Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after "No HDMI signal"

01 Mar 2015   #1
Pleppo

Microsoft Windows 7 Ultimate 64 bit
 
 
BSOD after "No HDMI signal"

Hello, first of all i ask you sorry for my bad english. I got a problem while I was gaming and listening some music: monitor got "No HDMI signals" (music keep listening). So I did reset and after some minutes i got a bluescreen (i didn't read it because it disappeared very quickly), then i restarted and got this message from windows:


Here all the logs needed, hope you'll find THE cause and a solution!
Attachment 351160


My System SpecsSystem Spec
.
01 Mar 2015   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Perhaps you uploaded a wrong file? All the contents of the zip seems to be of 2011.

Delete that zip from your desktop if it is still there. Then click on button below ....

It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
01 Mar 2015   #3
Pleppo

Microsoft Windows 7 Ultimate 64 bit
 
 

I'm sorry! I updated it.
My System SpecsSystem Spec
.

01 Mar 2015   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Lol, dont be sorry. Mistakes happen.

A stop 0x116 is a display/graphics failure. Let us install 347.09 WHQL. NVIDIA DRIVERS GeForce Game Ready Driver WHQL

Then, Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also inform us if you experience any crash or artifacts during the test.
My System SpecsSystem Spec
02 Mar 2015   #5
Pleppo

Microsoft Windows 7 Ultimate 64 bit
 
 

I have a Sapphire HD 7950 3GB GDDR5 with boost Dual-X with 14.12 AMD Catalyst Omega driver.
I got crashed again and this time i was playing on a ps2 emulator.
I did the test for 3 minutes, it reached 62 (with 100% fan) and I got the same blue screen. No artifacts, only freezed for 1 sec and bsod-reset.
I had the same problem about 1 years ago, then it didn't appaer until this days. Probably has nothing to do but all is started since I connected my headset back on my case! xD
Does the logs in attachment says something useful to a solution?
My System SpecsSystem Spec
02 Mar 2015   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Uninstall the installed display driver using DDU and then install CCC 14.4 WHQL.

When done, stress test the Graphics Card using Furmark one more time.
Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also inform us if you experience any crash or artifacts during the test.
_______________________________________________
Code:
BugCheck 116, {fffffa8009a70440, fffff8800680b848, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+b848 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8009a70440, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800680b848, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000002, Optional internal context dependent data.

Debugging Details:
------------------


FAULTING_IP: 
atikmpag+b848
fffff880`0680b848 4883ec28        sub     rsp,28h

DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_FAULT

CUSTOMER_CRASH_COUNT:  1

BUGCHECK_STR:  0x116

PROCESS_NAME:  System

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

STACK_TEXT:  
fffff880`027df888 fffff880`06b0d134 : 00000000`00000116 fffffa80`09a70440 fffff880`0680b848 00000000`00000000 : nt!KeBugCheckEx
fffff880`027df890 fffff880`06b0ce3e : fffff880`0680b848 fffffa80`09a70440 fffffa80`07cbad50 fffffa80`07caa010 : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`027df8d0 fffff880`06bb4f13 : fffffa80`09a70440 00000000`00000000 fffffa80`07cbad50 fffffa80`07caa010 : dxgkrnl!TdrIsRecoveryRequired+0x1a2
fffff880`027df900 fffff880`06bdecf1 : 00000000`ffffffff 00000000`001a7245 00000000`00000000 00000000`00000002 : dxgmms1!VidSchiReportHwHang+0x40b
fffff880`027df9e0 fffff880`06bdd437 : 00000000`00000102 00000000`00000004 00000000`001a7245 00000000`00000000 : dxgmms1!VidSchiCheckHwProgress+0x71
fffff880`027dfa10 fffff880`06bb02d2 : ffffffff`ff676980 fffffa80`07caa010 00000000`00000000 00000000`00000000 : dxgmms1!VidSchiWaitForSchedulerEvents+0x1fb
fffff880`027dfab0 fffff880`06bdcff6 : 00000000`00000000 fffffa80`07f25d50 00000000`00000080 fffffa80`07caa010 : dxgmms1!VidSchiScheduleCommandToRun+0x1da
fffff880`027dfbc0 fffff800`0312a73a : 00000000`fffffc32 fffffa80`07cad200 fffffa80`066a59e0 fffffa80`07cad200 : dxgmms1!VidSchiWorkerThread+0xba
fffff880`027dfc00 fffff800`02e7f8e6 : fffff800`03009e80 fffffa80`07cad200 fffff800`03017cc0 732d7265`792e2e6d : nt!PspSystemThreadStartup+0x5a
fffff880`027dfc40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND:  .bugcheck ; kb

FOLLOWUP_IP: 
atikmpag+b848
fffff880`0680b848 4883ec28        sub     rsp,28h

SYMBOL_NAME:  atikmpag+b848

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: atikmpag

IMAGE_NAME:  atikmpag.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  546e9eb6

FAILURE_BUCKET_ID:  X64_0x116_IMAGE_atikmpag.sys

BUCKET_ID:  X64_0x116_IMAGE_atikmpag.sys

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_0x116_image_atikmpag.sys

FAILURE_ID_HASH:  {83e844bc-fe68-2042-4230-7f5d3e90b48a}

Followup: MachineOwner
---------

2: kd> lmvm atikmpag
start             end                 module name
fffff880`06800000 fffff880`06896000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Fri Nov 21 07:38:54 2014 (546E9EB6)
    CheckSum:         00093077
    ImageSize:        00096000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
Reply

 BSOD after "No HDMI signal"




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Monitor displays "no signal" when HDMI is used
Alrighty guys, i have a problem. About a week ago, my PC was running just fine. My monitor was also running fine(Im using a HDMI cable for my monitor). Then one morning i turn on my PC, and my monitor displays "no signal" with a black background. So i try using the VGA cord and poof! It works!...
Hardware & Devices
HDMI not working with TV "No Signal" - do I need a new Graphics Card?
Hey guys, For the past few years I have been running a HDMI cable to my TV. I also have a DVI going to a monitor. I have it so when the HDMI is in, the screen is automatically on TV, if HDMI is out, it will go to monitor - ease of use when watching films on larger screen. Zero issues up until...
Graphic Cards
Wifi signal fine, but getting ( "!" ) error msg and lost connection.
My wifi signal is fine, but I've been getting a yellow ( "!" ) error msg over the wifi icon and losing connection every 5 minutes or so. Some quick background....... (Recently upgraded my dsl speed from ISP provider. Same modem and wifi router, but I did reset them a couple of weeks ago, but the...
Network & Sharing
BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"
Hi everyone! Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two...
BSOD Help and Support
New Monitor reports "No Signal" with display driver enabled
How can this be so hard? Why does Windows make it impossible to change monitors? Here's a summary of the problem, with details below: System: Windows 7-64 HomePremium SP1 with all important updates, Radeon HD 4830 video card. Gigabyte MB, Intel E8500 CPU, 8GB memory. My old monitor gave...
Graphic Cards
I have a HDMi "output" can I use as "input" to capture?
I want to capture like something that uses HDMi e.g. Xbox330 Or my from new ROgers HDPVR. I wanted teh highest quality Can I capture through the hdmi port I use for outputting HDMI Or what would I have to use to capture from my HDPVR HP dv7-2078ca PC Specifications ...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App