Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after mobo / memory upgrade - system freezes - etc

28 Feb 2015   #1
BelGarion

Windows 7 x64
 
 
BSOD after mobo / memory upgrade - system freezes - etc

So, let me see. I upgraded my system to an MSI 990FXA-GD80 with GSkill Ripjaws X 16gb 1600 (in 2x8gb sticks that came packaged together so presuming they matched them.) F3-1600CD9-16GXM that GSkill says is compatible with the MSI board. Though the bios only sees it as 1333 when set to auto. No luck unsetting auto and setting the values to what is listed from GSkill, still BSOD errors almost daily and total system freezes that last several minutes that happen every few hours. So I can safely assume that isn't the issue or it's one symptom of a bigger issue. Already did a chkdsk boot up scan of the primary hdd and no errors where found. Did a boot up MemTest86+ test, in one pass no errors. Since I am getting one of two BSOD errors, Kernel InPage Data Error and a Stop 0x000000F4 error, I am pasting the requisite zip file and hope someone can point to what might be the problem. I already reinstalled Windows 7 twice, once after the upgrades and one a week later, already that was about a clean install, in both cases, as one can do, I formatted the partition Windows 7 is installed on before reinstalling Windows 7, didn't fix the problem. Oh! The dmp files in the archive are old, one is from the 17th the other from the 20th, even though according to Control Panel -> System -> Advanced Settings -> Startup & Recovery shows it is set to create a dump file and to not restart automatically. Help?

Update: While waiting, I started a surface scan of the data hdd for good measure. I went into file explorer, right clicked on the drive, properties, tools, scan disk with the surface scan check marked. Mid way though explorer.exe started to eat more and more memory until it was eating over 12gbs, system lag insued and then another (two today) BSOD, this being a Kernel Inpage Data Error (Stop 0x0000007A ). Oddly enough it froze at "Initializing Disk for Crash Dump", waited a good 5 min or so with no change in status so the new upload will have the same old dump files but the rest should, hopefully, be updated.


My System SpecsSystem Spec
.
01 Mar 2015   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello BelGarion mate the one thing you mentioned re the RAM only showing up as 1333MHz now if the new board is anything like my Asus Ivy Bridge one the EUFI BIOS has 1333MHz as a default speed for the RAM and it has to be clocked up if you want any speed out of the RAM - mine is fully clocked to 2400MHz.

Now have you got any new dump files at all??
My System SpecsSystem Spec
01 Mar 2015   #3
BelGarion

Windows 7 x64
 
 

Quote   Quote: Originally Posted by ICIT2LOL View Post
Hello BelGarion mate the one thing you mentioned re the RAM only showing up as 1333MHz now if the new board is anything like my Asus Ivy Bridge one the EUFI BIOS has 1333MHz as a default speed for the RAM and it has to be clocked up if you want any speed out of the RAM - mine is fully clocked to 2400MHz.

Now have you got any new dump files at all??
Nope. The two in /minidump are from the 17th and 20th, the memory.dmp file is also the 20th and a wopping 1gb in size.
My System SpecsSystem Spec
.

01 Mar 2015   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok well the only stuff I can see is there is a problem with disk hardware in all those files so maybe a run with Seatools would not go amiss. https://www.google.com.au/?gws_rd=ssl#q=seatools

Let us know how that one goes

Another surface test is this
HARD DRIVE SURFACE TEST
Now as opposed to the usual drive testers this specifically tests the surface of (usually) a spinner.
It will test the surface of the spinning disk, and I suspect some idea of the performance of the read / write heads.
Download this http://www.partitionwizard.com/free-partition-manager.html my pic will give you the instruction on what to do. It does take some time but it does cover most possibilities with a drive in conjunction with the other testers like Seatools http://www.seagate.com/au/en/support/downloads/item/seatools-win-master/
Let us know how that one goes
My System SpecsSystem Spec
01 Mar 2015   #5
BelGarion

Windows 7 x64
 
 

Quote   Quote: Originally Posted by ICIT2LOL View Post
Ok well the only stuff I can see is there is a problem with disk hardware in all those files so maybe a run with Seatools would not go amiss. https://www.google.com.au/?gws_rd=ssl#q=seatools

Let us know how that one goes

Another surface test is this
HARD DRIVE SURFACE TEST
Now as opposed to the usual drive testers this specifically tests the surface of (usually) a spinner.
It will test the surface of the spinning disk, and I suspect some idea of the performance of the read / write heads.
Download this http://www.partitionwizard.com/free-partition-manager.html my pic will give you the instruction on what to do. It does take some time but it does cover most possibilities with a drive in conjunction with the other testers like Seatools http://www.seagate.com/au/en/support/downloads/item/seatools-win-master/
Let us know how that one goes
The new (and primary) drive is Western Digital and, yes, I did run the WD Diag tool on the drive, says all is good. The Seagate is just a secondary data drive. But I'll give the Partition Wizard thingy a try.
My System SpecsSystem Spec
Reply

 BSOD after mobo / memory upgrade - system freezes - etc




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Computer Freezes and BSOD after a system upgrade
Right so a couple of weeks ago I get the parts needed to upgrade my AMD Phenom II X6 1045T system. I got a new motherboard, an MSI 990FXA-GD80 Rev 2, and 16gb of DDR 2 1600 GSkill memory. Also got a new Fractal Design Define R5 case. I also got a Western Digital WD2003FYPS-27W980 2tb Enterprise...
Hardware & Devices
System freezes after BSOD memory dump, cannot shut down or restart...
Hi everyone, So I've been getting a BSOD on my system when I play certain video files, mostly *.mp4. BSOD error is always the same and involves my ATI graphics drivers, particularly atimpag.sys. Now I've figured out that the error only happens when I have my switchable graphics system set up to...
BSOD Help and Support
System refuses to boot after memory upgrade
I've just tried to upgrade my PC's memory from 8GB to 16GB and have hit a rather worrying problem in that the PC now refuses to boot. Initially, once I'd replaced the old memory modules with the new ones, I got three beeps on power-up, which I quickly established was the result of my not properly...
Hardware & Devices
BSOD after upgrade memory
Recently I have been replaced my current RAM to 4GB, 2 pc of Kingston with 2GB each (KVR800D2N6). However, ever since then, the display blink/flash occasionally and the PC BSOD very frequently. Technical info: *** STOP: 0x000000D1 (0x00A5F9B2, 0x00000002, 0x00000001, 0x9415A4B7) ***...
BSOD Help and Support
3 BSOD's after memory upgrade
Hello, Three days ago, I've bought an additional 4gb of memory. I've chosen the same brand, the same type and the same amount as I had already. The type of memory is Kingston Valueram KVR1066D3N7K2/4G. The memory was not identical though. The chip brand and dimensions were different. ...
BSOD Help and Support
Random BSOD New System (Mobo, VGA, Ram)
Hello, This is my first post in here and I hate that i'm asking for help but here it goes. I bought a new process, mobo, vga, and ram: AMD x6 1090T BE GA - 880GM UD2H 4GB Geil DDR3 1333mhz But after installing windows and drivers I got random BSOD and randomly at time too. I have...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App