Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Lots off BSOD like 0x3b,0x24,0x1a,0X7e,0x50 etc

03 Jan 2015   #1
Murmulis8

windows 7 professional 64bit
 
 
Lots off BSOD like 0x3b,0x24,0x1a,0X7e,0x50 etc

Attachment 345181
Started with no reason.. week before i updated graphics card driver. When i ran Memtest86, its shows lots of errors. Is it RAM false and why it started? Thanks to all before!


My System SpecsSystem Spec
.
04 Jan 2015   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Murmulis8 View Post
Attachment 345181
Started with no reason.. week before i updated graphics card driver. When i ran Memtest86, its shows lots of errors. Is it RAM false and why it started? Thanks to all before!
Now follow the "Part 3: If You Have Errors:" of How to Test and Diagnose RAM Issues with Memtest86+

Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:
testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.

Why it started? Hardware fails, like anything else.
My System SpecsSystem Spec
04 Jan 2015   #3
Murmulis8

windows 7 professional 64bit
 
 

I have only one stick 4gb , I replaced it, but nothing changed. Hope there is no motherboard both slots fault Thank you very much, now i will buy new RAM and everything will be ok! Good luck, Archie!
My System SpecsSystem Spec
.

04 Jan 2015   #4
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

I would highly recommend buying two sticks of ram in a matched pair.
Your motherboard has to ram slots. In order for your system to run dual channel you will need both slots filled.

ASRock > H61M-VG3


- Dual Channel DDR3 memory technology
- 2 x DDR3 DIMM slots
- Supports DDR3 1600/1333/1066 non-ECC, un-buffered memory
- Max. capacity of system memory: 16GB*
- Supports Intel® Extreme Memory Profile (XMP) 1.3 / 1.2 with Intel® Ivy Bridge CPU
My System SpecsSystem Spec
04 Jan 2015   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Murmulis8 View Post
I have only one stick 4gb , I replaced it, but nothing changed. Hope there is no motherboard both slots fault Thank you very much, now i will buy new RAM and everything will be ok! Good luck, Archie!
Note the post #4 by Layback Bear. As your motherboard has two DIMM slots, better you get a kit (pair) or RAM.

As the errors are coming in both the slots, most likely it is the error form the RAM stick, not the DIMM slot. But we will know it better after replacing the failing RAM.
My System SpecsSystem Spec
Reply

 Lots off BSOD like 0x3b,0x24,0x1a,0X7e,0x50 etc




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Multiple BSOD 0x0a, 0x1a, 0x4e, 0x50, 0x3b (IRQL, SYS_SERV_EXC, etc)
Hi, I have a Dell Optiplex 9020 Lab with about 30 computers in there. The computers are running Windows 7 64 bit. There is one computer that has about 5 different types of bluescreens happening over the last few months. I attached a SF Diag Tool Zip. Any help on what could be the problem? I...
BSOD Help and Support
BSOD playing Aion, error 0x50, 0x3b and 0x1a
Hi Win7 Forum! My girlfriend has been having problems with her newly bought (previously used though) computer. She's gotten two BSOD while playing Aion. Both of them occurring after only a couple of minutes of gaming. Minidump also shows two other BSOD registered (first two) that she hasn't...
BSOD Help and Support
Multiple BSODs per month (0x3B, 0X50, 0X24)
Over the past couple of months I have been getting blue screens a few times a week. Attached I have a screenshot from bluescreenview as well as details on each of the minidumps. Any suggestions on what could be causing the varying BSODs? Is it likely a hardware or software issue? Things I have...
BSOD Help and Support
Random BSOD, 0x50, 0xd1 0x7e, 0x3b
This is a long story. In July my Dell 1557 started randomly crashing with multiple BSOD, I gave up on it and Bought a Sony Vaio F23. It is now doing the same. I Upgraded the laptop with a Crucial M4 128gb SSD and 4GB Kingston SODIMM I have had a few BSOD's so i removed the SSD. ...
BSOD Help and Support
BSOD on newly built PC (0x24, 0x7E, 0x1A)
I have been facing this problem ever since I first assembled my pc. I am not an expert but I don't think I have messed my hardware. The PC is 10 days old. I am not sure but maybe there is some sort of incompatibility with my hardware and Win7. I am currently running Win7 Ultimate x64. My pc spec...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 15:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App