keep getting a BSOD with the bad pool header error code....
Installation & Setup
BSOD after new windows installation
Hi all, after a new and fresh installation of Windows 7 I have a BSOD. Is the second time that I reinstall Windows for this problem. BSOD description: Firma problema: Nome evento problema: BlueScreen Versione SO: 6.1.7600.2.0.0.768.3 ID impostazioni locali: 1040 Ulteriori...
BSOD Help and Support
BSOD during installation of windows 7
Hello I've got one mayor problem during installation of windows 7. At last step of installation BSOD appears "completing installation". Maybe anybody have any experience with that. I really like to test new operation system from Microsoft. I also run Windows 7 Upgrade Advisor Beta but non of...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App