Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD multiple errors 116, 117

04 Apr 2015   #31
woodhouse

 
 

Here is the link: http://speccy.piriform.com/results/m...dX5xvEU0VOcJFz


My System SpecsSystem Spec
.
04 Apr 2015   #32
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Thank you for the Speccy report.
Lots of information for you and us to look at.

***Check you voltages in your bios because Speccy is indicating low volts in the +5 and high volts in the +12.
It could be false readings by Speccy.

Motherboard
Manufacturer:
Alienware
Model:
07JNH0 (CPU 1)
Version:
00
Chipset Vendor:
Intel
Chipset Model:
Sandy Bridge-E
Chipset Revision:
07
Southbridge Vendor:
Intel
Southbridge Model:
X79
Southbridge Revision:
06
System Temperature:
42 C
BIOS
Brand:
Alienware
Version:
A11
Date:
11/26/2013

Voltage
+3.3V:
3.312 V
CPU CORE:
1.376 V
VIN2:
2.304 V
VIN3:
1.294 V
+5V:
3.784 V
+12V:
15.752 V
VIN6:
3.344 V
VSB3V:
3.296 V
CMOS BATTERY:
3.328 V
My System SpecsSystem Spec
04 Apr 2015   #33
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

This is why I don't understand why you had to remove memory to get your system to work.


alienware 07jnh0 (a00) mainboard specs


4 x 240-pin DDR3 DIMM slots Supports (Quad-Channel) DDR3 1866/1600/1333 MHz non-ECC, un-buffered memory – (Max 32GB)

Be sure and check your power supply voltages in the Bios.

Also, what brand is your power supply? It's not in your specs.
My System SpecsSystem Spec
.

04 Apr 2015   #34
woodhouse

 
 

Well i just removed 2/4 rams (maybe 1 is broken or something). The power supply is also alienware made i think. Can you please be more specific about the voltage ? I dont understand what i need to check...
My System SpecsSystem Spec
04 Apr 2015   #35
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Look in BIOS for your Voltage. You need the values of your +12V, +5V and +3.3V. Speccy may have read them wrong, but it has your +12V at 15.72V, +5V at 3.7V. ATX standards are +/- 5% which means your +12V should be no more than 12.6V and your +5V no less than 4.75V. Your voltages according to Speccy are way out of specs. The BIOS is the most accurate reading of voltages.
My System SpecsSystem Spec
04 Apr 2015   #36
woodhouse

 
 

Ok so i used another program CPUID HWMonitor to read voltages and they were same as speecy (12-15 and 5-3). I also uploaded some images from bios (this is all i could find).

If this is true then it's a big problem ...
My System SpecsSystem Spec
06 Apr 2015   #37
woodhouse

 
 

Anything else i could do ?
My System SpecsSystem Spec
06 Apr 2015   #38
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

You could show the voltages as suggested.

In your bios look in the Power section.
My System SpecsSystem Spec
Reply

 BSOD multiple errors 116, 117




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Multiple BSOD errors
I have been experiencing multiple BSOD errors for the last week. For a while no minidumps were created but after re-imaging my drive it seems some (not all) have been logged. Since this problem began I have had various games crashed. Chrome tabs crashing. Atleast 2 of the games that were crashing...
BSOD Help and Support
BSOD Multiple times multiple errors 0x0000001A
Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I...
BSOD Help and Support
Multiple BSOD's with multiple errors occuring randomly
Just realized I uploaded the wrong zip folder, It doesn't have everything in it. Fixed that now though! Sorry about the hassle! So I built my own PC a a good few months back, and within a month I experienced a BSOD, and now they are very frequent. They can happen three or four times a day, or...
BSOD Help and Support
BSOD errors. multiple times during multiple programs
windows 7 x64 - original install on system but i don't have my disks. they are somewhere... - full retail version installed - age of the system is approximately 3 years - age of the install is approximately 2 years it seems to happen at random but i get BSODs. approximately 2-3 times a day...
BSOD Help and Support
Multiple BSOD, Multiple STOP errors
I hope someone can help. I have been recieving many random (to me) BSOD's. The (Two month old) laptop gets so many that it cannot be booted into any Windows mode (including safe mode). My only option is to restore the PC using HP's F11 (factory restore). I have managed to capture two .dmp...
BSOD Help and Support
multiple BSOD errors
first off i apologize if there is anything mis formatted or missing i attempted to follow the posting guide as close as possible. ( i will try to frequently check this thread to make sure anyone needing info receives it ) Windows 7 32-bit Retail not sure on age of install but my guess is about...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App