New
#11
Okay, we will run some tests and see what will happen. Run Seatools for DOS and Windows and MemTest86+
SeaTools for DOS and Windows - How to Use
RAM - Test with Memtest86+
Okay, we will run some tests and see what will happen. Run Seatools for DOS and Windows and MemTest86+
SeaTools for DOS and Windows - How to Use
RAM - Test with Memtest86+
Hey , sorry for not mentioning earlier but i already have done Memtest86+ on both RAM sticks with 10 passes each. and performed Seatools on windows on both drives which passed. Is it necessary for me to run seatools on DOS seeing that the drives passed on windows version?
Nah, run IntelBurnTest. CPU - Stress Test Using IntelBurnTest
Ah alright. How long should i run the test for?
Ok done. Here are the results shown in the PNG's ive uploaded
Seems fine to me, is your PSU sending the right amount wattage to your PC?
erm may i ask, how do i check that?
Also with the DM log collector file i provided at the start of the thread , is it possible to see ALL the drivers i had installed at the time of the BSOD?
Last edited by EpicViolenT; 22 Feb 2015 at 08:04.
Yes, but this reminded me of something. Run Driver Verifier. Driver Verifier - Enable and Disable
Hey , could you check with the files then if i was running Intel Management Engine interface? And also my PC BSOD after windows logo loads up,and i have done a clean reinstall 2 days ago. is driver verifier still necessary?