Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - Not sure of issue, DM log fire attached

24 Jan 2015   #21
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by ZhadowZ View Post
Hard Test stopped again, 43%.

I cannot seem to get it to finish. I started it and left for dinner and came home to it froze on 43 with the same problem as posted in the picture above.
The picture of Seatools Long Generic test uploaded in post #15 is not showing any error per se. It is frozen at a particular point because it is trying to recover/remove any disc error it found during testing. Give it some time. Long test may need a good time to be completed, sometimes over a few hours depending on the disc size.

If the test detects any error, the screen it will show is this ....

If the test progress bar is apparently frozen, but not showing either a "passed" or a "failure", please have patience with the test.


My System SpecsSystem Spec
.
24 Jan 2015   #22
ZhadowZ

Windows 7 64bit
 
 

I am not sure you are seeing the picture right that I posted Arc, because the first time I ran this test it took about 5-10 minutes to get to 25% and then did what it did.

When it froze on the 50%, I actually had started it, and then went to sleep for about 5-6 hours. And woke up for work disappointed that it had done it again.

I posted the picture, again and zoomed in a bit on where the problem occurs.

Have you ever see the Matrix? Thats what it looks like at the top of the screen.
My System SpecsSystem Spec
24 Jan 2015   #23
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

No, I have never seen those messages on top. I cannot read it, mate. Can you please write it down for us?

Only one thing can be said from that pic that LBA (bad sector count) is too high at 25% only.
My System SpecsSystem Spec
.

24 Jan 2015   #24
ZhadowZ

Windows 7 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
No, I have never seen those messages on top. I cannot read it, mate. Can you please write it down for us?

Only one thing can be said from that pic that LBA (bad sector count) is too high at 25% only.
I tried to run it additionally last night, and it made it to 77%. With the same error coding. Which by the way is a bunch of jumbo wumbo its like random letters/numbers and symbols. Really strange.

I ran it again, just recently. And it finished. And it passed.

What I don't understand is why I had to run it 5-6 times (cant remember) for it to finally complete the full test. I have not had a BSOD for I believe 2 days going on the 3rd.

I will see if another one happens in the next week or so. I am trying to figure this all out before I purchase my new CPU/GPU incase I end up needing to replace something else.
My System SpecsSystem Spec
31 Jan 2015   #25
ZhadowZ

Windows 7 64bit
 
 

So all was well, no more BSODs. Until last night, I had two.
My System SpecsSystem Spec
31 Jan 2015   #26
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

0x124's are typically related to a hardware issue and can only be isolated by stress testing the major components.

If overclocking, reset all overclocks back to their default settings and then follow these:

RAM - run for a minimum of 8 consecutive passes
RAM - Test with Memtest86+

CPU - run the HIGH test
CPU - Stress Test Using IntelBurnTest

Video - run the FURMARK test for 20mins
Graphics Card Problems - Diagnose
Video Card - Stress Test with Furmark

Storage - run the SHORT test using the DOS version
SeaTools for DOS and Windows - How to Use
My System SpecsSystem Spec
01 Feb 2015   #27
ZhadowZ

Windows 7 64bit
 
 

Ran the GPU test - No problems at all, ran it for 30 minutes or so. Temps never exceeded 52, and that was only for a short while, maintained about 40-45 about 90% of it. (Log attached)

Storage- I have already ran Basic, Short, and Long test with Seatools. All passed.

CPU - Whilst running it, I BSOD'd. But, I noticed the messages were different. (Photos attached)

Ram - I will run this when I can, currently do not have access to CD burner or USB.
My System SpecsSystem Spec
03 Feb 2015   #28
ZhadowZ

Windows 7 64bit
 
 

Is the fact that my PC BSOD'd while doing the CPU test mean its my CPU?
But the "STOP" code was different.
My System SpecsSystem Spec
03 Feb 2015   #29
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

What temperature did the CPU reach?
My System SpecsSystem Spec
03 Feb 2015   #30
ZhadowZ

Windows 7 64bit
 
 

Probably horrible on my computer but I ran it again and logged it.

I was not able to upload it in Microsoft Excel like it wanted too, so I cropped the Temps.

Here is the log, it seems it hit about 62 and the end of the log is because it BSOD'd.
I have noticed as well my PC only crashes whilst playing H1Z1 and Dota 2, which are 2 very CPU demanding games because of the horrible Engines they run on.

What I don't understand is, I have an Cooler Master 212 Evo CPU Fan, I wouldn't think my PC would hit those kind of temps?
My System SpecsSystem Spec
Reply

 BSOD - Not sure of issue, DM log fire attached




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
OneDrive: Now available for Kindle Fire and Fire phone
Source: OneDrive on all of your devices. Now available for Kindle Fire and Fire phone
News
BSOD while playing Mount and Blade with Fire and Sword
May anyone please tell me why I get a BlueScreen. This is what the computer showed me on reboot - Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 18441 Additional information about the problem: BCCode: 116 BCP1: FFFFFA8004096440
BSOD Help and Support
Help, I'm taking heavy fire from BSOD's
As thread name says, I'm under heavy fire from BSOD's. The error messages appear to be random, as they change around a lot. I installed the OS about 1 month ago, and things have been bad ever since. I am running Windows 7 professional, x64, retailed version. These are my system specs: ...
BSOD Help and Support
Windows 7 BSOD Issue, .dmp attached
Ever since I installed Windows 7 64 Bit Professional my computer has randomly shut down but its always right after sleep/hibernate mode. The Event viewer gave me this message: Log Name: System Source: BugCheck Event ID: 1001 Level: Error OpCode: Info Logged: 1/9/2010 3:01:44 PM Task...
BSOD Help and Support
Fire fox issue
Hi i have been using firefox for a few months now. I have noticed it does nto work properly. When i say this i mean when i close down firefox and load it back up i always have to go in task manager and end the process. This gets highley annoying. Another issue which i have encounted is when i...
Browsers & Mail
Fire Fox 3.5 issue
I ahd the same problem with FF 3.10 Had hoped they would iron this out. Problem-Help-update is grayed out. There must be a way around this issue by now. I've posted in the Mozilla forums but no one seems to know there. All say try running in Admin mode. Well that does not work and even if it did...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App