Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Regular BSOD, was from ntoskrnl.exe, now ntfs.sys

07 Mar 2015   #21
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If it was the slot, yes a new motherboard would be necessary. How are you sure you removed the bad stick. I don't know where this other person saw that you had 2 errors in 6 passes. You had 1150 errors before pass 1 was complete. Also, did you download memtest86+ from the link I gave you? I ask because you are showing 2 screenshots in post #7. One shows Version 1.00 and the other shows version 2.11. I can't find version 1.00 on the page I linked to. You need to run either 5.01 or 4.20. 4.20 would probably be best in your case, but 5.01 is good too. If you use 5.01 in the beginning it will tell you to press a button if you have a multi core CPU. Don't press anything, the test will start in a couple of seconds. Each pass consists of 10 tests. Each pass tests something different and each test tests a different thing. So, 8 passes is needed to completely test your ram, unless you get an error. If you get an error, stop the test. The only way to know which stick it is, would be to run each stick in each slot. Here are the instructions again:
Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask


Also, do you have a desktop or a laptop? Your system specs say a desktop but the Motherboard you list is for a laptop from Ibutpower. It is actually a Clevo.

All of your dump files list the same thing,

Code:
fffff880`02824038  fffff880`03e29be3Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
 igdkmd64+0x1eabe3
Code:
igdkmd64
start             end                 module name
fffff880`03c3f000 fffff880`03ffe000   igdkmd64 T (no symbols)           
    Loaded symbol image file: igdkmd64.sys
    Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
    Image name: igdkmd64.sys
    Timestamp:        Fri Sep 26 08:42:04 2014 (54256D2C)
    CheckSum:         003B14CE
    ImageSize:        003BF000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Intel Graphics from your CPU. Do you have Optimus (switchable graphics)? In the meantime please make sure both your SSDs have the latest Firmware, and please run Check Disk Disk Check . If you have a tool box with either one or both of them, please run it to determine the drive's health. Also, please run these online scanners

Scan with Kaspersky TDSSKiller:
Anti-rootkit utility TDSSKiller
Anti-rootkit utility TDSSKiller
ESET online scanner:
Free Virus Scan | Online Virus Scanner from ESET
Free Online Virus Scanner | ESET

Please download and install Superantispyware (SUPERAntiSpyware | Remove Malware | Remove Spyware - AntiMalware, AntiSpyware, AntiAdware!). Use the free version and run a complete scan. It is a very good program, for what it does and the free version is all you will need, if you can stand the ads to purchase it.


My System SpecsSystem Spec
.
07 Mar 2015   #22
ForgedSalvation

Alabama
 
 

the two screen shots were examples that the other person was using to show me what i was looking for. i have been using memtest86+-5.01
and i ran each of my four sticks individually until it said that they had passed and i could press esc to leave memtest
My System SpecsSystem Spec
08 Mar 2015   #23
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, thanks.
My System SpecsSystem Spec
.

Reply

 Regular BSOD, was from ntoskrnl.exe, now ntfs.sys




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys
Hi, to make things easier for you,below is the Bug Check String, Driver, and crash address SYSTEM_SERVICE_EXCEPTION___dxgmms1.sys___ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT_______ntoskrnl.exe____ntoskrnl.exe+75bc0 SYSTEM_SERVICE_EXCEPTION___ntoskrnl.exe____ntoskrnl.exe+75bc0...
BSOD Help and Support
Regular BSOD with NTFS.sys with windows 7 x64 clean install
Hello, I would like to ask if anybody knows how to fix the following issue: I have performed a clean install of windows 7 x64. My PC was performing fine but after about a week it started giving me regular BSOD with the descritpion ntfs.sys. I have tried fixing the disks using chkdsk /R...
BSOD Help and Support
BSOD ntoskrnl.exe and NTFS.sys
I recently formatted and did a full clean install of Windows 7 because of BSOD trouble, and now it is back to haunt me. For that reason, I think it is a hardware issue. I attached the 7 forum diagnostic tool report. Please help
BSOD Help and Support
BSOD - ntoskrnl.exe and ntfs.sys
Hello, I am having BSOD randomly and it can occur even when I am not doing anything. I am using a toshiba satellite laptop and run on an ssd vertex3 ocz operating on windows 7 ultimate. There are two different stop codes, the one that occurs most frequently is 0x000000f4 and the other is...
BSOD Help and Support
Regular BSOD , ntfs.sys common
Ok this is my third attempt at writing a thread about my BSODS before being rudely interrupted by said BSODS :cry: so i'll keep it short for now and exapand in between resets. Regular BSOD, usually within one hour of reboot. No specific task causing it (anything really, browsing net, playing...
BSOD Help and Support
Regular BSOD's, caused by ntoskrnl.exe?
Hello, I have installed Windows 7 Home premium x64 on a system I built myself, and keep getting regular bluescreens. When I looked at the dumps with Bluescreenview, it always has ntoskrnl.exe highlighted in red. Help please?
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App