BSOD when watching videos on laptop


  1. zeldalink
    Posts : 1
    Windows 7 Ultimate x64
       New #1

    BSOD when watching videos on laptop


    Hello, everybody!
    I've had a BSOD just a while ago when I was watching clips online and offline using Media Classic at the same time. Here's what I get from debugging the dump file:

    Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\Windows\Minidump\123014-47346-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path. *
    * Use .symfix to have the debugger choose a symbol path. *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Machine Name:
    Kernel base = 0xfffff800`0300f000 PsLoadedModuleList = 0xfffff800`03254e90
    Debug session time: Tue Dec 30 11:11:02.169 2014 (UTC + 7:00)
    System Uptime: 0 days 4:17:12.636
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    * *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ..........................................
    Loading User Symbols
    Loading unloaded module list
    ......
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck D1, {fffff98013588e60, 2, 0, fffff88008dca0e9}

    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    Unable to load image L1C62x64.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for L1C62x64.sys
    *** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    *************************************************************************
    *** ***
    *** ***
    *** Your debugger is not using the correct symbols ***
    *** ***
    *** In order for this command to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** ***
    *** Type referenced: nt!_KPRCB ***
    *** ***
    *************************************************************************
    Probably caused by : L1C62x64.sys ( L1C62x64+70e9 )

    Followup: MachineOwner
    ---------

    Can anyone tell me what should be done? Thank you in advance.

    Also, English is not my mother tongue so please don't criticize me heavily if I make mistakes in grammar and spelling.
      My Computer
    Quote Quote

  3. koolkat77
    Posts : 15,026
    Windows 10 Home 64Bit
       New #2

    Code:
    Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\Compressed\USER-PC-30_12_14_132928,92\123014-47346-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`0300f000 PsLoadedModuleList = 0xfffff800`03254e90
Debug session time: Tue Dec 30 10:11:02.169 2014 (UTC + 6:00)
System Uptime: 0 days 4:17:12.636
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff98013588e60, 2, 0, fffff88008dca0e9}

*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
Probably caused by : L1C62x64.sys ( L1C62x64+70e9 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff98013588e60, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88008dca0e9, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032c00e8
GetUlongFromAddress: unable to read from fffff800032c0198
 fffff98013588e60 

CURRENT_IRQL:  2

FAULTING_IP: 
L1C62x64+70e9
fffff880`08dca0e9 4d8b36          mov     r14,qword ptr [r14]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  chrome.exe

TRAP_FRAME:  fffff8800bf6d1a0 -- (.trap 0xfffff8800bf6d1a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000282
rdx=fffffa80059e2e01 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88008dca0e9 rsp=fffff8800bf6d330 rbp=fffff98002eb4fb0
 r8=0000000000000000  r9=0000000000000000 r10=fffff800035404c0
r11=fffffa80047c72d0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
L1C62x64+0x70e9:
fffff880`08dca0e9 4d8b36          mov     r14,qword ptr [r14] ds:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff8000308ebe9 to fffff8000308f640

STACK_TEXT:  
fffff880`0bf6d058 fffff800`0308ebe9 : 00000000`0000000a fffff980`13588e60 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`0bf6d060 fffff800`0308d860 : fffffa80`03af0c30 fffffa80`0497fd00 00000000`00000000 fffffa80`06428a20 : nt!KiBugCheckDispatch+0x69
fffff880`0bf6d1a0 fffff880`08dca0e9 : fffffa80`059ad1a0 fffffa80`06428a20 fffff980`02eb4fb0 fffff980`02eb4fb0 : nt!KiPageFault+0x260
fffff880`0bf6d330 fffffa80`059ad1a0 : fffffa80`06428a20 fffff980`02eb4fb0 fffff980`02eb4fb0 fffffa80`06495780 : L1C62x64+0x70e9
fffff880`0bf6d338 fffffa80`06428a20 : fffff980`02eb4fb0 fffff980`02eb4fb0 fffffa80`06495780 fffff880`000001c0 : 0xfffffa80`059ad1a0
fffff880`0bf6d340 fffff980`02eb4fb0 : fffff980`02eb4fb0 fffffa80`06495780 fffff880`000001c0 00000000`00000000 : 0xfffffa80`06428a20
fffff880`0bf6d348 fffff980`02eb4fb0 : fffffa80`06495780 fffff880`000001c0 00000000`00000000 00000000`00000000 : 0xfffff980`02eb4fb0
fffff880`0bf6d350 fffffa80`06495780 : fffff880`000001c0 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffff980`02eb4fb0
fffff880`0bf6d358 fffff880`000001c0 : 00000000`00000000 00000000`00000000 00000000`00000000 fffff980`13588e60 : 0xfffffa80`06495780
fffff880`0bf6d360 00000000`00000000 : 00000000`00000000 00000000`00000000 fffff980`13588e60 fffff980`13588d30 : 0xfffff880`000001c0


STACK_COMMAND:  kb

FOLLOWUP_IP: 
L1C62x64+70e9
fffff880`08dca0e9 4d8b36          mov     r14,qword ptr [r14]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  L1C62x64+70e9

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: L1C62x64

IMAGE_NAME:  L1C62x64.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  51e4eeac

FAILURE_BUCKET_ID:  X64_0xD1_L1C62x64+70e9

BUCKET_ID:  X64_0xD1_L1C62x64+70e9

Followup: MachineOwner
---------

2: kd> lmvm L1C62x64
start             end                 module name
fffff880`08dc3000 fffff880`08de5000   L1C62x64 T (no symbols)           
    Loaded symbol image file: L1C62x64.sys
    Image path: L1C62x64.sys
    Image name: L1C62x64.sys
    Timestamp:        Tue Jul 16 12:56:44 2013 (51E4EEAC)
    CheckSum:         0002912C
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    MSINFO32:

    • Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter.
    • Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
    • Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
      My Computer
    Quote Quote

 

  Related Discussions
BSOD When watching videos
in BSOD Help and Support

Hi folks. I get a blue screen of death when watching , seems to be flash videos on youtube and so on. If someone could help me out with these dump files that would be greatly appreciated. Thanks for your time, Jeff.
BSOD mostly watching videos
in BSOD Help and Support

Hello It's been happening over the last few weeks, usually once every 3-4 days.Today, it happened twice. I've tried identifying the problem through WhoCrashed, but it's come to my attention it can be somewhat inaccurate. I've also tried the good old format approach, to no avail. What I've...
Hi all, Im new here, and I hear this is the best place to get help with my current issue. Recently I installed beta drivers from amd (14.6) and whenever I watch videos on you tube or facebook I get a bluescreen shortly after. It goes so quick that I cant really read what the problem is, but...
I've had this for a yea now. Still haven't found anything that will help me. When I watch vine or when I would go to buy a steam game, the video that pops up gives me BSOD. So I always have to buy my games through Windows Safe Mode. The error I get is the following: Stop: 0x000000000116 (I...
Hi: I've been experiencing a problem with my laptop that has me baffled. Whenever I watch a video on YouTube or any other website, it will initially play fine for a couple of minutes and then will start to really slow down. When this happens my whole system slows completely down and I have to...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 03:20.
Find Us