BSOD and Display Driver Crashing

OK, great. Now we wait, I guess.

Hello again, Richiebro72. I'm not sure what to tell you. I know you ran memtest86+ before, but

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 50, {fffffd58d3b636f4, 1, fffff80002e4d7f0, 7}
Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiDeleteAllHashMappings+170 )
Followup: MachineOwner

According to this again, you have bad memory. But, it is possible it is a bad driver.

If you don't already have it, please download and install CPU-Z | Softwares | CPUID
and post screenshots (Screenshots and Files - Upload and Post in Seven Forums) of the CPU, Mainboard, Memory and SPD tabs. On the SPD tabs, you can select each Dimm Slot from a dropdown list in the upper left of the page. Just post the ones that have ram in them.

You might check again for any Gigabyte Utilities such as Easy Tune or even the @BIOS. If you are overclocking anything, please set everything back to defaults.

Did you uninstall the old driver first then clean out the left over parts with DDU? What version does CCC say it is? Your ram timings look OK, but you would get better performance from it if you enable XMP in your BIOS.

You are not the only one having issues from Rust. BSOD Playing Rust - Bing . However, I would caution you to check here first before trying any of the "fixes" you read about. Many of the 'fixes' you find on the internet for almost any problem will give you more trouble than you are having now. Have you verified the game files?