Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Stop Error 0xF4 - CRITICAL_OBJECT_TERMINATION

17 Mar 2015   #11
Chris2005

Windows 10 Home x64
 
 

Still haven't had another occurrence of that BSOD... could it possibly have been a one time bug/fluke?


My System SpecsSystem Spec
.
17 Mar 2015   #12
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

No, I think the firmware updated fixed it.
My System SpecsSystem Spec
17 Mar 2015   #13
Chris2005

Windows 10 Home x64
 
 

Quote   Quote: Originally Posted by Golden View Post
No, I think the firmware updated fixed it.
Alrighty. Then I'll mark this as solved.
My System SpecsSystem Spec
.

19 Mar 2015   #14
Chris2005

Windows 10 Home x64
 
 

Well, my computer just had the same BSOD...

I also get a 0xc000000F on boot, going into my BIOS, my OCZ ARC-100 isn't listed at all... I turn my computer off and then back on and it's fine again... I hope I don't have to RMA this SSD.

I also had a dump for BugCheck 3B...
My System SpecsSystem Spec
19 Mar 2015   #15
Chris2005

Windows 10 Home x64
 
 

Just for the sake of I installed the latest chipset drivers, etc. from my motherboard manufacturers website just on the off chance they weren't up-to-date, now I haven't got USB 3.0 support because the VIA USB 3.0 drivers won't install and it's clearly enabled in my BIOS.

The setup says it can't find any valid hardware. It was listed under my devices prior to the chipset drivers being installed... now it's not. :/
My System SpecsSystem Spec
19 Mar 2015   #16
Chris2005

Windows 10 Home x64
 
 

Well, I ran sfc /scannow, no problems found.

I checked all the cables, unplugged them, plugged them back in, etc.

I'm not sure what else to do, short of re-installing Windows in the hopes that fixes the problem... I got this drive on February 27th.

And my USB 3.0 entries are back under Device Manager... O.o
My System SpecsSystem Spec
21 Mar 2015   #17
Chris2005

Windows 10 Home x64
 
 

I replaced all the SATA cables today, unplugged and plugged back in, so let's hope it was a cable issue... I hope.

Didn't have this issue until the new SSD, which I got on the 24th of last month, first BSOD was on the 11th of this month, then again the 18th, same program was suspect, smss.exe.
My System SpecsSystem Spec
21 Mar 2015   #18
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Quote   Quote: Originally Posted by Chris2005 View Post
I also get a 0xc000000F on boot, going into my BIOS, my OCZ ARC-100 isn't listed at all... I turn my computer off and then back on and it's fine again... I hope I don't have to RMA this SSD.
Those symptoms suggest something disk-related. lets see what the new cables do.
My System SpecsSystem Spec
21 Mar 2015   #19
Chris2005

Windows 10 Home x64
 
 

Quote   Quote: Originally Posted by Golden View Post
Those symptoms suggest something disk-related. lets see what the new cables do.
Alright. I mean it was odd that the same BSOD happened almost exactly 7-days apart... plus/minus a few hours/minutes... BSOD on the 11th, then again on the 18th...
My System SpecsSystem Spec
21 Mar 2015   #20
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Please do the following:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode
My System SpecsSystem Spec
Reply

 Stop Error 0xF4 - CRITICAL_OBJECT_TERMINATION




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Error 0xF4 CRITICAL_OBJECT_TERMINATION 1 hour after cold boot
Hello, and thanks in advance. I am working remotely with a computer owned by a family member of mine. The computer is running: - Windows 7 Professional 64-bit - System was built by me in the past - This version of windows comes free via the MSDN where I am a student (so full retail I think)...
BSOD Help and Support
0xf4 BSOD Critical_Object_Termination
After a clean install of Windows 7 x64 on my new Crucial M4 SSD, I am getting random f4 bsod's. Even after a repair install I still continue to get these.
BSOD Help and Support
BSOD playing games (Diablo 3), error 0xF4 Critical_Object_Termination
Running Windows 7 Ultimate x64, purchased for new build (not OEM). Computer was built in April: CPU: I7-2700K (Running @ stock), After-market cooler Motherboard: ASROCK|Z68 EXTREME3 GEN3 1155 R RAM: CORSAIR CMZ8GX3M2A1600C9 4GBx2 Video: EVGA GeForce GTX 560 Ti FPB 1024 MB GDDR5 SSD: 180...
BSOD Help and Support
CRITICAL_OBJECT_TERMINATION 0xf4 in new pc build ntoskrnl+7cc80
Hi All, I have recently built a new pc but it keeps blue screening. It happens at random times but it is very frequent. It has happened 3 times while attempting to write this post. I have looked at all the crash dumps in BlueScreenView.exe and the driver at fault seems to be ntoskrnl.exe...
BSOD Help and Support
BSOD-Stop 0xF4
Hey guys. I'm back with another BSOD. This time, what happened was when I first switched on the com, there was a message saying (from memory because I forgot to write it down) "The file C:\windows\winsxs\manifest\amd_64...soemthing something is corrupt and unreadable. Run CHKDSK utility. " So I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App