Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: usbport.sys/usbehci.sys BSODs have skyrocketed in last few days

11 Mar 2015   #11
Bilge

Win 7 Pro 64-bit
 
 

Arc, replaced my USB NETGEAR adapter with an internal PCI adapter, and have been minimizing the time when I've got my Smart Card reader plugged in ... and I still managed to get a recent BSOD claiming USBPORT.SYS as the culprit (the most recent dump file).

At this point, my only USB connections are a Dell RF keyboard receiver and 4-port USB hub with a MS Arc mouse adapter plugged into it ... unless some drivers are still running services despite the devices being disconnected.

Thanks,
Bilge


My System SpecsSystem Spec
.
12 Mar 2015   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
BugCheck D1, {fffffa8019c76109, 2, 1, fffff88005841803}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
---------
It repoets memory corruption, so we need to check for it. It causes for not only a failing memory but also a misbehaving driver.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
16 Mar 2015   #13
Bilge

Win 7 Pro 64-bit
 
 

Arc, I ran the memTest for 10 passes with no errors, then ran the CCleaner pro cleanup/registry tweak, and finally finished up about 2 days worth of Driver Verifier with no BSODs.

Thanks,
Bilge
My System SpecsSystem Spec
.

17 Mar 2015   #14
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Well, apparently there is no more reasons for a stop 0xD1 left unchecked.
My System SpecsSystem Spec
31 May 2015   #15
Bilge

Win 7 Pro 64-bit
 
 

It's been a while since I last posted, but I've still been experiencing a lot of BSODs, kicking out a usbport.sys or occasionally another code.

If DM Log Collector v1.2 no longer generates a final output file on the desktop (despite running flawlessly), is there another way to present the log collection for analysis?

Thanks!
Bilge
My System SpecsSystem Spec
01 Jun 2015   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Bilge View Post

If DM Log Collector v1.2 no longer generates a final output file on the desktop (despite running flawlessly), is there another way to present the log collection for analysis?
Yes, there is. Try SF Diag tool.
My System SpecsSystem Spec
01 Jun 2015   #17
Bilge

Win 7 Pro 64-bit
 
 

Arc, Norton keeps blasting the SF Tool off the hard drive. Would WinDbg or another program provide the same visibility?

Also, despite 1-5 BSODs a day, it looked like I only had one 820MB Memory.dmp and one Minidump from March. I went in yesterday and ensured Win7 was configured to generate minidumps, but it would seem that all of the recent BSODs weren't generating minidumps. Do they tend to produce one file per event?
My System SpecsSystem Spec
01 Jun 2015   #18
Bilge

Win 7 Pro 64-bit
 
 

Sorry for the double-tap, but in the one minidump file I have, windbg highlights ntoskrnl.exe and usbport.sys as likely culprits (though I didn't have time to figure out how to properly load the symbols for windbg).

V/r,
Bilge
My System SpecsSystem Spec
01 Jun 2015   #19
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Bilge View Post
Arc, Norton keeps blasting the SF Tool off the hard drive.
Thats false.
My System SpecsSystem Spec
01 Jun 2015   #20
Bilge

Win 7 Pro 64-bit
 
 

Arc, before I can get to the log collector it appears that the BSODs are no longer generating minidump files. Any tips for how to restore this? I've had it configured for minidumps under the Startup & Recovery menu, so I'm uncertain why they are no longer produced.

Bilge
My System SpecsSystem Spec
Reply

 usbport.sys/usbehci.sys BSODs have skyrocketed in last few days




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing FIFA 14, ntoskrnl.exe, usbehci.sys,IRQL_NOT_LESS_OR_EQUAL
Additional Info: 1. Not overclocking 2. 750W PSU Attached the SF Diagnostic Tool zip. BSOD started since: 1. Replaced motherboard and processor. 2. Fresh installation of Windows 7. 3. Upgraded from Kaspersky Internet Security 2013 to 2014.
BSOD Help and Support
Different BSODS occuring, latest include usbport.sys
Hey there, I know I've been on here before and had BSOD problems before, but these were resolved for a long long time :). Unfortunatly I've been getting bsods again, as of the start of 2013. I hope you guys will be able to help me out. I'll attach the dump files. Thanks in advance, Thomas
BSOD Help and Support
CPU skyrocketed
My laptop is an ASUS notebook G72GX series, Intel core 2 duo CPU 6GB RAM windows 64 bit As soon as its started up the CPU is running at 98% maximum frequency and the perpetrator is "Image:System, Description:NT Kernel & System". I've looked it up and haven't seen any with success except...
Performance & Maintenance
12 BSODs in Five Days
Okay, My name is Chelsy. Thank you for reading and possibly helping! We have been having a problem for months and it is on my roommates computer, but since I am really good at finding answers I am the one searching and posting. He replaced his HDD recently to a Western Digital 1TB Caviar...
BSOD Help and Support
Win7 x64 BSODs - dxgmms1.sys / usbport.sys / IRQL_NOT_LESS_OR_EQUAL
Hi, I've had regular BSODs with varying file references and error messages in the last few days. It only seems to happen while playing games or watching videos and has become very frustrating. I'm running Win7 x64 Ultimate retail which is a clean install from a month or so ago. At the same...
BSOD Help and Support
2 BSODs 2 Days
Is Windows 7 . . . - x86 (32-bit) or x64 ? 64 - the original installed OS on the system? W7 - an OEM or full retail version? Full retail - OEM = came pre-installed on system - Full Retail = you purchased it from retailer - What is the age of system (hardware)? September 2009 - What...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App