Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod driver_power_state_failure

19 Jan 2015   #1
snelgin

Window 7 Premium 64 bit
 
 
Bsod driver_power_state_failure

I have been receiving the following error for over a year now. I have been unable to fix it. I am hoping that someone on this forum can assist. It happens whenever the computer goes into sleep mode.

Attached hopefully is the necessary information.

Thanks.


My System SpecsSystem Spec
.
20 Jan 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, snelgin welcome to Seven Forums. I will try to help you with your problem. The only dump file you have lists

Code:
use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa80079bda10, fffff80000b9a518, fffffa800b082780}
Probably caused by : pci.sys
Followup: MachineOwner
Which is most likely your Hard drive. However further looking shows


Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80079bda10, Physical Device Object of the stack
Arg3: fffff80000b9a518, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa800b082780, The blocked IRP
Code:
Irp is active with 3 stacks 2 is current (= 0xfffffa800b082898)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    
   Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 fffffa8009170050 00000000 fffff800036cd210-fffffa800e657b50 Success Error Cancel pending
       *** WARNING: Unable to verify timestamp for k57nd60a.sys
*** ERROR: Module load completed but symbols could not be loaded for k57nd60a.sys
\Driver\k57nd60a nt!PopSystemIrpCompletion
   Args: 00015400 00000000 00000005 00000003
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa800e657b50    
   Args: 00000000 00000000 00000000 00000000
Which I am assuming was caused by k57nd60a which is your Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver

Please Go to Dell's web page and update all drivers you can, especially the Broadcom and chipset drivers.

Also please uninstall Dameon tools as it is a known cause of BSODs.
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause of BSOD's.

1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and follow these steps:
- Double click the executable to open it
- Click the button shown below



If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.
My System SpecsSystem Spec
Reply

 Bsod driver_power_state_failure




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Bsod driver_power_state_failure
Hi, My Samsung np530u3c started experiencing bsods after a deep sleep (basically, there are two modes of sleeping normal sleep deep sleep (if the system is idle for a long time). In this mode, a system does a sleep recovery. So, the problem is, somewhere there, when a laptop enters deepsleep...
BSOD Help and Support
Bsod driver_power_state_failure
Hello. I have been experiencing rather frequent BSOD over the last few days. The first few happened as I was transferring data from one HDD to the other. The latest one happened while clicking a link. That's when I got the Driver power state failure error message. Thanks for any help in advance. ...
BSOD Help and Support
BSOD: Driver_Power_State_Failure
Attached: VizulizeBSOD.zip (Dump Files and PERFMON Report) Hi there, I recently (about a week ago) reinstalled Windows 7 Professional 64 bit onto my computer (retail version), as I was not making good usage of my SSD boot drive. As far as I am aware, all of my drivers are fully up-to-date...
BSOD Help and Support
Bsod - driver_power_state_failure
Simplistically, similiar to others. . .I wanted to debug this myself, but when it came to figuring out the symbols and all. . .well, my patience can only go so far. narrowed down to conflict between the driver and after the computer comes back to life from sleep mode(it only BSODs after I...
BSOD Help and Support
Bsod: Driver_power_state_failure
Hi there, Last night, i set my PC to shut down at a pre-specified time, at which it crashed and gave a BSOD. Looking in the event viewer, i found this: Specs of PC:
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App