Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD Errors 0x19, 0x1A, 0x3B,

23 Jan 2015   #1
kdgl

Windows 7 Ultimate x64
 
 
Multiple BSOD Errors 0x19, 0x1A, 0x3B,

Over the past couple of weeks my computer has suffered many BSOD of errors. I will be working and out of the blue I will see one. I have ran tests on my memory and my hard drives but did not find any errors. I think it could be a driver but all of mine are up to date! Any help would be greatly appreciated. Thanks and have a nice day! Here is everything that WhoCrashed has told me.... Also attached is the DM Log.

System Information (local)
--------------------------------------------------------------------------------

computer name: GRAYSON-PC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
Hardware: MS-7850, MSI, B85-G41 PC Mate(MS-7850)
CPU: GenuineIntel Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 8514437120 total




--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Thu 1/22/2015 3:48:13 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\012215-5444-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x76E80)
Bugcheck code: 0xA (0x8, 0x2, 0x1, 0xFFFFF80002A85161)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Thu 1/22/2015 3:48:13 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: dxgmms1.sys (dxgmms1!VidMmInterface+0x9BBF)
Bugcheck code: 0xA (0x8, 0x2, 0x1, 0xFFFFF80002A85161)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: DirectX Graphics MMS
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.



On Tue 1/20/2015 4:14:22 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\011915-6099-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x76E80)
Bugcheck code: 0x19 (0x3, 0xFFFFF880059D10B0, 0xFFFFE880059D10B0, 0xFFFFF880059D10B0)
Error: BAD_POOL_HEADER
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a pool header is corrupt.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Mon 1/19/2015 10:17:02 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\011915-5553-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x76E80)
Bugcheck code: 0x1A (0x5003, 0xFFFFF70001080000, 0x258A, 0x28FF00000B14)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Mon 1/19/2015 6:02:06 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\011915-6193-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x76E80)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002BB1123, 0xFFFFF88007B7F8E0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.


My System SpecsSystem Spec
.
23 Jan 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please update your system specs in the 'My System Specs' in the bottom left of your last post. That way it will be available with every post and we don't have to hunt for it. Also, please be as detailed as possible as we many times have to look up a component and need Manufacturer and model number sometimes. Please include your PSU and CPU cooler as well. This is what I usually post. Maybe something in it will make it easy for you. Thanks.
Please fill out your System Specs

information   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs
My System SpecsSystem Spec
23 Jan 2015   #3
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

kdgl, here are the results of your 4 dump files. Please note that each one has a different stop code and 3 of the 4 were a different cause. In my experience, that is usually caused by memory.

Code:
fffff880`03cff0a8  fffff880`0f1a0055Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 
 atikmdag
start             end                 module name
fffff880`0f024000 fffff880`102a8000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Thu Nov 20 20:30:27 2014 (546EA3C3)
    CheckSum:         0121F198
    ImageSize:        01284000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Code:
MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000005003, The subtype of the bugcheck.
Arg2: fffff70001080000
Arg3: 000000000000258a
Arg4: 000028ff00000b14

Code:
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002bb1123, Address of the instruction which caused the bugcheck
Arg3: fffff88007b7f8e0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffff880059d10b0, the pool entry being checked.
Arg3: ffffe880059d10b0, the read back flink freelist value (should be the same as 2).
Arg4: fffff880059d10b0, the read back blink freelist value (should be the same as 2).
I hate to start you out on the long test, but as I say, that is usually the result of bad memory. I know you said you have already checked it, but please do it this way.

Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
My System SpecsSystem Spec
.

23 Jan 2015   #4
kdgl

Windows 7 Ultimate x64
 
 

I have already ran Memtest86+ for over 10 hours. But hey another shot can't hurt! I will run it overnight again and post my results tomorrow! Thanks so much for your response.
My System SpecsSystem Spec
24 Jan 2015   #5
kdgl

Windows 7 Ultimate x64
 
 

The test ran over 8 passes and no errors were found. What should I try next?
My System SpecsSystem Spec
24 Jan 2015   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If you have any more BSODs upload the Blue Screen of Death (BSOD) Posting Instructions here again.

Run the short and long test with Seatools for DOS SeaTools for DOS and Windows - How to Use
My System SpecsSystem Spec
24 Jan 2015   #7
kdgl

Windows 7 Ultimate x64
 
 

I ran both the long and short tests on both my SSD and regular hardrive and both passed. What should I try next?
My System SpecsSystem Spec
24 Jan 2015   #8
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

My System SpecsSystem Spec
24 Jan 2015   #9
kdgl

Windows 7 Ultimate x64
 
 

Here it is.
My System SpecsSystem Spec
24 Jan 2015   #10
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You haven't had a BSOD since we started this thread? I'm pretty sure the dump files are the same
My System SpecsSystem Spec
Reply

 Multiple BSOD Errors 0x19, 0x1A, 0x3B,




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Multiple BSOD 0x0a, 0x1a, 0x4e, 0x50, 0x3b (IRQL, SYS_SERV_EXC, etc)
Hi, I have a Dell Optiplex 9020 Lab with about 30 computers in there. The computers are running Windows 7 64 bit. There is one computer that has about 5 different types of bluescreens happening over the last few months. I attached a SF Diag Tool Zip. Any help on what could be the problem? I...
BSOD Help and Support
Lots off BSOD like 0x3b,0x24,0x1a,0X7e,0x50 etc
Started with no reason.. week before i updated graphics card driver. When i ran Memtest86, its shows lots of errors. Is it RAM false and why it started? Thanks to all before!
BSOD Help and Support
BSOD playing Aion, error 0x50, 0x3b and 0x1a
Hi Win7 Forum! My girlfriend has been having problems with her newly bought (previously used though) computer. She's gotten two BSOD while playing Aion. Both of them occurring after only a couple of minutes of gaming. Minidump also shows two other BSOD registered (first two) that she hasn't...
BSOD Help and Support
Multiple BSOD Brand New Win7 Pro 64bit 0x19 and 0x3b
Hey guys, I am at a loss here I have gotten multiple BSOD's on my new Laptop. I am currently trying to use the SF Diagnostic Tool to grab my dumps for uploading but getting a weird \\desktop not found error. I have downloaded and run the bluescreenview utility, I have attached screen shots...
BSOD Help and Support
BSOD playing Dragon Nest/League of Legends, errors 0x7E, 0x19, 0x3B
I reinstalled Windows 7 about a week ago, still getting BSODs. Attached below are my minidump files. My system specs are: Intel Core i3 CPU 530 @ 2.93GHz Motherboard: ECS H55H-M 4GB RAM Sound Cards: VIA High Definition Audio/Intel(R) Display Audio Graphics Card: Intel HD Graphics ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App