Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD errors, new custom build system, tried reformat.

20 Feb 2015   #11
entropical

Windows 7 Ultimate x64
 
 

Alas, cried victory too soon, he just got hit with a new BSOD on a fresh install on the regular HDD (Samsung)

Attached a new log. Almost crying here


My System SpecsSystem Spec
.
20 Feb 2015   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Two different head to head BSODs, two different bugcheck codes.
Code:
BugCheck 1A, {41284, 7fef9541001, 48, fffff70001080000}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4ad3 )

Followup: MachineOwner
---------
Code:
BugCheck 1E, {ffffffffc0000005, fffff80002ecadac, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+487ed )

Followup: MachineOwner
---------
That is the sign of failing memory. We tested the RAM, it is free from errors. We replaced the HDDs to, which will take proper care of pagefiles.

Now what remains there that can throw such issues is the motherboard. But we cannot test it. In this situation it will be better to RMA the motherboard.

New motherboards may be faulty. I also sent a brand new motherboard to RMA just today. Today [15]
My System SpecsSystem Spec
20 Feb 2015   #13
entropical

Windows 7 Ultimate x64
 
 

That's depressing to hear.

Do you perhaps have some tips for unseating the heatsink from the motherboard? We have never done this before and I guess we should buy some sand paper to scratch off the pre-applied thermal paste that was on the boxed cooler and then reapply fresh one once the new/repaired motherboard arrives, or can we use the pre-applied one again?

I'll try Google myself but any tips are welcome.
My System SpecsSystem Spec
.

21 Feb 2015   #14
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Have a look at this video? Its not tough, but little tricky. Its for LGA775, but the procedure is the same for any pin.





It is better to apply new thermal paste.

My board is back within 24 hours. I have to report the service center after using it for 24 more hours.
My System SpecsSystem Spec
21 Feb 2015   #15
entropical

Windows 7 Ultimate x64
 
 

Great, that helped us, what was I thinking sand paper lol!

So for now, nothing to report other than he got a new SSD and new motherboard and is installing Windows as we speak. I won't be around for him to Skype with tonight since I'm staying at my parents-in-law for the night.

I'll update tomorrow or the day after on if it's finally fixed

Greetings and thank you, this cannot be said enough!!!
My System SpecsSystem Spec
21 Feb 2015   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Ok, have a good time at the in-laws place.
My System SpecsSystem Spec
22 Feb 2015   #17
entropical

Windows 7 Ultimate x64
 
 

Hi again, Arc!

Had a good time at the in-laws and my father has been using his new motherboard and SSD for about 24 hours now quite intensively without any BSOD's.

Only problem he had with the new ASUS Z87-C motherboard is that it would restart automatically after initiating a shutdown but disabling Wake on Magic Packet and Wake on LAN resolved that.

Since my father and I rushed to the conclusion that it was the Crucial MX100 256GB SSD causing the BSODs, I contacted customer support from the shop where I bought it as a present for him and they said I would get my money back when I send it back. No loss there.

The faulty motherboard I don't know about that since he didn't wait and just bought a new one, he's trying to get shop credit for it instead of a repaired unit.

Let's keep our fingers crossed this is the end of our troubleshooting days for now.

Have a nice day Arc, maybe they should implement a tipping system or something 'cause thank you really only goes so far.
My System SpecsSystem Spec
22 Feb 2015   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Fingers crossed.

Let us know for any further BSOD.
My System SpecsSystem Spec
23 Feb 2015   #19
entropical

Windows 7 Ultimate x64
 
 

Oh boy, here's a new .dmp file for you if you're interested Arc... fingers crossed didn't help.

It occured while installing drivers for the printer this time.

So by now it's a complete new system minus the RAM... father is losing his mind.
It can only be the RAM by now, don't you think as well?

I think I made a critical error while buying it to not buy a set of so called "matched" RAM but just 2 seperate units in seperate boxes.

Also, it's not listed on the ASUS .pdf file of Qualified Vendors (http://dlcdnet.asus.com/pub/ASUS/mb/...M_QVL_0730.pdf)
Corsair 2x4GB CMV4GX3M1A1333C9 is not listed as far as I can tell

Thanks.
My System SpecsSystem Spec
23 Feb 2015   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Apparently it is ESET that is conflicting with the storage filters.
Code:
fffff880`026b38e8  fffff880`03d7dbb9Unable to load image ehdrv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ehdrv.sys
*** ERROR: Module load completed but symbols could not be loaded for ehdrv.sys
 ehdrv+0x1dbb9
Driver Reference Table - ehdrv.sys
Code:
fffff880`026b4208  fffff880`03cb4a00Unable to load image eamonm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for eamonm.sys
*** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
 eamonm+0x33a00
Driver Reference Table - eamonm.sys

ESET is a brilliant antivirus. But it is the second time within this week I am seeing ESET is causing such an issue. It is a bad luck only.

Uninstall ESET on a test basis. How do I uninstall or reinstall ESET Smart Security/ESET NOD32 Antivirus? - ESET Knowledgebase
Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know how it goes.
My System SpecsSystem Spec
Reply

 Random BSOD errors, new custom build system, tried reformat.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on new custom build random in timing
Hiya, any help with this is much appreciated Win 7 Pro 64bit 4gb RAM 4x MSI R9 270x MSI Z77A-G45 MB Celeron G1620
BSOD Help and Support
Various BSOD errors occurring seemingly randomly. Custom build.
My OS is Windows 7 Professional x64 These seem to happen erratically, at apparently random times, regardless of how heavily my system resources are being used. I've gone weeks without any errors, and I've faced several errors on the same day, even under the same computer usage patterns. I...
BSOD Help and Support
Constant BSOD on new custom build - Various Minidump Errors 0x0000003b
Hi Guys, This is my first attempt at building my own computer so I am not a pro by any means. I've been having issues with blue screens ever since I put the thing together. All the parts are new out of the box. When I first put the machine together I did some troubleshooting on my own and...
BSOD Help and Support
Custom Build PC Random BSOD sometimes
Hello, My friend has a Custom Built computer (1Y old) and now he has problems his computer crashing with the DRIVER_POWER_STATE_FAILURE message. I hope someone can help us finding the problem any help is appreciated. Thanks In Advance.
BSOD Help and Support
Custom build, Random BSOD, ntoskrnl.exe, dxgmms1.sys
W7 64bit SP1 AMD Athlon X 3 450 3.2GHz ARCTIC COOLING Freezer 7 Pro Rev.2 GIGABYTE GA-970A-UD3 Corsair 4G XMS3 TW3X4G1333C9A G XFX Radeon HD5770 Corsair 650TX 650W CREATIVE SB X-Fi Titanium 500GB WD Caviar Black
BSOD Help and Support
New custom build system. 60+ clean installs. Always random BSODs.
First of all I must apologize about my limited English. I'll try to do my best to explain my situation because I really need help. I usually prefer to look for solutions by myself, because I think it's a good way to learn, but this time is different: after hours reading posts and more posts I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App