Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: multiple bsod by ntoskrnl.exe, 0x0000000a, 0x0000001e, 0x00000050

12 Mar 2015   #11
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

In less than 7 -8 passes, memtest86+ results are not reliable. And it will take a time with 8 GB RAM.

Here the primary suspect is the memory. Not the RAM only, but also the DIMM slots too. That is why the test is necessary.

If the test is not properly done, there will always remain a chance that the troubleshooting did not cover the primary aspects of the issue.

The more passes it runs, th better results it gives. But 8 passes is a fair amount of test.

If it turns out to be no error at all, we will pay attention to teh other possible aspects of the issue, which may take more time.


My System SpecsSystem Spec
.
12 Mar 2015   #12
skysurferdude12

Windows 7 Ultimate
 
 

Ran memtest. No errors. I am re uploading all dump files which has a lot more bsod's, same ones mostly. I can't keep running these long tests on brand new equipment. I"d like to be certain it is in fact faulty hardware. I need help trying a shotgun trial and error approach. I can return all my parts including the 2 used parts I bought which was cpu and gpu. I don't have much time left on return. I have swapped out and tried different parts with all except motherboard and cpu. I am getting a new motherboard tomorrow so I will swap out and see if that fixes. I don't think its gpu because I had a older gpu I put and I still got bsod errors. After that if I still get bsod's last thing would be to swap out cpu, which I think I am going to do tomorrow night if I have errors again on new motherboard. Keep in mind I have done a fresh install everytime I swapped parts. Always updated all drivers and did all windows updates everytime. I will do again with new mb. If that doesn't take care, once more with new processor. If that doesnt' work, I will give up and just return all and take some loss on shipping.
My System SpecsSystem Spec
12 Mar 2015   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Two of today's BSODs are stop 0x50 and one is 0x1E.

The 0x50 ones are not saying anything about the BSOD other than a hardware error, but the 0x1E one causes symbol error, which indicates that it may be a third party hardware controlling driver that is causing that issue.

Do the following things one by one ....

► Uninstall the following things:
  • Start Menu\Programs\ASRock Utility
  • Start Menu\Programs\ASRock Utility\InstantBoot
  • Start Menu\Programs\Fatal1ty Utility
  • Start Menu\Programs\Fatal1ty Utility\F-Stream Tuning
  • Start Menu\Programs\MagicDisc
  • Start Menu\Programs\MagicISO
► Stop ox50, as described in Carrona.Org ....
Quote:
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
And you have McAfee installed. Which I did not notice earlier. McAfee alone can cause all those issues. Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

► Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Now run the computer normally. If it BSODs again in this state, we will stress the drivers.
My System SpecsSystem Spec
.

12 Mar 2015   #14
skysurferdude12

Windows 7 Ultimate
 
 

Thank you. I am uninstalling all right now. I had a 0x0000000a IRQL_NOT_LESS_OR_EQUAL happen after posting bsod dump files( that happened before I left for work and while browsing internet). That was ten this morning, none after that and pc was on for 6 hours in idle. Anyways, I know how to make it bsod though, try to install that one game. It happens always during that but it happens random too and that the part I don't like. Will post update soon/. Thank you so much for all your help and taking the time to respond. I really appreciate it.
My System SpecsSystem Spec
12 Mar 2015   #15
skysurferdude12

Windows 7 Ultimate
 
 

Uninstalled all the recommended things. As soon as I went to install that game, I got bsod with error 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA. It has to be hardware like you said, but I don't think it's ram. Maybe it can be, I have read on other forums that some mem tests have taken over 100 hours. But it just gets me cause I just tested ram, have tried other ram that has been running in pc for years and even another brand new stick of ram. Couldn't it be slots on motherboard if it is memory related? Any way this could be my processor?
My System SpecsSystem Spec
12 Mar 2015   #16
skysurferdude12

Windows 7 Ultimate
 
 

I also asked if it's processor related because I don't know if you read all my posts. I used to get a clock watchdog timeout error 0x124 really bad at first. Pc wouldn't stay on 5 to ten mins with out bsod or random hang. But after changing voltage settings to manual from auto in mb, that problem disappeared.
My System SpecsSystem Spec
12 Mar 2015   #17
skysurferdude12

Windows 7 Ultimate
 
 

It was my motherboard. I got a new one. Everything works flawless. Did a fresh install. Not one single bsod. All updates ran fine and fast. The game I couldn't install and would bsod on, installed and runs fine. I had a bad feeling about that board when default settings wouldn't work on processor. Anyways thanks for all the help. If I have any problems in the future, I"ll come back here. Thanks.
My System SpecsSystem Spec
13 Mar 2015   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

All is well that ends well.
My System SpecsSystem Spec
Reply

 multiple bsod by ntoskrnl.exe, 0x0000000a, 0x0000001e, 0x00000050




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b
Dear experts, after just too many days of troubleshooting (please disregard the former thread) I decided to flash the BIOS, then re-format my SSD and re-install Windows 7 including all drivers the device manager asked for. Apart from BlueScreenView, SF Diagnostic Tool, 7zip and Dropbox, I...
BSOD Help and Support
BSOD 0x0000001e and 0x0000000a
Hi, I am getting frequent BSODs when the PC is idle or under load (it runs a light simulation software, no games, internet browser, etc.). Although enabled, no minidump is written, hence I can't zip one up and post it here. What I did so far (multiple times, spending too many days): I...
BSOD Help and Support
Random BSOD multiple errors: 0x000007e, 0x00000050, 0x0000001e, 0x0000
I have been dealing with BSOD for a while now, they seem to be occurring mostly during web browsing (Firefox) and listening to music (Zune software).
BSOD Help and Support
BSOD 0x00000050 and 0x0000000a when playing games
Hello. I've been getting blue screens recently when playing games. Ntoskrnl.exe has been in all of the crash dumps and the bug check codes have been either 0x0000000a and 0x000000050. Win32k.sys has also appeared in the crash dumps. This hasn't happened during every game but it happens...
BSOD Help and Support
BSOD on start up, error 0x0000000a , 0x00000050
Problem description My problem is as follows: When the computer has been turned off for at least a few hours, I'm getting BSOD's while booting but it is rarely. When cold booting (computer has been turned off for at least several hours), I get a BSOD just after the Windows 7 `Starting...
BSOD Help and Support
Random BSOD - error 0x0000000a and 0x00000050
Been having random BSOD for the past week or so. Started on Sunday (11-27-11), where I had come back to my machine and it had been restarted... after logging in, find out that it was a BSOD. I then proceded to have 3 different BSOD events on Monday, which led me to perform a memtest on Tuesday...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App