Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Found computer rebooted with bluescreen error message

13 Feb 2015   #1
augerpro

Windows 7 Home Premium 64bit
 
 
Found computer rebooted with bluescreen error message

As the title says I came home and found my computer had rebooted. Logging in I had a bluescreen error message. Pulled the info from the error message and attached to this post. I assume all the hardware info is in sysdata file. Only thing I can add is the computer is overclocked to @4.3ghz, but well cooled and has been dead stable for several years now.

Also curious what .dmp file reader is good one for someone marginally computer literate. I see the windows one appears to be command line, obviously I would rather have something windows based.

Thank you!!


My System SpecsSystem Spec
.
13 Feb 2015   #2
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Which part of the information at the top of the page didn't you understand, explaining what files are needed to help you solve your BSOD?
My System SpecsSystem Spec
13 Feb 2015   #3
augerpro

Windows 7 Home Premium 64bit
 
 

attached
My System SpecsSystem Spec
.

13 Feb 2015   #4
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff88077bd3b8c, 1, fffff88000dd9f3c, 5}


Could not read faulting driver name
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
Run a minimum of 8 consecutive passes, preferably overnight, or until errors occur using MemTest86+.

Reference:
RAM - Test with Memtest86+
My System SpecsSystem Spec
13 Feb 2015   #5
augerpro

Windows 7 Home Premium 64bit
 
 

Will do thanks!
My System SpecsSystem Spec
16 Feb 2015   #6
augerpro

Windows 7 Home Premium 64bit
 
 

Passed 12 passes with the cpu at stock speeds and 11 passes with cpu overclocked. I did this because I wasn't sure if an issue with the cpu's memory controller could be an issue too (even though I haven't overclocked it or upped the voltage). What next?
My System SpecsSystem Spec
16 Feb 2015   #7
augerpro

Windows 7 Home Premium 64bit
 
 

So a couple minutes after the above post the computer crashed. Put the cpu back to default clock for now. When I logged back into windows I got a blackscreen then crash again. Something is definitely failing. Attached are the reports.
My System SpecsSystem Spec
03 Mar 2015   #8
augerpro

Windows 7 Home Premium 64bit
 
 

Just crashed again. Weird thing is it never crashes under high loads like video encoding.
My System SpecsSystem Spec
08 Mar 2015   #9
augerpro

Windows 7 Home Premium 64bit
 
 

No one has any more insight?
My System SpecsSystem Spec
08 Mar 2015   #10
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Code:
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800fb11dbb, fffff88005d28228, fffff88005d27a80}

Probably caused by : atikmdag.sys ( atikmdag+c7dbb )

Followup: MachineOwner
---------

3: kd> lmvm atikmdag
start             end                 module name
fffff880`0fa4a000 fffff880`1095a000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Fri Apr 18 11:43:16 2014 (53508A3C)
    CheckSum:         00EAEEE6
    ImageSize:        00F10000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Check to see if a more updated video driver is available. If so, install that.
My System SpecsSystem Spec
Reply

 Found computer rebooted with bluescreen error message




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Regsvr32 error message...dll module not found
I am running Windows 7 Home Premium 64 bit. On start I keep getting the regsvr 32 error message that the module for qcncodecs4.dll cannot be found. Apparently this dll has been deleted. No problem. I am not interested in getting it back, I just want to stop the error message from appearing every...
General Discussion
BSOD Error Message - The Computer has rebooted from a bugcheck.
Hi, New to forums. Computer has rebooted a couple of times in the last month. Added details from event viewer and also updated dump files. Any help / suggestions to understand problem would be greatly appreciated Critical Error - Event ID 41 Source Kernel-Power The system has rebooted...
BSOD Help and Support
Error message "No drives found" on boot up after new build & install
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23 Detecting drives; Done; No...
Installation & Setup
The computer has rebooted from a bugcheck.
I am a newbie for this. Please help me also with the same bugcheck 0x0000009f but I already did the erecovery for factory OS settings for my laptop. Any help? The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8006371060, 0xfffff80000b9c518,...
BSOD Help and Support
The computer has rebooted from a bugchec
can someone help me with this Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 19/08/2009 00:22:26 Event ID: 1001 Task Category: None Level: Error Keywords: Classic User: N/A
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App