Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Mostly while playing or watching videos

05 Dec 2014   #1
iPe7eR

Windows 8.1
 
 
BSOD Mostly while playing or watching videos

Hello all.

Recently after getting my new desktop (it's a week old) 2 days after getting it I started getting some random BSODs (As said in the title, mostly when playing or watching videos). I basically get the BSOD and then, of course, the pc reboots. My OS is windows 8.1 so I tried to update with all the latest updates but no luck. I also updated my drivers to the latest ones (Atleast I think I did it right) Hope you guys will be able to help me out and thanks for your time!

Attachment 342282


My System SpecsSystem Spec
.
05 Dec 2014   #2
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {9b, 200, 10, fffff800c10d1121}

*** WARNING: Unable to verify timestamp for VerifierExt.sys
*** ERROR: Module load completed but symbols could not be loaded for VerifierExt.sys
Probably caused by : ntkrnlmp.exe ( nt!VerifierBugCheckIfAppropriate+3c )

Followup: MachineOwner
---------
Ensure Windows is fully updated.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff8025fa5b895, 0, 232}

Probably caused by : memory_corruption

Followup: memory_corruption
---------
Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Reference this tutorial to help you use MemTest86+:
RAM - Test with Memtest86+

Uninstall this program - not needed.
Code:
Start Menu\Programs\Driver Booster 2	Public:Start Menu\Programs\Driver Booster 2	Public
Code:
Start Menu\Programs\Ultimate Boob Wars!! ~Big Breasts vs Flat Chests~	Public:Start Menu\Programs\Ultimate Boob Wars!! ~Big Breasts vs Flat Chests~	Public
Start Menu\Programs\ƒtƒŠƒ‹ƒ{[ƒC	IPE7ER\iPe7eR:Start Menu\Programs\ƒtƒŠƒ‹ƒ{[ƒC	IPE7ER\iPe7eR
Start Menu\Programs\ƒtƒŠƒ‹ƒ{[ƒC\˜T*”N‚Í’j‚Ì–ºiDL”Łj	IPE7ER\iPe7eR:Start Menu\Programs\ƒtƒŠƒ‹ƒ{[ƒC\˜T*”N‚Í’j‚Ì–ºiDL”Łj	IPE7ER\iPe7eR
Perform a malware scan using this link:
Free Virus Scan | Online Virus Scanner from ESET
My System SpecsSystem Spec
05 Dec 2014   #3
iPe7eR

Windows 8.1
 
 

Quote   Quote: Originally Posted by Golden View Post
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {9b, 200, 10, fffff800c10d1121}

*** WARNING: Unable to verify timestamp for VerifierExt.sys
*** ERROR: Module load completed but symbols could not be loaded for VerifierExt.sys
Probably caused by : ntkrnlmp.exe ( nt!VerifierBugCheckIfAppropriate+3c )

Followup: MachineOwner
---------
Ensure Windows is fully updated.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff8025fa5b895, 0, 232}

Probably caused by : memory_corruption

Followup: memory_corruption
---------
Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Reference this tutorial to help you use MemTest86+:
RAM - Test with Memtest86+

Uninstall this program - not needed.
Code:
Start Menu\Programs\Driver Booster 2    Public:Start Menu\Programs\Driver Booster 2    Public
Code:
Start Menu\Programs\Ultimate Boob Wars!! ~Big Breasts vs Flat Chests~    Public:Start Menu\Programs\Ultimate Boob Wars!! ~Big Breasts vs Flat Chests~    Public
Start Menu\Programs\ƒtƒŠƒ‹ƒ{[ƒC    IPE7ER\iPe7eR:Start Menu\Programs\ƒtƒŠƒ‹ƒ{[ƒC    IPE7ER\iPe7eR
Start Menu\Programs\ƒtƒŠƒ‹ƒ{[ƒC\˜T*”N‚Í’j‚Ì–ºiDL”Łj    IPE7ER\iPe7eR:Start Menu\Programs\ƒtƒŠƒ‹ƒ{[ƒC\˜T*”N‚Í’j‚Ì–ºiDL”Łj    IPE7ER\iPe7eR
Perform a malware scan using this link:
Free Virus Scan | Online Virus Scanner from ESET
Ok thanks for the quick reply! btw those you specified for the virus scan are just some Japanese Visual Novels (Eroges as you can probably hint from one of the titles heheh ) and got them from trusthoworthy sites but I will scan anyway

Gonna run memtest this night and report back later for letting you know! And the only update I get for windows when checking is a windows defender update so I guess it's fully updated?

Well, thanks for the fast reply anyways! Will report back later
My System SpecsSystem Spec
.

06 Dec 2014   #4
iPe7eR

Windows 8.1
 
 

Ok so I did all the suggested things. Ran the malware test and removed all found issues, updated with all windows updates and lastly ran memtest. And here a weird thing happened. I went to bed letting memtest on for whole night (almost 9 hours) when I woke up this morning and checked, it completed only 2 passes(without errors) ? I think that's not supposed to happen after 9 hours of testing.

Had 2 more BSODs too today, one was this

Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\120614-46546-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.17415.amd64fre.winblue_r4.141028-1500
Machine Name:
Kernel base = 0xfffff800`cb889000 PsLoadedModuleList = 0xfffff800`cbb62250
Debug session time: Sat Dec 6 18:16:39.593 2014 (UTC + 1:00)
System Uptime: 0 days 2:53:17.303
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
..............
*** WARNING: Unable to verify timestamp for Ntfs.sys
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {b500190645, ffffd00021918018, ffffd00021917820, fffff800cba6c485}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
Probably caused by : ntoskrnl.exe ( nt+1e3485 )

Followup: MachineOwner
---------



The other one was a little bit weird. I was playing and suddenly the pc froze with audio looping and without giving a BSOD and it didn't even give a minidump In the system registry it got registered though, and as Kernel Power Error 41 (63) as all the others I got till now.
My System SpecsSystem Spec
06 Dec 2014   #5
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

You need to upload the new zip file.

I'd re-rerun MemTest86+........2 passes over 9 hrs isn't good.
My System SpecsSystem Spec
06 Dec 2014   #6
iPe7eR

Windows 8.1
 
 

I just had to do a windows 8 fresh install cause the pc kept freezing without even giving BSOD... And i honestly couldn't do anything.

Now the freezing is gone, but guess what? Got another BSOD 5 mins ago.. Here's the zip.

Attachment 342393
My System SpecsSystem Spec
06 Dec 2014   #7
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Reference this tutorial to help you use MemTest86+:
RAM - Test with Memtest86+

Don't do anything else except testing Memory.
My System SpecsSystem Spec
06 Dec 2014   #8
iPe7eR

Windows 8.1
 
 

Quote   Quote: Originally Posted by Golden View Post
Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Reference this tutorial to help you use MemTest86+:
RAM - Test with Memtest86+

Don't do anything else except testing Memory.
Ok thanks for the quick reply.

And just had a freeze, no BSOD, nothing, just the pc freezing, had to hard reboot cause nothing would work... Gonna run memtest and report back.
My System SpecsSystem Spec
06 Dec 2014   #9
iPe7eR

Windows 8.1
 
 

Running memtest and after a mere 40 minutes 2799 errors popped up. I guess this is pretty bad. Will let it run for more time but I guess that's already a pretty bad sign.
My System SpecsSystem Spec
06 Dec 2014   #10
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

There is no point running any further.

You need to determine if the problem lies with:

1. One or more of the RAM DiMM's, or
2. One or more of the RAM slots on the motherboard, or
3. Both of the above.

Remove all but ONE of the RAM DiMM's and place it in slot 1. Re-run MemTest86+ for 8 passes.

If you get NO errors, repeat the test with the same DiMM in the other motherboard slots. If no errors, then you know the motherboard is fine.

If you do get an error, test other RAM DiMM's in motherboard slot 1.
My System SpecsSystem Spec
Reply

 BSOD Mostly while playing or watching videos




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD While playing games or watching videos
I recently got a GTX 970 card which required me to upgrade my PSU and i bought EVGA SuperNova NEX 750B. I also reformat my windows 7 from 32bit to 64bit (Ultimate). I basically am experiencing random bsods where it says the error 'memory_management' its been happening for like 2-3 weeks to be...
BSOD Help and Support
BSOD while playing WoW and watching videos
Hello all. I am new here and i am very desperate for help since i have been trying to figure out this problem these past months. My laptop would at first just freeze for a second then turn to a black screen with a buzzing noise, forcing me to reboot. This would happen once in awhile, but has...
BSOD Help and Support
BSOD when playing games or watching videos
Hello I have been having very random BSOD problems for a while it has happened during a lot of games like civ 5 and batman arkham city it has happened while watching videos on youtube and it has happened while the computer isn't doing anything too! I am not sure what to do at all so any help would...
BSOD Help and Support
Constant BSOD while playing BF3 or watching videos
This is my first custom built system that I put together earlier this year. I installed all the current drivers from the ASUS website when it was built around april. Everything was fine up until a few months ago when BF3 starting freezing up on me. I thought it was just the game since others had...
BSOD Help and Support
BSOD when watching videos and playing games
I seem to be unable to play any games and recently the problem has escalated to any media whatsoever... I can get to the log in screen of a game, or 10 minutes into a video and it will just crash and give me a horrible blue screen of death. This is the thingie that comes up when it restarts:...
BSOD Help and Support
BSOD while playing or watching videos
Hi, I've never had this problem before.. since i bought the laptop it was never formatted, and a couple a days ago I did the first format, and ever since then after a while of running time, and mostly while playing a game, or watching a video on a website or a player it freezes and gives me the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App