Games closing while playing with BSOD and without BSOD

One of the 2 3/10 dumps says Memory Corruption. The other says

Code:

Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff8800133b46a, fffff880033d9298, fffff880033d8af0}
Probably caused by : iaStorA.sys ( iaStorA+6846a )
Followup: MachineOwner

Code:

iaStorA
start             end                 module name
fffff880`012d3000 fffff880`01596000   iaStorA  T (no symbols)           
    Loaded symbol image file: iaStorA.sys
    Image path: \SystemRoot\system32\DRIVERS\iaStorA.sys
    Image name: iaStorA.sys
    Timestamp:        Thu Mar 13 18:52:06 2014 (532244A6)
    CheckSum:         000A4056
    ImageSize:        002C3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

That is from Intel Rapid Storage Technology (IRST)

Please try to update the IRST driver from your Motherboard web site or from Intel Download Center. It will be easier from your motherboard's site. Also please run the long and short test of Seatools for DOS
SeaTools for DOS and Windows - How to Use Also please run Check Disk Disk Check

I'm glad you have it working, congratulations. If you will go to Control Panel (Category View)> Uninstall a Program> select Intel Rapid Storage Technology, then click uninstall, it will uninstall it for you.

Ok million times thanks for you man, you are really helped me so much and your solution give me a rest at last. What i really did that i unistalled Intel Rapid Storage Technology from Control Panel, but not just that was really helped me. Also I uninstalled Intel(R) 8 Series Chipset Family SATA AHCI Controller ( IDE ATA/ATAPI controllers ) in Device Manager and make use of standard SATA AHCI Contoller but even that never solved my issue.
What is really helped me and solved my issue is by updating drivers ( iastorA.sys and iastorF.sys ) and that was by updating manually Intel(R) 8 Series Chipset Family SATA AHCI Controller ( IDE ATA/ATAPI controllers ) in Device Manager. I just wrote what i did because may be could help others that have that issue. I have NO MORE BSOD AND NO MORE CRASHING. THANK YOU SO MUCH, AND GOD BLESS YOU.

Thank you and thanks for getting back to let us know. I hope everything runs well for you. If not we are open 24/7.

I'm glad it is working like you want it. You are more than welcome for whatever help I gave. Now, play some games and enjoy your computer.

You are welcome and I am glad you have your computer working right.

I had a new BSOD that said DRIVER_POWER_STATE_FAILURE (BSOD) when put my PC into a sleep mode, and that happened only when i put my PC in a sleep mode. I read about the problem and some people had that because of Bluetooth driver ([SOLVED] ntoskrnl.exe (DRIVER_POWER_STATE_FAILURE) - Windows 7 x64 - Sysnative Forums) so i disabled bluetooth from Bios because i have never ever needed to use. After that i put in a sleep mode with no more crashing and BSOD. The BlueScreenView gave me that result

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: ntoskrnl.exe

DRIVER_POWER_STATE_FAILURE

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x0000009f (0x0000000000000004, 0x0000000000000258, 0xfffffa8009a57b50,
0xfffff800053543d0)

*** ntoskrnl.exe - Address 0xfffff80003cd4ec0 base at 0xfffff80003c60000 DateStamp
0x54d0317d

When i ran SFC it gave me

C:\Windows\system32>sfc /scannow

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 10% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example
C:\Windows\Logs\CBS\CBS.log

I just want to know what is real cause of that issue ??? And can i account on Bluescreenview or sometimes give a non correct answer??