Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD pagefault in nonpaged area 0x00000050 ntoskrnl.exe+75bc0

16 Dec 2014   #51
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

let's wait and see what happens with the changes you made. It is quite possible that drive could be much of the problems you had. I had a drive once that kept my computer from even posting. I took the computer apart and rebuilt it 3 times in 1 night before I finally found out it was a hard drive. So, yes the drive could cause a lot of problems.


My System SpecsSystem Spec
.
16 Dec 2014   #52
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Sounds good, thanks.
My System SpecsSystem Spec
16 Dec 2014   #53
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If anything comes up or you have any questions, be sure to ask. I don't mind at all.
My System SpecsSystem Spec
.

18 Dec 2014   #54
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Unfortunately, looks like I had a BSOD or crash. Computer restarted with error box when I returned home from work. Attached is dump file. Thanks for looking.
My System SpecsSystem Spec
18 Dec 2014   #55
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

The dump file is blaming your video driver

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff8800f18b160, fffff8800279fdd8, fffff8800279f630}
Probably caused by : atikmdag.sys ( atikmdag+cd160 )
Followup: MachineOwner
Code:
fffff880`0279f388  fffff880`040cb783Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0x3a783

Code:
atikmpag
start             end                 module name
fffff880`04091000 fffff880`04127000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Thu Nov 20 20:08:54 2014 (546E9EB6)
    CheckSum:         00093077
    ImageSize:        00096000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That code most often relates to a storage device or a lack of disk space but can also be memory or hardware compatability. Is there any reason to suspect your graphics card is malfunctioning? Please make sure you have GPU Temp monitoring program and run Furmark This will tell you how, although I really do not like speedfan. If you need suggestions of a temp monitoring program, I can give it to you. Monitor your temps during this test. Your temps will rise very high and very quickly and continue to climb until they level out. Once they level out you can stop the test, but during the test watch closely for any artifacts or anything unusual happening on the screen. If the temps get too high, stop the test. Video Card - Stress Test with Furmark
My System SpecsSystem Spec
18 Dec 2014   #56
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Remember the external drive I mentioned I had concerns with? Well, I reformatted it and ran Seatools for Windows again and it passed short and long tests. It also passed check disk with no problems. I have it plugged in, but it is blank (nothing added to the drive). I still think it was acting strange. Should I unplug it and see what happens? Since the error could be storage I wonder if this is the problem? I will certainly run Furmark as well and monitor temps and report those values.
My System SpecsSystem Spec
18 Dec 2014   #57
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Yes, I would definitely unplug it. When you reformat it or Seatools or Check disk says it 'fixed' it, what it actually does is notify the controller not to write data to that sector, it does not and cannot fix it. Typically, the damaged sector will continue to grow and more data will be compromised. Causing more errors.

But, that coupled with the error code makes me believe that is much of the problem. However, most of what has been blamed for the crashes has been fairly consistently the graphics drivers. I just hope you are not having more than one problem.

The error code is usually a storage error or other hardware problem sometimes.
My System SpecsSystem Spec
18 Dec 2014   #58
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Unplugged sketchy external HD. Ran Furmark with settings as described. Temp tops out at 95 degrees. I let it run for 25 minutes to see if there were any artifacts--none seen. I smell what I would describe as hot plastic, but not smoke. I've never seen any artifacts with this video card. The only thing I've ever noticed was the horizontal lines when windows first booted after enabling driver verifier (saw that twice--the whole system was frozen though). I contacted XFX a week ago to see if they felt that was a problem and they said if no artifacts during Furmark, the card was OK. Of course, who knows.
My System SpecsSystem Spec
18 Dec 2014   #59
stavesacre03

Windows 7 Home Premium 64 bit
 
 

Shall I enable Driver Verifier again?
My System SpecsSystem Spec
18 Dec 2014   #60
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Yes, but first try running memtest86+ and yes, I know what a Pain it is.
Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
My System SpecsSystem Spec
Reply

 BSOD pagefault in nonpaged area 0x00000050 ntoskrnl.exe+75bc0




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Help! BSOD Pagefault in Nonpaged Area!
Hello guys, I'm new in this forums, and I'm here to try to find a solution to my problem. So, everytime I launch and play for a few minutes, a game called Crossfire, my PC shuts down and I get the Pagefault in Nonpaged Area BSOD... Everything was normal till yesterday, the problem appeared today...
BSOD Help and Support
BSOD Page Fault in Nonpaged Area (0x00000050)
I've seen some other posts on this error, but I'm having trouble following solutions since I can't install recommended software from safe mode. Every time I turn on the laptop and let it boot normally, it gives me the Page Fault in Nonpaged Area error. It then restarts and I can try to let it...
BSOD Help and Support
BSOD page fault in nonpaged area 0x00000050
So earlier today I thought I had a virus so I went to uninstall AVG and then re install it. Well when I tried to uninstall it I got the first blue screen. I then started to get them out of nowhere on a websites and Microsoft security essentials kept on saying I had some sort of virus. I then tried...
BSOD Help and Support
Constant random BSODs, Most recent was pagefault-in-nonpaged-area
Hello, i have been having a lot of trouble with my computer and its getting really frustrating. I get constant crashes playing games (WoW, LoL, Counter Strike, many others), my Google Chrome also crashes often, as well as Shockwave Flash crashing when watching you tube videos that that kind of...
BSOD Help and Support
BSOD, 0x00000050 (page fault in nonpaged area)
So this happened today out of nowhere when i opened steam and chrome all at one. (I do this every day but until know no problem) Btw i will be performing a fresh install after 2morrow i have included a bluscreen view image aswell as the dumps my system is OS: Windows 7 64bit home...
BSOD Help and Support
BSOD Page Fault in Nonpaged Area (0x00000050) twice.
My computer crashed with two system failures because of the Blue Screen of Death earlier this morning. One at 3:16am ET, and other at 3:48am. One is the computer puts into Sleep Mode, when I opened it, it still locks up the log-on screen, but Blue Screen appears, and secondly before I Shut Down...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App