Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: So many BSODs..

11 Feb 2015   #1
RyeRye28

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
So many BSODs..

I've been getting so many BSODs for like the past week, I have no idea why they started but im not to technologically advanced, I just did the basics like System Restore and updated my drivers with SlimDrivers. Nothing has been working. I tested my memory with BurnInTest. So I highly doubt its that. ANY advice would be greatly appreciated. Thanks.

These are just a few logs. I get these BSODs so often...
Heres my recent logs from WhoCrashed:

On Wed 2/11/2015 11:23:00 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
uptime: 00:32:28
This was probably caused by the following module: ntfs.sys (Ntfs!NtfsPagingFileIo+0x155)
Bugcheck code: 0x24 (0xC08A5, 0x0, 0x0, 0x0)
Error: NTFS_FILE_SYSTEM
file path: C:\Windows\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
Bug check description: This indicates a problem occurred in the NTFS file system.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Wed 2/11/2015 10:49:57 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\021115-23493-01.dmp
uptime: 00:27:25
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x7F (0x8, 0x80050033, 0x406F8, 0xFFFFF800032FF3A7)
Error: UNEXPECTED_KERNEL_MODE_TRAP
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Wed 2/11/2015 2:02:12 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\021015-21512-01.dmp
uptime: 00:41:55
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF80003390525, 0x1, 0x0)
Error: KMODE_EXCEPTION_NOT_HANDLED
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time

On Mon 2/9/2015 1:19:16 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\020815-35240-01.dmp
uptime: 03:55:06
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheck+0x0)
Bugcheck code: 0x17 (0x0, 0x0, 0x0, 0x0)
Error: CID_HANDLE_DELETION
Bug check description: This bug check appears very infrequently.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
More about : bsod


My System SpecsSystem Spec
.
12 Feb 2015   #2
RyeRye28

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Bump
My System SpecsSystem Spec
12 Feb 2015   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

As different bugcheck codes are pointing to hardware failure, let us go for it at the first place.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us.

Stress test the CPU.
Hardware - Stress Test With Prime95
It saves the result as a .txt file in the prime95's folder. Upload the file for us.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator - The most trusted PSU Wattage Calculator
Also let us know the wattage of the PSU.
________________________________
Code:
BugCheck 7F, {8, 80050033, 406f8, fffff800032ff3a7}

Probably caused by : hardware ( nt!KiDoubleFaultAbort+b2 )

Followup: MachineOwner
---------
Code:
BugCheck 1E, {ffffffffc0000005, fffff80003390525, 1, 0}

Probably caused by : hardware ( nt!KiEmulateAtlThunk+45 )

Followup: MachineOwner
---------
My System SpecsSystem Spec
.

12 Feb 2015   #4
RyeRye28

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I tested my memory a few days ago it was fine. Most of my BSODs occur while im watching videos on my computer, usually fullscreened like livestreams and such. They are all so random though its hard to pin point.

Something to note:
EVERYtime my computer BSODs, when my computer comes back on my Network Device (that makes my computer wireless, Linksys AE2500 always shows disconnected and I have to unplug it and plug it back in for it to be recognized.

For my Video Card test I BSOD'd a few minutes in on it twice. But the third one came out good and there is a dip in the timeline it was when I screenshotted it.

The hardware test was good

My computer can't get hot because it isn't on long enough before it BSODs. Its usually every 15-20 minutes or so..
I also put in the results for my hardware test.
I don't know how I fill out my power supply info.

Here is my computer if this helps any:
iBUYPOWER Gamer Supreme TG978SLC Gaming PC - 3rd generation Intel Core i7-3770K 3.5GHz, 16GB DDR3, 1TB HDD, DVDRW, Dual AMD Radeon HD 7850, Windows 7 Home Premium 64-bit, Liquid Cooling at TigerDirect.com
My System SpecsSystem Spec
13 Feb 2015   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote:
For my Video Card test I BSOD'd a few minutes in on it twice.
A point to consider. As you did not supply the speccy shpt, we cannot check the system temps, but whatever, this is a strong indication that the card is not being able to take a load on a regular basis. I would suggest you to try any other display source (either onboard graphics or any other card card known to be good) and see how it goes.


Quote:
EVERYtime my computer BSODs, when my computer comes back on my Network Device (that makes my computer wireless, Linksys AE2500 always shows disconnected and I have to unplug it and plug it back in for it to be recognized.
Will check thos part, after the prima facie issue (display) is under control.
My System SpecsSystem Spec
13 Feb 2015   #6
RyeRye28

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I dont think my gfx card is the reason, I think it was just random BSODs and it happened to be when i was doing the test, because i ran it twice again for 20 minutes and it was fine.

Here is an hour of usage tempetures

Gyazo - 11b865171cafde999d38287cc3633013.png
My System SpecsSystem Spec
14 Feb 2015   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by RyeRye28 View Post
I dont think my gfx card is the reason, I think it was just random BSODs and it happened to be when i was doing the test, because i ran it twice again for 20 minutes and it was fine.

Here is an hour of usage tempetures

Gyazo - 11b865171cafde999d38287cc3633013.png
I will prefer to trust on fact than thoughts. But that is your issue. I just can guide you. Acceptance or otherwise is totally on you.

If you prefer to not accept, I dont see any point to proceed any further.
My System SpecsSystem Spec
14 Feb 2015   #8
RyeRye28

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Arc View Post
Quote   Quote: Originally Posted by RyeRye28 View Post
I dont think my gfx card is the reason, I think it was just random BSODs and it happened to be when i was doing the test, because i ran it twice again for 20 minutes and it was fine.

Here is an hour of usage tempetures

Gyazo - 11b865171cafde999d38287cc3633013.png
I will prefer to trust on fact than thoughts. But that is your issue. I just can guide you. Acceptance or otherwise is totally on you.

If you prefer to not accept, I dont see any point to proceed any further.
I wish you would help me and look through my BSOD dumps and try to help me instead of lecturing me. Because i've done everything you said and it all checked out good. I keep running the video test nothing happens.

Also I wish you would tell me what to do if it was my video card, im not smart with computers so I have no idea.

Gyazo - a925225f51f0181eb72ef4f551337242.png
My System SpecsSystem Spec
14 Feb 2015   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

I dont want to lecture you. I am not your teacher. I just tried to help you, only because you asked for it, and it is the objective of the forum that one member helps the other.

As you have got BSODs a multiple instances during running furmark despite of the such an under control heat, there is a fair chance (you have to understand that word, "fair chance") that the graphics card is failing to take load; may not be always, but occasionally.

I also said in post #5 very clearly that what you "should" do in this situation.
Quote:
I would suggest you to try any other display source (either onboard graphics or any other card card known to be good) and see how it goes.
My System SpecsSystem Spec
14 Feb 2015   #10
RyeRye28

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Arc View Post
I dont want to lecture you. I am not your teacher. I just tried to help you, only because you asked for it, and it is the objective of the forum that one member helps the other.

As you have got BSODs a multiple instances during running furmark despite of the such an under control heat, there is a fair chance (you have to understand that word, "fair chance") that the graphics card is failing to take load; may not be always, but occasionally.

I also said in post #5 very clearly that what you "should" do in this situation.
Quote:
I would suggest you to try any other display source (either onboard graphics or any other card card known to be good) and see how it goes.
I don't know what that means, "on board graphucs or any other card"
My System SpecsSystem Spec
Reply

 So many BSODs..




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Why does there seem to be more BSODs with Win 7?
About 4 weeks ago I moved form XP Pro to Win 7 Pro 64-bit. During the many years on XP Pro on different PCs I can't recall any BSODs - there may have been the odd one, but that's all. Moving to Win 7 Pro 64-bit on my 8-month old PC I've had one or two BSODs a day. As all my drivers now show...
General Discussion
BSODs, lots of BSODS
Hi, The blue screen of death are coming with win32k.sys, at first then irql_not_less_or_equal. I have win7 64 bit, clean installed like 1 year or so back. The dell hardware I bought was almost 2 years back but was fully replaced, motherboard, cpu except hardrive 6 months back. It is...
BSOD Help and Support
A few different BSODs..
Hey! First of, I'd like to express my respect for this community, helping people out like this deserves all credit! I'm running Windows 7 Proffesional x64. It's a retail version. The current install has been running for about 4-5 months. The system is about a year old, I built it myself. ...
BSOD Help and Support
3 Different BSODs
Hello all, I am getting three different BSODs fairly regularly. The ones I am getting are: MEMORY MANAGEMENT IRQL_NOT_LESS_THAN_OR_EQUAL PFN_LIST_CORRUPT I think I have traced the cause to the Radeon HD5850 drivers that I am running, but I am not 100% sure and I may be (read: probably)...
BSOD Help and Support
now its different BSODs.
Ok here are the last couple minidumps. Anyone have any ideas?
BSOD Help and Support
x64 BSODs...again
Well after two months of mostly blue screen free life, they've returned and brought about by a game called "The Saboteur" no less! The game is notoriously unstable, not working on almost all ATi machines. Fortunately, I don't have an ATI rig, which makes the problem a little harder to pin point. 15...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App