Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs at random times

03 Jan 2015   #1
lomlobon

Windows 7 Ultimate x64
 
 
Random BSODs at random times

For the last few months I have been having strange stop errors. First they only appeared a few minutes after I started my computer for the first time that day, with many different error codes. After a couple of months of trying different solutions, testing my RAM, installing drivers, flashing BIOS etc. I figured it might be one of my hard drives acting up, and I removed my oldest couple. Since then my computer has been working fine, but today I had two BSODs in a row, with "The video memory manager has encountered a fatal error" and "fltmgr.sys".

Some other random error codes I've encountered:
Memory management
Page fault in non paged area
Bad pool caller
Driver irql not less than or equal

Also, most of the times my BSOD error dump stops at 95, and claims to be completed, but I don't receive a minidump file like when it reaches 100. Sometimes it keeps retrying, and stopping at 95.

Operating System
Windows 7 Ultimate 64-bit SP1
CPU
AMD FX-8150 37 °C
Zambezi 32nm Technology
RAM
8,00GB Dual-Channel DDR3 @ 669MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co., Ltd. 970A-UD3 (CPU 1) 32 °C
Graphics
BenQ G2420HD (1920x1080@60Hz)
2048MB ATI AMD Radeon HD 7800 Series (XFX Pine Group) 39 °C
Hard Drives
119GB M4-CT128M4SSD2 ATA Device (SSD)
932GB Western Digital WDC WD1002FAEX-00Z3A0 ATA Device (SATA) 38 °C
466GB Western Digital WDC WD5000AADS-00S9B0 ATA Device (SATA) 32 °C
Optical Drives
DTSOFT Virtual CdRom Device
TSSTcorp CDDVDW SH-224BB ATA Device
Audio
AMD High Definition Audio Device

I'm attaching my dump files from since a few months ago.


My System SpecsSystem Spec
.
04 Jan 2015   #2
lomlobon

Windows 7 Ultimate x64
 
 

bump
My System SpecsSystem Spec
04 Jan 2015   #3
lomlobon

Windows 7 Ultimate x64
 
 

bump
My System SpecsSystem Spec
.

06 Jan 2015   #4
lomlobon

Windows 7 Ultimate x64
 
 

bump
My System SpecsSystem Spec
07 Jan 2015   #5
lomlobon

Windows 7 Ultimate x64
 
 

So I disconnected my extra hard drives, and my computer run fine until today, where I got three BSoDs in a row. First one was a couple of minutes after startup, before I did anything, and the other two times the BSoDs happened while watching a stream and playing a game at the same time. This time I got dump files two times, but the third time the memory dump meter in the blue screen stopped at 95% and claimed to be complete. The given error was "Attempted to write read only memory", but with no responsible file. I run WhoCrashed and got this for the other two:

On Wed 2015-01-07 10:10:00 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x1A (0x61940, 0x771A6000, 0x81B0000068757800, 0x0)
Error: MEMORY_MANAGEMENT
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Wed 2015-01-07 09:18:35 GMT your computer crashed
crash dump file: C:\Windows\Minidump\010715-21278-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x1A (0x5003, 0xFFFFF70001080000, 0x214E, 0x215000004200)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

Could it be faulty RAM, bad drivers, or a hard drive error? I have updated windows and all my drivers, checked my hard drives with both crystaldiskinfo, SSDlife and chkdsk. I tested my RAM a couple of passes, but I might do it for longer. Malwarebytes, MSE, TDSSkiller finds no problems, and I have cleaned my registry with cCleaner.

Thank you in advance.
My System SpecsSystem Spec
07 Jan 2015   #6
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

My System SpecsSystem Spec
07 Jan 2015   #7
lomlobon

Windows 7 Ultimate x64
 
 

Here it is.
My System SpecsSystem Spec
07 Jan 2015   #8
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {3, 2, 1, fffff88000c0923b}

Probably caused by : ataport.SYS ( ataport!IdeCommonCrbCompletion+37 )

Followup: MachineOwner
---------
Code:
DAEMON Tools Pro Agent	"e:\daemon tools pro\dtagent.exe" -autorun	Thorium\Admin	HKU\S-1-5-21-3355112765-2709188055-1015778514-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
DAEMON Tools uses the sptd.sys driver, a well-documented cause of BSOD's - uninstall it.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {5003, fffff70001080000, 214e, 215000004200}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+45f7d )

Followup: MachineOwner
---------
Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Reference this tutorial to help you use MemTest86+:
RAM - Test with Memtest86+

Please perform the following:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the tool here in your next reply
My System SpecsSystem Spec
08 Jan 2015   #9
lomlobon

Windows 7 Ultimate x64
 
 

Memtest86 reported errors after I left it on overnight, so I removed the RAM from slot 3 and tried again, with no problems found with the other stick. My system seems stable so far running of a single 4GB stick of RAM, with no crashes at least so far, so I assume that stick or the slot must have gone bad. I'll just have to test slot 3 when I decide to buy new RAM.
Many thanks for your assistance!
My System SpecsSystem Spec
08 Jan 2015   #10
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

My System SpecsSystem Spec
Reply

 Random BSODs at random times




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODs, Random times, random error messages.
Hi all, first off, thanks for reading this. Basically, my current build is about 2-3 years old, the newest thing being my PSU (which I replaced after several issues with the GPU drivers constantly crashing, turns out it wasn't the power anyway...) For the past few weeks, I've been having...
BSOD Help and Support
Random BSODs at various times
So I've been getting bsods with different messages each time a various intervals. Sometimes it can work fine for the whole day and sometimes 3 bsods in a 10 min time frame. I've tried a clean install couple months back, but that didn't seem to do the trick =( CPU: AMD II X6 1055T MB: ASUS...
BSOD Help and Support
BSODs at Random Times and Low WEI
- Windows 7 Home Premium 64bit - Original OS is on the system - OEM: Came pre-installed on custom build - Age of system and OS installation: 14 months. Windows 7 gives frequent BSODs at seemingly random times, but often when mutiple programs are being used, such as IE & Open Office &...
BSOD Help and Support
BSODs at random times
I have a 2.5 year old Dell XPS M1530 running Windows 7 Professional (x86). Vista came pre-installed and I installed my current OS a little over a year ago, and have never re-installed it.
BSOD Help and Support
Random BSODS at Random Times - Please Help
Hello everyone and thank you for taking the time to read a newbie's post. Anyways, I'm having a really frustrating problem. Symptoms: - Random BSODs happening at random time intervals from bootup Example: Bootup, and after 5 minutes, BSOD. Bootup again, and after 30 minutes, BSOD....
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App