Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD: System Service Exception, Random Occurrences

28 Jan 2015   #11
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Woody, I'm not completely awake yet. You'll have to give me a while on this one.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
 or data. See Kernel patch protection for x64-based operating systems
2) A developer attempted to set a normal kernel breakpoint using a kernel
 debugger that was not attached when the system was booted. Normal breakpoints,
 "bp", can only be set if the debugger is attached at boot time. Hardware
 breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d896051624, Reserved
Arg2: 0000000000000000, Reserved
Arg3: 591308667d93d18b, Failure type dependent information
Arg4: 0000000000000101, Type of corrupted region, can be
 0 : A generic data region
 1 : Modification of a function or .pdata
 2 : A processor IDT
 3 : A processor GDT
 4 : Type 1 process list corruption
 5 : Type 2 process list corruption
 6 : Debug routine modification
 7 : Critical MSR modification



My System SpecsSystem Spec
.
28 Jan 2015   #12
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Woody, please run a complete scan with your anti virus. After that please run a scan with these online anti virus scanners.

Scan with Kaspersky TDSSKiller:
Anti-rootkit utility TDSSKiller
Anti-rootkit utility TDSSKiller
ESET online scanner:
Free Virus Scan | Online Virus Scanner from ESET
Free Online Virus Scanner | ESET


Also please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
My System SpecsSystem Spec
28 Jan 2015   #13
Woody89

Windows 7 Enterprise 64-bit
 
 

Scanned with all three, no threats found. Ironically had another BSOD during the Security Essentials scan and had to restart it. Sfc /scannow says there were no integrity violations.
My System SpecsSystem Spec
.

28 Jan 2015   #14
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

OK, Let's try this. But, create a Restore Point before you do it. An absolute must! The link to how is below. If you don't create a restore point, you may be reinstalling. Sort driver by provider. enable all drivers not provided by Microsoft.

warning   Warning
Be sure to create a System Restore point before proceeding further System Restore Point - Create


Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
information   Information

What is Driver Verifier:
It puts stress on the drivers, and tries to make the faulty driver crash the computer. It is designed this way, to attempt to trap the offending driver.


What you will notice:
It will tend to make the computer rather slow and sluggish because the drivers are being stressed.
warning   Warning

Before enabling DV, make sure you have created a system restore point before enabling Driver Verifier. make a System Restore Point manually before enabling DV.


Tip   Tip




Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
28 Jan 2015   #15
Woody89

Windows 7 Enterprise 64-bit
 
 

Made the restore point and have booted to desktop okay with Verifier active. I'll post back any dump files from here on if I get a crash.
My System SpecsSystem Spec
28 Jan 2015   #16
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Good. That's the purpose of it, to make the computer BSOD and hopefully catch the offending driver. Use the PC any way you want and keep verifier on for 24 hours of actual use.
My System SpecsSystem Spec
29 Jan 2015   #17
Woody89

Windows 7 Enterprise 64-bit
 
 

No Blue Screens at all since yesterday morning, before Driver Verifier was activated. The PC has been on for about 25 hours, although I wasn't using it over night.
My System SpecsSystem Spec
29 Jan 2015   #18
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Try letting it run just a little longer. It's a good chance at catching the bad guy. So, let it run a little longer, if you don't mind. then you can disable it. Driver Verifier - Enable and Disable
My System SpecsSystem Spec
30 Jan 2015   #19
Woody89

Windows 7 Enterprise 64-bit
 
 

I left it on until about thirty minutes ago, and disabled it. No crashes in that time. Five minutes later (after a reboot), crashed but no BSOD. The screen just glitched and froze. There's nothing in the system logs about it, the crash anyway. But after rebooting I've got this for the first time: Data error on device. Device: \Device\RaidPort0 Model: WDC WD5000AAKS-00UU3A0 Firmware Version: 01.0 Serial Number: WD-WCAYU6358545 Port: 1 And: The device, \Device\Harddisk0\DR0, has a bad block. I have never seen those before in my event viewer.
My System SpecsSystem Spec
30 Jan 2015   #20
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Run Seatools for DOS SeaTools for DOS and Windows - How to Use The short and the long test.
My System SpecsSystem Spec
Reply

 BSOD: System Service Exception, Random Occurrences




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD, System Service Exception and IRQL Less not equal.
Hi, My computer is fairly new and ive owned it for less than a few weeks. The computer seems to be running fine and there are not many programs installed yet. However today, in the span on 15-20min i have recieved 3 BSoD errors, the first one a system service exception, and after, two IRQL...
BSOD Help and Support
BSOD from System Service Exception and KMode Exception Not Handled
For a long time now i have been getting BSOD's, pretty much all of the time from System Service Exception and KMode Exception Not Handled. Sometimes the PC never gets to the BSOD and just freezes up and restarts. This happens at any time whether im doing nothing or on the internet, sometimes it...
BSOD Help and Support
Random BSOD fresh win7 install system service exception
Hello everyone, this is my first time on this forum. I recently built my own computer but have been getting random BSOD. They happen randomly while doing nothing in particular, every few hours. I couldn't figure out the problem so I sent my PC to best buy geek squad. After over 2 weeks (they said...
BSOD Help and Support
BSOD - Kmode exception and System Service exception
Hi Guys, I'm a composer working on a deadline and have started to experience quite intermittent BSOD's. It appears to happen at higher system loads. I'm reasonably experienced in building custom machines (this is my third on), and so far have never experienced issues with them. This current...
BSOD Help and Support
BSOD at random times, "System Service Exception"
hey, Recently I have been getting BSOD's with the error "System Service Exception". I have Windows 7 Ultimate, 64-Bit. All of the parts of my PC are less than 6 months old. The crashes are random. Any help identifying the problem would be appreciated. Thanks
BSOD Help and Support
random BSOD's; 'system service exception' and 'memory management'
I'm being plagued by BlueScreen errors; Memory_Management and System_Service_Exception are the named ones that stick out in my mind but I'm sure there have been others. I suspect that some program files are corrupt but I'm not gonna pretend that I know anything about computers so I thought it best...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App