Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Few different BSOD at random times

16 Mar 2015   #1
MirkovicTNT

Windows 7 Ultimate x64
 
 
Few different BSOD at random times

I get random different BSOD errors


My System SpecsSystem Spec
.
16 Mar 2015   #2
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Hello, MirkovicTNT. I will try to help you with this. First please add the manufacturer and model of you PSU to your system specs. You did very well filling those out. Also, most of the files were missing from the uploaded files. Please re run the www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html#option2 and upload all of the files.

You had 6 dump files, 5 today and one Yesterday. They all give different stop codes and several different reasons. Here is what they said.

Code:
fffff880`083176a8  fffff880`048cb67aUnable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0xb067a
Code:
 atikmdag
start             end                 module name
fffff880`0481b000 fffff880`053ce000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Mon Apr 29 21:07:09 2013 (517F274D)
    CheckSum:         00B6397D
    ImageSize:        00BB3000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your graphics driver and as you can see, needs to be updated. Please do it this way.

I am going to give you some links that will help you get a good clean install and not have any drivers you don't need that will conflict with other drivers. Download a WHQL driver from Latest AMD Catalyst Video Driver for Windows 7 . Once you have them downloaded, uninstall you current driver from control panel. next clean up any left over drivers from following this tutorial Drivers - Clean Left over Files after Uninstalling and select only ATI Display Drivers. After you have done that and rebooted, install the new driver, only select custom install and install only what you have to. Very few people need most of what they include. You do not need the audio/HDMI drivers as you already have that in your Motherboard drivers. Unless there is some reason you need them, the only thing you really need is the Display Driver.

Also was
Code:
fffff800`00b99b38  fffff880`0406f337Unable to load image Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
 Rt64win7+0x5337
Code:
 Rt64win7
start             end                 module name
fffff880`0406a000 fffff880`0409c000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Thu Feb 26 03:04:13 2009 (49A65B0D)
    CheckSum:         0002EB30
    ImageSize:        00032000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
That is your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC, and needs to be updated. You should be able to update it from your motherboard site for your motherboard.

This is the one which concerns me most.

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 4E, {99, 347c8, 2, 6a5ee}
Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )
Followup: MachineOwner
That is your ram and if this is true it could make every dump file give wrong information. Also, all of your dump files listed different error and bug codes which is a sign of faulty ram.

Please Run Memtest86+

information   Information
Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes, all run at the same time, to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.
My System SpecsSystem Spec
17 Mar 2015   #3
MirkovicTNT

Windows 7 Ultimate x64
 
 

Hello essenbe,thx for reply. I added PSU in system spec : MS Industrial MS-500. Also i re-upload files. I followed all instructions and did everything about graphics driver. About Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC should i download Realtek PCI-E Ethernet Drivers from MSI Global - The best gaming gears maker in the world ? I tested RAM with memtest86 few weeks ago but i only did 2 passes,i will test again and this time 8 passes.
My System SpecsSystem Spec
.

17 Mar 2015   #4
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I would download it and see if there s a newer version. The version you have is 2009, so a newer one shouldn't be too hard. Let me know how memtest86+ comes out.
My System SpecsSystem Spec
18 Mar 2015   #5
MirkovicTNT

Windows 7 Ultimate x64
 
 

I tested RAM with Memtest86, Pass: 8 Error: 0 . But i still get BSOD, got 3 today.
My System SpecsSystem Spec
18 Mar 2015   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

MirkovicTNT, Again you have 3 different dumps with different stop codes and reasons.

Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffffa80018372b0, the pool entry being checked.
Arg3: fffffa80018372e0, the read back flink freelist value (should be the same as 2).
Arg4: fffffa80018372b0, the read back blink freelist value (should be the same as 2).
 
 
fffff880`084755b8  fffff880`02d2125fUnable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0x625f
That is your video card driver

Code:
MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000005001, The subtype of the bugcheck.
Arg2: fffff781c0000000
Arg3: 000000000000240b
Arg4: fffff8a0036ad009
Memory again

Code:
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000200000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
 bit 0 : value 0 = read operation, 1 = write operation
 bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800030c6f35, address which referenced memory
Be sure to make a restore point before doing anything. The link is below for how to do it. Please sort thr drivers by provider and enable all drivers not provided by Microsoft.

warning   Warning
Be sure to create a System Restore point before proceeding further System Restore Point - Create


Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
information   Information

What is Driver Verifier:
It puts stress on the drivers, and tries to make the faulty driver crash the computer. It is designed this way, to attempt to trap the offending driver.


What you will notice:
It will tend to make the computer rather slow and sluggish because the drivers are being stressed.
warning   Warning

Before enabling DV, make sure you have created a system restore point before enabling Driver Verifier. make a System Restore Point manually before enabling DV.


Tip   Tip




Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
18 Mar 2015   #7
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Is this the power supply your system has?

http://www.itsvet.com/proizvod/ms-in...upply/163/1051
My System SpecsSystem Spec
18 Mar 2015   #8
MirkovicTNT

Windows 7 Ultimate x64
 
 

Yes that is my power supply.
My System SpecsSystem Spec
19 Mar 2015   #9
MirkovicTNT

Windows 7 Ultimate x64
 
 

I created restore point and enabled driver verifier. I didn't get BSOD but few min after my screen froze and didn't respond to anything so i restarted pc but system couldn't start up so i turn power off and later i turned back power on and it started. Then i disabled verifier and created restore point again and did same thing again and like the first time screen froze and rest was the same as the first time.
My System SpecsSystem Spec
19 Mar 2015   #10
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Please upload the Blue Screen of Death (BSOD) Posting Instructions Again to see if it may provide some further info. By turning the power off and back on made it start, it sounds like a power supply problem.
My System SpecsSystem Spec
Reply

 Few different BSOD at random times




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD at random times, at least 3 times per week. Win 7 64 Ultimate
This is my custom build computer of 4 - 5 years. The past year or so i keep getting random BSOD. There are times right after i do a windows update, the very next day my computer will crash. I am running the latest nvidia drivers, and also run windows update. Some times the error says Memory...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSOD. 2 or 3 times a day at Random times.
Hi. I get a BSOD on my computer at most, twice a day. I am not sure what causes it as it happens at random times in the day. I have attached the SF Diagnostic File if that helps. Thanks, Kieran
BSOD Help and Support
BSoD at random times and pink graphics at times,
Hello, New member here and thanks in advance for looking. I have a home built w7 Home Premium box we use almost exclusively for Windows Media Center. I started getting bsod's about a month ago and before that got distorted *pinkish* video on restart or bootup at times. Tried using...
BSOD Help and Support
BSOD at random times, 2 times/day in the last 4 days
Hi, I have started getting BSODs twice a day at random moments on my computer in the last 4 days. I've tried to figure out the reason for the BSODs but I'm not sure. I often get the * Hardware failure * bsod. Now I know these can be caused by a number of things, so that is why I included with...
BSOD Help and Support
BSOD at random times, other times just lock up
I have been getting BSOD's for the last week or so. I can't read the entire screen in time when it happens but I do catch something about a hardware issue. This has happened several times while playing video games, but others when surfing the web, or just doing some typing. I've checked all of...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App