Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD pagefault in nonpaged area 0x00000050 ntoskrnl.exe+75bc0

24 Dec 2014   #91
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by essenbe View Post
There were 2 dated the 24TH, both say the same thing

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff8800f13d160, fffff88003d7fdd8, fffff88003d7f630}
Probably caused by : atikmdag.sys ( atikmdag+cd160 )
Followup: MachineOwner
So video driver again, thanks essenbe.


My System SpecsSystem Spec
.
30 Dec 2014   #92
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by stavesacre03 View Post
Quote   Quote: Originally Posted by Layback Bear View Post
I'm think possibly a bad bad batch of plastic. The last person was also experienced. I do stay away from 90 deg cable connectors. I only use 180 deg (straight) connectors.
Did the plastic break on the data or power connection?
Both I believe, I will take a look a bit later. And i only use 180 deg as well.
Just an update--the plastic was broken only on the data connection. Samsung agreed to RMA the SSD and will be sending me a replacement. In the meantime I purchased another SSD (850 EVO) and just got everything installed tonight. I will update if I have any further BSOD. Based on previous timing (maximum of about 4 days between BSOD), I should know in the next 4-5 days. Fingers crossed. It may just be a placebo effect, but this new drive seems to load windows noticeably faster.
My System SpecsSystem Spec
31 Dec 2014   #93
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

placebo or not; if it feel good just smile and be happy.
My System SpecsSystem Spec
.

31 Dec 2014   #94
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

stavesacre03, did you build this computer yourself? Are you OK with working inside the computer? If you sre, we are going to try s few things. First, please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know. Also, what CPU cooler do you have?

Please go into bios and check your sata controller and tell me what it is set to (IDE,AHCI or Raid). It should be set to AHCI. Please look and tell me the values of your +12V, +5V and +3.3V

Please download and install CPU-Z CPUID - System & hardware benchmark, monitoring, reporting if you don't already have it. Please run it and post screenshots (Screenshots and Files - Upload and Post in Seven Forums) of the CPU, Mainboard, Memory and SPD tabs. On the SPD tab uou can select each dimm slot from a dropdown box in the upper left. I only need screenshots of the Dimm slots populated with ram.

When you installed the board, were there any extra standoffs installed on the case? There should be 1 for every hole in the board to screw it down, no more.

Do you have another graphics card or a friend that would be willing to help you by switching Graphics cards with you?

If you continue to have problems, we are going to try to see what it is.
My System SpecsSystem Spec
31 Dec 2014   #95
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by essenbe View Post
stavesacre03, did you build this computer yourself? Are you OK with working inside the computer? If you sre, we are going to try s few things. First, please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know. Also, what CPU cooler do you have?

Please go into bios and check your sata controller and tell me what it is set to (IDE,AHCI or Raid). It should be set to AHCI. Please look and tell me the values of your +12V, +5V and +3.3V

Please download and install CPU-Z CPUID - System & hardware benchmark, monitoring, reporting if you don't already have it. Please run it and post screenshots (Screenshots and Files - Upload and Post in Seven Forums) of the CPU, Mainboard, Memory and SPD tabs. On the SPD tab uou can select each dimm slot from a dropdown box in the upper left. I only need screenshots of the Dimm slots populated with ram.

When you installed the board, were there any extra standoffs installed on the case? There should be 1 for every hole in the board to screw it down, no more.

Do you have another graphics card or a friend that would be willing to help you by switching Graphics cards with you?

If you continue to have problems, we are going to try to see what it is.
Hi essenbe,
Scannow says it did not find any integrity violations.
SATA controller is set to AHCI.
BIOS readings are: +12.192, +5.040, +3.264-3.280
Screenshots of CPU-z attached as requested:
Attachment 344816

I actually ordered another video card and it will arrive today. I would like to hold off installing it until/unless I get another BSOD that points to the card as possible cause.
My System SpecsSystem Spec
31 Dec 2014   #96
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Everything looks OK except it is not reading your CPU correctly.
My System SpecsSystem Spec
31 Dec 2014   #97
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by essenbe View Post
Everything looks OK except it is not reading your CPU correctly.
Hmm, does this give the info you were looking for?
Attachment 344817
My System SpecsSystem Spec
31 Dec 2014   #98
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Ran CPU-z again, looks better now:
Attachment 344820
Forgot I had a mild overclock still set. Would you like me to change that?

EDIT: turned off turbo:
Attachment 344824
My System SpecsSystem Spec
31 Dec 2014   #99
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Yes, that's much better, thanks.
My System SpecsSystem Spec
01 Jan 2015   #100
stavesacre03

Windows 7 Home Premium 64 bit
 
 

BSOD overnight. Looks like atikmdag.sys again. Any reason to believe it's anything other than the video card at this point? I have a fresh windows install with latest AMD drivers only, directly from their site.
My System SpecsSystem Spec
Reply

 BSOD pagefault in nonpaged area 0x00000050 ntoskrnl.exe+75bc0




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Help! BSOD Pagefault in Nonpaged Area!
Hello guys, I'm new in this forums, and I'm here to try to find a solution to my problem. So, everytime I launch and play for a few minutes, a game called Crossfire, my PC shuts down and I get the Pagefault in Nonpaged Area BSOD... Everything was normal till yesterday, the problem appeared today...
BSOD Help and Support
BSOD Page Fault in Nonpaged Area (0x00000050)
I've seen some other posts on this error, but I'm having trouble following solutions since I can't install recommended software from safe mode. Every time I turn on the laptop and let it boot normally, it gives me the Page Fault in Nonpaged Area error. It then restarts and I can try to let it...
BSOD Help and Support
BSOD page fault in nonpaged area 0x00000050
So earlier today I thought I had a virus so I went to uninstall AVG and then re install it. Well when I tried to uninstall it I got the first blue screen. I then started to get them out of nowhere on a websites and Microsoft security essentials kept on saying I had some sort of virus. I then tried...
BSOD Help and Support
Constant random BSODs, Most recent was pagefault-in-nonpaged-area
Hello, i have been having a lot of trouble with my computer and its getting really frustrating. I get constant crashes playing games (WoW, LoL, Counter Strike, many others), my Google Chrome also crashes often, as well as Shockwave Flash crashing when watching you tube videos that that kind of...
BSOD Help and Support
BSOD, 0x00000050 (page fault in nonpaged area)
So this happened today out of nowhere when i opened steam and chrome all at one. (I do this every day but until know no problem) Btw i will be performing a fresh install after 2morrow i have included a bluscreen view image aswell as the dumps my system is OS: Windows 7 64bit home...
BSOD Help and Support
BSOD Page Fault in Nonpaged Area (0x00000050) twice.
My computer crashed with two system failures because of the Blue Screen of Death earlier this morning. One at 3:16am ET, and other at 3:48am. One is the computer puts into Sleep Mode, when I opened it, it still locks up the log-on screen, but Blue Screen appears, and secondly before I Shut Down...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App