Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD Errors 0x19, 0x1A, 0x3B,

24 Jan 2015   #11
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I found one for the 22nd, which was in your last DM Log.

Please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

If it says 'No integrity violations found' the next thing is To create a restore point (the link to how is below) That is important as it may be your only way back. Sort the driver by provider and select all drivers NOT PROVIDED by Microsoft. Use your computer as normal for at least 24 hours of actual use. If there is anything you do which usually cause a BSOD, do it frequently. You computer may seem a little slow and sluggish, this is normal. We are putting stress on your drivers in an attempt to make the bad driver crash the computer and get caught by the dump file.

warning   Warning
Be sure to create a System Restore point before proceeding further System Restore Point - Create


Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
information   Information

What is Driver Verifier:
It puts stress on the drivers, and tries to make the faulty driver crash the computer. It is designed this way, to attempt to trap the offending driver.


What you will notice:
It will tend to make the computer rather slow and sluggish because the drivers are being stressed.
warning   Warning

Before enabling DV, make sure you have created a system restore point before enabling Driver Verifier. make a System Restore Point manually before enabling DV.


Tip   Tip




Let us know the results, with the subsequent crash dumps, if any.


My System SpecsSystem Spec
.
25 Jan 2015   #12
kdgl

Windows 7 Ultimate x64
 
 

I'm sorry I posted the wrong file. I did have another crash here is the right one.
My System SpecsSystem Spec
25 Jan 2015   #13
kdgl

Windows 7 Ultimate x64
 
 

I did I posted the wrong file. Here is the right one.
My System SpecsSystem Spec
.

25 Jan 2015   #14
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
My System SpecsSystem Spec
25 Jan 2015   #15
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You are having issues with corrupted system files. That is most likely caused by your illegal operating system.

Counterfeit installations such as yours contain heavily modified code that causes the installation to behave it unexpected ways. Analyzing BSOD's and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.

My recommendation is to install a genuine Windows 7. This will minimize the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a Genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them
My System SpecsSystem Spec
25 Jan 2015   #16
kdgl

Windows 7 Ultimate x64
 
 

I have tried the scan over 3 times and it is still says files were found but could not be repaired. Also I have activated my Windows as seen in my attached screenshot.
My System SpecsSystem Spec
25 Jan 2015   #17
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Only because you have an activation exploit which alters system files as the post above says.
My System SpecsSystem Spec
25 Jan 2015   #18
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You are using the Stolen Lenovo Key that was Blacklisted by Microsoft before Windows 7 was even released. There is no way possible you could have activated it without an exploit and heavy editing of protected system files. And you want to know why you have corrupted system files, that's why. If you will install a legal copy of Windows I suspect you will have a much better install and it will work right. If you do that and still have problems, we will be happy to assist you.
My System SpecsSystem Spec
Reply

 Multiple BSOD Errors 0x19, 0x1A, 0x3B,




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Multiple BSOD 0x0a, 0x1a, 0x4e, 0x50, 0x3b (IRQL, SYS_SERV_EXC, etc)
Hi, I have a Dell Optiplex 9020 Lab with about 30 computers in there. The computers are running Windows 7 64 bit. There is one computer that has about 5 different types of bluescreens happening over the last few months. I attached a SF Diag Tool Zip. Any help on what could be the problem? I...
BSOD Help and Support
Lots off BSOD like 0x3b,0x24,0x1a,0X7e,0x50 etc
Started with no reason.. week before i updated graphics card driver. When i ran Memtest86, its shows lots of errors. Is it RAM false and why it started? Thanks to all before!
BSOD Help and Support
BSOD playing Aion, error 0x50, 0x3b and 0x1a
Hi Win7 Forum! My girlfriend has been having problems with her newly bought (previously used though) computer. She's gotten two BSOD while playing Aion. Both of them occurring after only a couple of minutes of gaming. Minidump also shows two other BSOD registered (first two) that she hasn't...
BSOD Help and Support
Multiple BSOD Brand New Win7 Pro 64bit 0x19 and 0x3b
Hey guys, I am at a loss here I have gotten multiple BSOD's on my new Laptop. I am currently trying to use the SF Diagnostic Tool to grab my dumps for uploading but getting a weird \\desktop not found error. I have downloaded and run the bluescreenview utility, I have attached screen shots...
BSOD Help and Support
BSOD playing Dragon Nest/League of Legends, errors 0x7E, 0x19, 0x3B
I reinstalled Windows 7 about a week ago, still getting BSODs. Attached below are my minidump files. My system specs are: Intel Core i3 CPU 530 @ 2.93GHz Motherboard: ECS H55H-M 4GB RAM Sound Cards: VIA High Definition Audio/Intel(R) Display Audio Graphics Card: Intel HD Graphics ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App