Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD using FreemakeVideoConverter Page_Fault_ other frequent BSOD

21 Jan 2015   #111
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I can try to use the French. Although I can not read French, I am familiar enough with Windows to have a fairly good idea of what they say. Also, the driver names are in English, so I recognize those. I am concerned right now with your HP printer driver. Your driver is dated 10-20-2009, But,
Quote:
Windows 7 was released to manufacturing on July 22, 2009, and became generally available on October 22, 2009, less than three years after the release of its predecessor, Windows Vista.
Which makes me doubt it is a Windows 7 driver. Even if it is, a driver in excess of 5 years old is pretty old, as you have seen from uopdating other drivers. Even if the printer is not turned on, the driver is loaded at startup. A very wrong or especially wrong operating system driver can crash a computer at any time. Some, would not even start at all. But Windows is rather forgiving about a lot of things.

To save me from reading 3 pages of posts, if you have not already done so,
Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.

Have you considered a clean install of Windows? If you have or would like to do so, I can give you very specific instructions that will make it fairly easy. If it was my computer and I believed it was not a hardware problem, I would have already done one. If you consider all the time that has been spent trying to resolve this problem, we would be way ahead if we had done a clean install at the beginning. My personal computer, my philosophy is I am not going to spend weeks just trying to find the problem and then more time trying to fix it. I do clean installs frequently, mostly because this is used as a test machine for many things, even including some of the things we are doing. So, I can do one rather quickly simply because it is not the nightmare you have always heard it was if you think about it and plan for it in advance. But, that is your decision to make. But, if you do one I would like to do it in a very specific way which will take much longer, but will tell us very quickly where the problem is. If you think about doing one I can help you with it so it will not be as much of a pain as everyone says. But, I would still like to be reasonably certain that the problem is not hardware. If it is hardware, the clean install is not going to help at all.
.


My System SpecsSystem Spec
.
21 Jan 2015   #112
jeanpierregeorg

windows 7 Home Premium 64bit service pack 1
 
 

I just loaded hp update software utility ; it did not find any more recent driver. So, I cannot do anything about this driver except desinstall the hp 4200 and run like that for some days, which I must try. Memtest86 : I have already burned a CD with memtestX8- 5.01and run that test end of december for 9 complete passes without fail. I know I have to run it again. I have to remember what to do after F8 to configure the boot order. Yesterday I missed the good configuration, with the repar system CD.
Sorry but I still feel stressed when running the pre boot commands.
Finally I could install an english speaking Windows thru "vistalizator" hope it is not virus loaded.
My System SpecsSystem Spec
21 Jan 2015   #113
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If you think it is virus loaded don't use it. If you run memtest already, I see no reason you should run it again unless you just want to in order to be sure. If you have had a BSOD since the last file you uploaded, run it again and send it to me. I would certainly try with the printer and all software with it uninstalled again. I would really like to run a stress test on your GPU and see if that is your problem. I just have to find the right one. I'm afraid what we usually run would be too hard on your GPU. Have you run the online Virus scans? I believe we ran driver verifier didn't we? I just want to make sure all our bases are covered, hardware and drivers.

When you boot from another device using the one time boot menu key, you use the up and down arrows to select the device you want to boot from and with it highlighted push enter. After that you should have to do nothing. If it is a CD or DVD some computers have a message pop up that says if you want to boot from the dvd press any key. If it says that press enter, but you only have about 3 or 4 seconds to do it. But, using the one time bot menu key, you usually don't have to do that, but sometimes you will. Running startup repair here is a tutorial that may help you. Watch for the links in it. If you are in doubt, click the link and it will show you what to do. Startup Repair If you are ever in doubt about the instructions I give or have questions, feel free to ask, I don't mind a bit. Just realize we are on the other side of the world and I have to sleep sometime and have other things I need to do. But I will answer as soon as possible. But, don't hesitate to ask.
My System SpecsSystem Spec
.

02 Feb 2015   #114
jeanpierregeorg

windows 7 Home Premium 64bit service pack 1
 
 
New minidump without BSOD

Only 1 BSOD in 10 days, but several freeze with necessity to unplug power supply, replug and reboot
and this evening first time (in one month) I was reading video .ts files with MPC-HC 1.7.3 ,in 20 minutes two successive stops with minidump, but no BSOD (just a stop and necessity to switch off then on and reboot).
I attach the grab all files.
One remark about event viewer and errors :
At each start there is a sequence of 4 errors
NTFS
Kernel Microsoft security
and twice printer spool,
all this seems without consequences.
For the freeze problem, very often in the first 10 minutes of a session, I suspected a problem with supply, is that possible ?
If the Nvidia driver is one of the real problems, what can I try as I seem to have the most recent one.
Is this related to an acceleration problem ?
My System SpecsSystem Spec
02 Feb 2015   #115
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You have had NTFS errors all along. That is the type of file system Windows uses. That is typically a hard drive problem or a file corruption problem. I would run Check Disk (Disk Check) on the Mechanical hard drives, run disk defragmenter on the Mechanical Hard drives, but DO NOT run the disk defragmenter on your SSD. an then
open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

I have suggested before you uninstall the Printer and all associated drivers and Software for it, to eliminate that as a source of the problem.

I would also keep a close check on CPU and GPU temps. I run it all the time and can at any time see the temps in my system tray.

You having to turn the PSU off and then turn it back on is classic PSU problem which can be the source of many, if not most, of the problems you are having. I would suggest finding a friend who can loan you a good, known working PSU to test in your system. I always suggest trying to make sure what the problem is before I start replacing parts. Also, make sure the fan is running on your PSU and it is not over heating. The PSU pulls air in through the fan to cool itself off and blows hot air out of the back of the case. The fan should ramp up as the PSU gets warmer and slow down when it is cooler.

I would also uninstall Avast using the Avast Uninstall program (https://www.avast.com/uninstall-utility) just to eliminate that as a problem. Replace it with Microsoft Security Essentials (Microsoft Security Essentials - Microsoft Windows)
My System SpecsSystem Spec
04 Feb 2015   #116
jeanpierregeorg

windows 7 Home Premium 64bit service pack 1
 
 

I ran sfc /scannow found corrupt files and repaired. After that I ran chkdsk no errors .

My System SpecsSystem Spec
04 Feb 2015   #117
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I would run scannow again just to be sure everything is fixed.
My System SpecsSystem Spec
04 Feb 2015   #118
jeanpierregeorg

windows 7 Home Premium 64bit service pack 1
 
 
just ran again sfc /scannow => no error

Yes , had that idea and ran , no file corrupted this time
My System SpecsSystem Spec
04 Feb 2015   #119
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Am I correct that you only BSOD when running Freemake?
My System SpecsSystem Spec
04 Feb 2015   #120
jeanpierregeorg

windows 7 Home Premium 64bit service pack 1
 
 

BSOD : last 12 days, only BSOD while reading videos via MPC-HC Hardware accelerated (2 successive BSOD in 20 minutes)
But several freezing (mostly first 20 minutes of a session).
Previously most BSOD either in the first 20 minutes or using Freemake.
I did not use freemake for 2 weeks.
I suspect also that some BSOD would happen when the screen saver starts a slide-show, because these BSOD happens when I am not working.
My System SpecsSystem Spec
Reply

 BSOD using FreemakeVideoConverter Page_Fault_ other frequent BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Frequent BSOD playing SimCity / Frequent applications crashing
Hello, This has all started since installing EA's Origin in order to play SimCity and Battlefield 3, the later crashes with a BSOD Stop 0x0000001 within about 1 minute of starting, SimCity will give me up to an hour before BSOD'ing. It's 50:50 whether it's a BSOD or a 'SimCity has stopped...
BSOD Help and Support
Need help, Frequent BSOD
***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057. BUGCHECK_STR: 0x4E_7 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT CURRENT_IRQL: 0
BSOD Help and Support
Random but frequent BSOD and reboot without BSOD
Hi guys, I've experience problems with this laptop ever since I bought it. I never used it heavily at the start and assumed it was just a driver and that i'd figure it out later. Well; now is later and I can't figure it out. I've done a re-install of the OS (HP recovery) This system is...
BSOD Help and Support
BSOD mostly when playing games, DRIVER_IRQL_... and PAGE_FAULT_...
Hi, I'm getting DRIVER_IRQL_NOT_LESS_OR_EQUAL and PAGE_FAULT_IN_NONPAGED_AREA BSOD's when playing games (around once or twice a month), and sometimes (almost never) when my PC is just running idle. I've been getting these BSOD's for more than 6 months now. At first I ran memtest for an entire...
BSOD Help and Support
Frequent crashes (BSOD) on the new PC with BSOD Dump attached
Hi guys, can anyone please help my problem, I had my PC crashing almost everyday, and several times a day. Please find my attached collection of memory dump & PC Health report. Thanks very much! I am on Windows 7 Ultimate x64 - x64 - the original installed OS on the system - Ultimate -...
BSOD Help and Support
Frequent BSOD
I've been having BSOD on Windows 7 Home Basic x64. I recently placed my old Vista 64bit home premium CD into my computer and still got the same problems. Anyway, I get the BSOD frequently even when doing minimul stuff on the computer, so heres the ones I've got today (18th January 2011). Also,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App