Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Various BCCodes 1a, d1, 24, 7e, 3b

15 Dec 2014   #11
Brian51

Win 7 home premium
 
 

NVIDIA GeForce GT 630 video card benchmark result - AMD FX-8120,ASUSTeK COMPUTER INC. M5A99X EVO R2.0 new test ran today with monitor programs on. screen shots at idle right after bootup, then after running 3dmark tests.
I am going to put in a brand new PNY GTX 750 w/2GB now and run machine


My System SpecsSystem Spec
.
15 Dec 2014   #12
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Can you tell me, I can't find it, what the max GPU temp was? Also, I'm not sure about software readings of the voltages, but, if you will look, your +12V, +5V and +3,3V are all at the very bottom of the tolerable range. ATX Standards are +/- 5%. If you will look at the minimums, you will see they fall off to the very bottom of the standards range. Software readings are notoriously inaccurate. I use software too, but I use it only as a guideline. Those voltages would scare me.
My System SpecsSystem Spec
15 Dec 2014   #13
Brian51

Win 7 home premium
 
 

On the hwmonitor after the testing the graphics card high temp says 79deg C
Should have switched gpuz to semsors tab, sorry
Just got results from 3dmark primary test with new gtx750 card have to switch computers to send you info
My System SpecsSystem Spec
.

15 Dec 2014   #14
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, no problem, just let me know.
My System SpecsSystem Spec
15 Dec 2014   #15
Brian51

Win 7 home premium
 
 

NVIDIA GeForce GTX 750 video card benchmark result - AMD FX-8120,ASUSTeK COMPUTER INC. M5A99X EVO R2.0 new 3dmark results with new gtx750 card
I have a new 550w PSU here, I will change it out and test again.
My System SpecsSystem Spec
15 Dec 2014   #16
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Just so you know, almost all of the Mark 3D tests are CPU+GPU tests, the scores depend on both. If you want to check the GPU, run the Ungine tests, they are GPU only tests and tend to stress the GPU a little more. I do use both for system stability but use Heaven for testing the GPU.
My System SpecsSystem Spec
15 Dec 2014   #17
Brian51

Win 7 home premium
 
 

Ran Heaven with new PSU and video card. The main voltages look better, but some of the readings give me pause! They are too identical to the last PSU. Maybe its just me. I am going to run this system this way on/off waiting that BSOD. If I get none, tomorrow I will drop the old gtx630 back in and test. again
file:///C:/Users/Chas/Desktop/Brian%20save/Unigine_Heaven_Benchmark_4.0_20141215_1315.html
My System SpecsSystem Spec
15 Dec 2014   #18
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Yea, those voltages don't look much better than the other one. It could be the program too.
My System SpecsSystem Spec
15 Dec 2014   #19
Brian51

Win 7 home premium
 
 

OK, with the new PSU and Video card I have gotten 2 BSOD , 3B SYSTEM SERVICES EXCEPTION ( I got another 3b yesterday in safe mode when I started GPU-z, before I switched the PSU & vid) and I got an bccode 'a' ........
The only other thing I have seen is a little corrosion on the power connector for the sata drive
I included the dump. My nephew did tell me last night that it did crap out (bsod) several times BEFORE the troulbe with the video output and subsequent MB replacement.
My System SpecsSystem Spec
15 Dec 2014   #20
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Here are what I found from the 3 dumps from today. I know you said you have run memtest86+ a couple of times, but this is what the dump file says.

Code:
Use !analyze -v to get detailed debugging information.
BugCheck A, {28, 2, 0, fffff8000331ad80}
Probably caused by : memory_corruption ( nt!MiFindNodeOrParent+0 )
Followup: MachineOwner
Code:
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff880111c9fe2, fffff880092ab520, 0}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1c5fe2 )
Followup: MachineOwner
Code:
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff96000087dd4, fffff88002a10ed0, 0}
Probably caused by : memory_corruption
Followup: memory_corruption
From a strict BSOD perspective, the memory corruption is more concerning than anything else. If there is a ram problem, it can cause a BSOD at any time doing any thing and whatever driver is most in use at the time will usually get the blame. So, from my perspective, if there is a memory problem, nothing in the dump files can be reliable. Let me show you. The second one today that blamed the Nvidia driver, when I dig down into the files, this is what it shows as the cause.

Code:
fffff880`092aa590  fffff880`00c87800Unable to load image \SystemRoot\system32\DRIVERS\amd_sata.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for amd_sata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_sata.sys
 amd_sata+0x1800
Code:
fffff880`092aa018  fffff880`04bea29eUnable to load image \SystemRoot\System32\Drivers\dump_amd_sata.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dump_amd_sata.sys
*** ERROR: Module load completed but symbols could not be loaded for dump_amd_sata.sys
Those are the causes of that dump and no where does it mention the Nvidia driver that was originally listed. There were some references to the Nvidia Display Driver, the NTFS file system the AMD sata, which are all mostly related to the hard drive. In all fairness the last one, dump_AMD_SATA is simply a way for the system to make room for the dump file to be written.
My System SpecsSystem Spec
Reply

 BSOD Various BCCodes 1a, d1, 24, 7e, 3b




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Two BSOD in one day. BCCodes: 3b and d1
When I played the sims late last year I started getting the 3b code. I don't use my desktop very often, but since I recently moved I have began to use it more. The other day it crashed while I was gone for less than a minute and then today it crashed twice within a couple of hours. A couple of...
BSOD Help and Support
BSOD Playing Warthunder, BCCodes 116 and D1 have been reported.
I have had Crashing issues with my computer as of two days ago while playing Warthunder. the original Crash report was a BCCode 116. I uninstalled warthunder then re-installed. re-installed my Graphics card Driver and disconnecting my second screen. After doing all that i started it up again...
BSOD Help and Support
Brand new build, BSoD with bccodes F4 and 7A
Hey all, this is my first time posting on the forums, so don't mind any bad etiquette. About 3 weeks ago I built myself a new computer for the first time. The installation went smoothly and everything worked perfectly fine. For the first two weeks, no errors in sight. I was playing games such as...
BSOD Help and Support
BSOD During Diablo 3. BCCodes such as "124, 50, 3b".
Hey guys. I'm running a new build I got about a month ago. I wanted to buy a new computer for D3 (needed a new one anyways), but I wasn't confident to build a computer by myself. So the company I bought it off allowed me to choose the parts and they would build it and test it for me provided I paid...
BSOD Help and Support
BSOD'ing with multiple BCCodes.
I've had my computer for over 2 years now, experiencing not that many problems. The last 2 weeks or so have been very hectic however. Started having problems with a bunch of different BCCodes. So I decided to format my computer. It seems like it's gotten progressively worse and am now at the...
BSOD Help and Support
BCCODEs; 1e, 1b, 1c, 24 etc
Hi guys, Having major issues with BSOD after installing the following two bits of hardware: Cisco Linksys Wireless-N PCI Adapter #WMP600N-EU WD 1TB 3.5" SATA-III 6Gb/s Caviar Black Hard Drive - 7200rpm 64MB Cache The wireless card is supposed to work on Win7 64bit, but I don't have...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App