Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD Memory Management - 0x1A

13 Jan 2015   #1
Archetype

Windows 7 Pro x64
 
 
Random BSOD Memory Management - 0x1A

So we hashed out an issue with my G19 keyboard causing 0xC1 and other BSOD's (0xC1 SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION on new build) last week and the week before... Thank you Golden! I now have a new issue...

I am now receiving seemingly random 0x1A Memory Management BSOD's starting on 1/11/2015 (Everything before 1/11 is most likely linked to the keyboard). One started seemed to start on video playback on a website, the others seemed random.

Troubleshooting I have run both Win 7 Memory Diagnostic (Full Check) and Memtestx86+ (12 Hours and 10 Passes) and both came back clean.

Any ideas?


My System SpecsSystem Spec
.
13 Jan 2015   #2
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Follow:
1. Log in as administrator, open Windows Explorer and go to C:\Windows\Minidump
2. Delete all .dmp files in that folder
3. Run Driver Verifier as follows:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal, re-run the DM Log Collector, and upload the new ZIP file here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode
My System SpecsSystem Spec
13 Jan 2015   #3
Archetype

Windows 7 Pro x64
 
 

Thank you for the response and your assistance once again.

I enabled Driver Verifier and restarted. Immediately after login (No password set for testing) and desktop loading, I received the attached BSOD's with following BSOD.

The DMA Subsystem has detected an illegal DMA Operation

STOP: 0x000000E6

I rebooted and received the same BSOD and stop code.
My System SpecsSystem Spec
.

13 Jan 2015   #4
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck E6, {f, 2, 38, fffff88003d18fc0}

Probably caused by : SCSIPORT.SYS ( SCSIPORT!SpProcessCompletedRequest+341 )

Followup: MachineOwner
---------

7: kd> lmvm rr26xx
start             end                 module name
fffff880`0106a000 fffff880`010ab000   rr26xx     (deferred)             
    Image path: \SystemRoot\system32\drivers\rr26xx.sys
    Image name: rr26xx.sys
    Timestamp:        Thu Jul 31 16:45:52 2008 (489166A8)
    CheckSum:         0003007A
    ImageSize:        00041000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
Name	RocketRAID 2640X4 SAS Controller
Manufacturer	HighPoint
Status	OK
PNP Device ID	PCI\VEN_1103&DEV_2640&SUBSYS_00041103&REV_02\4&14144E6&0&00E4
I/O Port	0x0000C000-0x0000C07F
Memory Address	0xF7140000-0xF7140FFF
IRQ Channel	IRQ 16
Driver	c:\windows\system32\drivers\rr26xx.sys (1.0.8.731, 181.03 KB (185,376 bytes), 7/31/2008 12:16 AM)
Im just guessing here since the only ISCSI device is the RocketRaid Controller......try updating the driver. Use system as normal - do not run Driver Verifier again - and lets see if we get another BSOD.
My System SpecsSystem Spec
14 Jan 2015   #5
Archetype

Windows 7 Pro x64
 
 

I have updated the RR 2640X drivers. Strange thing as I had downloaded them during initial setup and was pretty sure I installed them. I may have removed the new drivers after my array dropped offline and I uninstalled and rebooted.

I restarted and was about to disable Verifier (I missed the Safe boot option) when I received a BSOD linked to Asus drivers which I then proceeded to uninstall and restart. I will close this out and start a new thread if I receive a different BSOD.

Thanks again Golden!
My System SpecsSystem Spec
Reply

 Random BSOD Memory Management - 0x1A




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD, Ati problem? (Memory Management)
Hello, I've been expierencing a lot of trouble with my pc. It's giving BSOD's at random moments. It seems to be caused by the ati driver, but i cant solve the problem. I've tried installing new drivers for almost everything but the problem still exists. I've attached some of the dump files. I had...
BSOD Help and Support
BSOD League Of Legends, Memory management error 0X1a
Heya, As the title states: I get BSOD when i'm doing anything with LoL, I have reinstalled a clean OS, and downloaded/installed the game. After that I finished installing the drivers and now LoL cant seem to play a game, it will run but I will BSOD as soon as the game starts. I have...
BSOD Help and Support
BSOD of few random error, Memory Management.
I have the dump files and all the details attached. Please help. Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030) Language: English (Regional Setting: English) System Manufacturer: Gigabyte Technology Co., Ltd. ...
BSOD Help and Support
Random Memory Management BSOD
Hi guys Over the last month or so, I am constantly getting Memory management BSOD's. I have swapped the RAM with a known working set, and it seems to still happen. It happens at random times (it could do it loading a game, then work fine while playing the game. It just did it a minute ago trying...
BSOD Help and Support
Random BSOD Something about memory management
Hi all, I started to get random BSODs, usually after a few hours after turning on my PC. The only major change I made was a firmware upgrade to my Asus P8Z68-V Pro MB to the latest iteration: 3203 released Feb 21/12. Recently my website got hacked via ftp password breach but I ran a full...
BSOD Help and Support
BSOD memory management 0x1A
Hello, i'm new to the forums! Anyways, I had this BSOD just recently. The blue screen usually occurs randomly after a cold boot. It sometimes BSOD on the first restart boot. On the second restart boot, the computer runs fine with no BSOD. (Here are my computer specs) Intel i7 950 3.06 (OC to...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:22.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App