Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on computer after motherboard upgrade

29 Dec 2014   #21
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, that's fine. But now you know how to get there and how to change it if you need to. Today wasn't a total loss. You learned something.


My System SpecsSystem Spec
.
29 Dec 2014   #22
Anthony07

windows 7 pro 64bit sp1
 
 

Thanks running long generic test right now says it will be like 2 and a half hours if you have anything else you see off the screen shots please let me know i will try to monitor forum
My System SpecsSystem Spec
29 Dec 2014   #23
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Enable driver verifier but first create a restore point. The link of how to create one is below. Then enable driver verifier. Sort the drivers by provider and enable all drivers NOT provided by Microsoft. Then use your computer any way you want and do anything you want to. It will seem kind of slow and sluggish. If there is anything that you do that usually causes a BSOD, do that often. Driver Verifier puts extra stress on the drivers, trying to make the computer crash. Hopefully, the driver causing problems will be caught. Keep it on for 24 hours of actual use. Again, there are no restrictions on what you can do. Run it as hard as you want. But, do keep an eye on the CPU temps.

warning   Warning
Be sure to create a Systm Restore point before proceeding further System Restore Point - Create


Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
information   Information

What is Driver Verifier:
It puts stress on the drivers, and tries to make the faulty driver crash the computer. It is designed this way, to attempt to trap the offending driver.


What you will notice:
It will tend to make the computer rather slow and sluggish because the drivers are being stressed.
warning   Warning

Before enabling DV, make sure you have created a system restore point before enabling Driver Verifier. make a System Restore Point manually before enabling DV.


Tip   Tip




Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
.

29 Dec 2014   #24
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

The screen shots look OK. I will just wait until you find the results of the test. After that we will enable Driver Verifier, but wait for the test to finish.
My System SpecsSystem Spec
29 Dec 2014   #25
Anthony07

windows 7 pro 64bit sp1
 
 
Driver verifier

Now that you bring that up i was looking at other posts and seen to try driver verifier so i did but now that i think about it i might still have that running i dont remember shutting it off is there any way to check if it is still running if it is i will restart it
My System SpecsSystem Spec
29 Dec 2014   #26
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

The link in the post tells you how to enable or disable it Driver Verifier - Enable and Disable
My System SpecsSystem Spec
29 Dec 2014   #27
Anthony07

windows 7 pro 64bit sp1
 
 

Thanks
My System SpecsSystem Spec
29 Dec 2014   #28
Anthony07

windows 7 pro 64bit sp1
 
 
verifier bsod

ok so enabled verifier blue screened upon reboot until i went to safe mode and disabled here is the dmp file
My System SpecsSystem Spec
29 Dec 2014   #29
Anthony07

windows 7 pro 64bit sp1
 
 

enabled it a second time same thing bsod when booing windows here is dmp file from that
My System SpecsSystem Spec
29 Dec 2014   #30
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Here is the first BSOD

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck C4, {e1, fffff9800149efb8, 0, 0}
*** WARNING: Unable to verify timestamp for GUBootStartup.sys
*** ERROR: Module load completed but symbols could not be loaded for GUBootStartup.sys
Probably caused by : GUBootStartup.sys ( GUBootStartup+103c )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught.  This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 00000000000000e1, Synchronization object address is bogus or pageable.
Arg2: fffff9800149efb8, Synchronization object address.
Arg3: 0000000000000000
Arg4: 0000000000000000
That is GlarySoft - Glary Utilities Startup Manager Tool driver
My System SpecsSystem Spec
Reply

 BSOD on computer after motherboard upgrade




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD After Fresh Windows 7 Install, Motherboard Upgrade
Hi. I just recently bought an AMD FX-9590 CPU and come to find out my old motherboard didn't support it. I've upgraded to a Gigabyte 990FXA-UD5 from an ASUS M4A78T-E. After a fresh install of Windows 7, I continually get an F4 and 7A error code BSOD. Main Drive is 107GB OCZ-VERTEX2 3.5 ATA...
BSOD Help and Support
BSOD while randomly using computer after replacing motherboard + CPU
Greetings, Thanks for having me. I want to ask for help on a random BSOD experience I am having with my computer. I am quite frustrated after replacing my motherboard and CPU since I'm experiencing random BSOD's now 3-5 times per week. My old motherboard (a Z87) was RMA'd so I figured I...
BSOD Help and Support
Win 7 Motherboard Upgrade - OEM Licence help
Hey there, I got this PC a year or so ago, and I am about to upgrade the Motherboard, CPU and RAM for it. I've read around that my previous OEM licence (That I've used every time I've needed to do a fresh install on this PC and worked fine) will no longer work with the new motherboard. I...
Windows Updates & Activation
BSOD when pc booting recent upgrade of motherboard and cpu
Evening all, Desperate for some help just upgraded my pc componants and now it will not start at all. As far as i can see all the bios settings are correct. On first start up a message come up first saying no disks found, then when i click onto the bios menu i have AHCI mode enabled and it...
Hardware & Devices
Upgrade motherboard without reinstalling OS help?
I've just bought a new motherboard and hooked it all up but it can't boot and restarts everytime I turn it on. How can I get my PC to work without having to reinstall Windows?
Hardware & Devices
Motherboard and CPU Upgrade Options
Hey everyone, as you may already know that i had a previous thread (http://www.sevenforums.com/hardware-devices/74208-windows-7-ultimate-64-bit-motherboard-cpu-upgrade.html) asking which i should upgrade. I want to be upgrading the motherboard and the CPU, i need options on which i should upgrade...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App